Globo Lighting BOSTON Outdoor Pedestal Light

1. Pengenalan

Thank you for choosing the Globo Lighting BOSTON Outdoor Pedestal Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Image 1.1: The BOSTON outdoor pedestal light providing illumination along a pathway.

2. Arahan Keselamatan

• Keselamatan Elektrik: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before installation, maintenance, or bulb replacement.
• Penggunaan Luaran: This fixture is designed for outdoor use. Ensure all connections are waterproof and sealed appropriately to prevent water ingress.
• Jenis Mentol: Use only E27 bulbs with the specified wattage. Jangan melebihi wat maksimumtage ditunjukkan pada lekapan.
• Pengendalian: Kendalikan lekapan dengan berhati-hati. Elakkan daripada menjatuhkan atau menyebabkannya terkena hentaman kuat.
• Pembersihan: Jangan gunakan pembersih atau pelarut yang kasar. Bersihkan dengan pembersih yang lembut danamp kain.
• haba: Biarkan mentol sejuk sepenuhnya sebelum cuba menggantikannya.

3. Kandungan Pakej

Sila pastikan semua komponen ada dan tidak rosak sebelum memulakan pemasangan:

• 1x BOSTON Outdoor Pedestal Light Fixture (Model 105701)
• 1x Pangkalan Pemasangan
• 1x Set of Mounting Hardware (screws, anchors)
• 1x Manual Pengguna

Note: E27 bulb is not typically included and must be purchased separately.

4. Spesifikasi

5. Persediaan dan Pemasangan

Penting: Ensure the main power supply is switched off at the circuit breaker before commencing installation.

1. Pilih Lokasi: Select a suitable outdoor location for the pedestal light, ensuring it is on a stable, level surface and has access to the necessary electrical wiring.
2. Sediakan Pendawaian: If not already present, run appropriate outdoor-rated electrical cable to the installation point. Consult a qualified electrician for this step.
3. Lekapkan Pangkalan: Position the mounting base on the desired surface. Mark the drilling points through the holes in the base. Drill pilot holes and secure the base using the provided mounting hardware (screws and anchors). Ensure the base is firmly attached.
4. Sambungkan Wayar Elektrik: Carefully connect the electrical wires from your power supply to the terminals inside the fixture. Follow the standard wiring color codes (e.g., Live, Neutral, Earth). Ensure all connections are secure and properly insulated.
5. Pasang Mentol: Insert a suitable E27 bulb (not included) into the lamp pemegang. Jangan terlalu ketat.
6. Lekapan Selamat: Attach the main body of the pedestal light to the mounted base, ensuring it is securely fastened and sealed against moisture.
7. Pulihkan Kuasa: Setelah pemasangan selesai dan semua sambungan selamat, pulihkan kuasa pada pemutus litar utama.

Image 5.1: The pedestal light installed on a patio, demonstrating a typical mounting scenario.

6. Arahan Operasi

The BOSTON Pedestal Light features an integrated motion sensor for automatic operation.

• Hidupkan kuasa: Once installed and power is restored, the light will enter a warm-up period (typically a few seconds) before the motion sensor becomes active.
• Penderia Gerakan: The integrated motion sensor detects movement within its detection range. When motion is detected, the light will illuminate.
• Matikan automatik: After a period of no detected motion, the light will automatically turn off. The duration of illumination is typically pre-set or adjustable via controls on the sensor (if available). Refer to the sensor's specific markings for adjustment options.
• Sensor Siang/Malam: The motion sensor also includes a photocell that prevents the light from activating during daylight hours, conserving energy. The light will only activate due to motion when ambient light levels are low enough.

Image 6.1: Detail of the motion sensor on the pedestal light, highlighting its detection area.

Image 6.2: The pedestal light operating at night, with the motion sensor detecting movement.

7. Penyelenggaraan

• Pembersihan: Bersihkan lekapan secara kerap dengan lembut, damp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive materials, as these can damage the finish or plastic components.
• Penggantian mentol:
  1. Ensure the power supply to the fixture is turned off at the circuit breaker.
  2. Benarkan mentol lama sejuk sepenuhnya sebelum menyentuhnya.
  3. Carefully unscrew the top cover or access panel to reach the E27 bulb.
  4. Unscrew the old bulb and replace it with a new E27 bulb of the correct wattage.
  5. Securely reattach the cover or access panel, ensuring a watertight seal.
  6. Pulihkan kuasa.
• Pemeriksaan: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly to ensure continued safe operation.

8. Penyelesaian masalah

If you experience persistent issues not covered here, please contact a qualified electrician or the product supplier.

9. Waranti dan Sokongan

This product is covered by the standard warranty provided by the manufacturer. Please retain your proof of purchase for any warranty claims. For technical support or further assistance, please contact your retailer or the Globo Lighting customer service department.

Maklumat perhubungan biasanya boleh didapati pada pembungkusan produk atau maklumat rasmi pengilang webtapak.