ANSIO 2 x 100 LED Micro Copper Wire USB Lights with Remote - Warm White - User Manual

1. Pengenalan

Thank you for choosing the ANSIO 2 x 100 LED Micro Copper Wire USB Lights with Remote. This manual provides essential information for the safe and effective use of your new lighting product. Please read these instructions carefully before installation and operation, and retain them for future reference.

These lights feature 100 warm white LEDs on a flexible copper wire, powered via USB, and controlled by an included remote. They are designed for indoor decorative purposes, offering various lighting modes and a timer function.

Image: Two sets of ANSIO 2x100 LED Micro Copper Wire USB Lights, coiled, showcasing their compact form and warm white glow.

2. Maklumat Keselamatan

• Penggunaan Dalaman Sahaja: This product is designed for indoor use. Do not expose to water, moisture, or outdoor elements.
• Sumber Kuasa: Use only with a compatible USB power source (e.g., USB wall adapter, power bank, computer USB port) that provides 5V DC. Ensure the power source meets safety standards.
• Elakkan Terlalu Panas: Do not cover the lights or power adapter during operation. Ensure adequate ventilation.
• Tangani dengan Berhati-hati: The copper wire is flexible but can be damaged if bent excessively or sharply. Avoid pulling or tugging on the wire.
• Kanak-kanak dan Haiwan Kesayangan: Keep the product out of reach of small children and pets to prevent entanglement or ingestion of small parts.
• kerosakan: Do not operate the lights if the wire, LEDs, or USB connector are damaged. Discontinue use immediately and contact customer support.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

• 2 x 100 LED Micro Copper Wire USB Lights (Warm White)
• 1 x Alat Kawalan Jauh
• 1 x Manual Pengguna (dokumen ini)

4. Persediaan

1. Buka Bungkus Lampu: Carefully remove the lights from their packaging. The copper wire is delicate; uncoil it gently to avoid tangling or damage.
2. Masukkan Bateri Jauh: The remote control typically comes with a small plastic tab to prevent battery drain. Pull this tab out before first use. If the remote does not work, ensure the battery (CR2025 or similar, usually included) is correctly inserted with the positive (+) side facing up.
3. Letakkan Lampu: Determine your desired display area. The flexible copper wire allows you to shape the lights around objects, along shelves, or within decorative arrangements. The lights feature a 1m clear lead wire and approximately 10m lit length per strand.
4. Sambung ke Kuasa: Plug the USB connector of the light strand into a compatible 5V USB power source. The lights should illuminate.

Imej: Dari dekat view of the ANSIO Micro Copper Wire LED Lights, highlighting the small, bright LEDs on the thin copper wire.

5. Arahan Operasi

The ANSIO Micro Copper Wire USB Lights are controlled using the included remote. Ensure the remote is pointed towards the USB receiver for optimal functionality.

Image: ANSIO Micro Copper Wire LED Lights adorning a Christmas tree, with the remote control visible in the foreground, demonstrating its use.

Fungsi Kawalan Jauh:

• HIDUP/MATI: Tekan untuk menghidupkan atau mematikan lampu.
• DIM+/DIM-: Adjust the brightness level of the lights.
• 1-8 (Mode Selection): Select from 8 different lighting modes. These typically include combinations like waves, sequential, slo-glo, chasing/flash, slow fade, twinkle/flash, and steady on. Experiment to find your preferred mode.
• PEMASA: Activate the timer function. When pressed, the lights will stay on for 6 hours and then automatically turn off for 18 hours, repeating the cycle daily. To deactivate the timer, press the TIMER button again or turn the lights off and on manually.

6. Penyelenggaraan

• Pembersihan: Ensure the lights are unplugged from the power source before cleaning. Gently wipe the copper wire and LEDs with a soft, dry cloth. Do not use liquid cleaners or immerse any part of the product in water.
• Storan: When not in use, carefully coil the lights and store them in their original packaging or a suitable container to prevent tangling and damage. Store in a cool, dry place away from direct sunlight.

7. Penyelesaian masalah

Isu dan Penyelesaian Biasa:

• Lampu tidak menyala:
  • Ensure the USB connector is fully inserted into a working USB power source.
  • Cuba sumber kuasa atau penyesuai USB yang lain.
  • Check if the remote control battery is correctly inserted and has power. Remove and reinsert the plastic tab if present.
  • Point the remote directly at the USB receiver.
• Alat kawalan jauh tidak berfungsi:
  • Replace the remote control battery (typically CR2025).
  • Pastikan tiada halangan antara alat kawalan jauh dan penerima USB.
  • Confirm the remote is pointed towards the USB receiver.
• Lampu berkelip-kelip atau malap tanpa diduga:
  • Check the USB power source for stable output. A low-power USB port might cause issues.
  • Pastikan sambungan USB selamat.
  • If using the timer function, the lights will turn off after 6 hours.

If you experience persistent issues not covered here, please contact ANSIO customer support.

8. Spesifikasi

9. Waranti dan Sokongan

ANSIO products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please refer to the contact details provided with your purchase or visit the official ANSIO webtapak.

Sila simpan bukti pembelian anda untuk sebarang tuntutan waranti.