58979

CEN-TECH 630 Puncak Amp Portable Jump Starter and Power Pack

Model: 58979

pengenalan

This manual provides important information for the safe operation, maintenance, and troubleshooting of your CEN-TECH 630 Peak Amp Portable Jump Starter and Power Pack. Please read this manual thoroughly before using the product and retain it for future reference.

The CEN-TECH Portable Jump Starter is a versatile device designed to provide 630 peak amps for jump-starting vehicles, a 12V DC power supply, and a bright LED work light. It also features a 10W USB power output for charging personal electronic devices. Built-in safety features protect against reverse polarity, short circuits, low-voltage, overcharging, and over-discharging. The unit includes an easy-to-understand interface with colored LED indicators for battery status and fault detection, powered by a reliable 12V UL-listed sealed lead-acid battery.

CEN-TECH 630 Puncak Amp Portable Jump Starter and Power Pack in its retail box.

Figure 1: CEN-TECH 630 Peak Amp Portable Jump Starter and Power Pack.

Maklumat Keselamatan

Sentiasa patuhi langkah keselamatan berikut untuk mengelakkan kecederaan atau kerosakan pada unit:

  • Baca semua arahan sebelum menggunakan produk.
  • Jangan dedahkan unit kepada keadaan hujan atau basah.
  • Do not operate the unit if it has received a sharp blow, been dropped, or otherwise damaged.
  • Pastikan pengudaraan yang betul semasa penggunaan dan pengecasan.
  • Jauhkan daripada kanak-kanak.
  • Pakai pelindung mata apabila bekerja dengan bateri.
  • Jangan litar pintas terminal output.
  • Sentiasa sambungkan kabel positif (+)amp ke terminal bateri positif (+) dahulu, kemudian terminal negatif (-)amp to a non-moving metal part of the vehicle chassis away from the battery.
  • Putuskan sambungan dalam susunan terbalik: negatif (-) dahulu, kemudian positif (+).
  • Jangan cuba melompat memulakan bateri beku.
  • Do not use this unit as a battery charger for vehicle batteries.
  • This unit contains a sealed lead-acid battery. Recycle properly.

Kandungan Pakej

Sahkan bahawa semua item ada:

  • CEN-TECH 630 Puncak Amp Portable Jump Starter and Power Pack
  • Penyesuai AC
  • Manual Pengguna (dokumen ini)

Persediaan dan Pengecasan Awal

Before first use, fully charge the unit for at least 24 hours. This conditions the battery and ensures maximum performance.

  1. Locate the charging port on the unit.
  2. Connect the supplied AC adapter to the charging port.
  3. Pasangkan penyesuai AC ke soket dinding AC 120V standard.
  4. The charging indicator light will illuminate. Allow the unit to charge until the "Fully Charged" indicator illuminates, or for a minimum of 24 hours for the initial charge.
  5. Setelah dicas sepenuhnya, cabut penyesuai AC.

It is recommended to recharge the unit every 3 months when not in use to maintain battery health and readiness.

Arahan Operasi

Lompat Memulakan Kenderaan

Ensure the vehicle's ignition is off and all accessories (lights, radio, etc.) are turned off. Ensure the jump starter is fully charged.

  1. Sambungkan merah positif (+) clamp ke terminal positif (+) bateri kenderaan.
  2. Sambungkan hitam negatif (-) clamp ke bahagian logam yang tidak bergerak pada casis kenderaan, jauh dari bateri dan saluran bahan api.
  3. Pastikan kedua-dua clamps have a solid connection.
  4. Turn the jump starter's power switch to the "ON" position.
  5. Attempt to start the vehicle. If the vehicle does not start after 5-6 seconds, wait at least 3 minutes before attempting again to allow the jump starter to cool.
  6. Once the vehicle starts, immediately turn the jump starter's power switch to the "OFF" position.
  7. Putuskan sambungan hitam negatif (-) clamp first, then disconnect the merah positif (+) clamp.
  8. Isi semula pemula lompat secepat mungkin selepas digunakan.

Penting: Do not crank the engine for more than 6 seconds at a time. Allow the jump starter to cool for at least 3 minutes between attempts.

Using the 12V DC Power Outlets

The unit features two 12V DC outlets for powering compatible 12V accessories (e.g., portable air compressors, car vacuums). The total output for both outlets is 12V DC.

  1. Ensure the jump starter is in the "ON" position.
  2. Plug your 12V DC accessory into one of the 12V DC outlets.
  3. Operate your accessory as per its own instructions.
  4. When finished, disconnect the accessory and turn the jump starter to the "OFF" position.

Nota: Continuous use of the 12V DC outlets will drain the internal battery. Monitor the battery status indicator.

Menggunakan Port Pengecasan USB

The 2.1A USB charging port provides power for charging smartphones, tablets, and other USB-powered devices.

  1. Ensure the jump starter is in the "ON" position.
  2. Connect your USB device to the USB port using a compatible USB cable.
  3. Your device should begin charging.
  4. When finished, disconnect your device and turn the jump starter to the "OFF" position.

Menggunakan Lampu Kerja

The built-in 3 LED work light provides illumination in low-light conditions.

  • Locate the work light switch/button on the unit.
  • Press the switch/button to turn the light ON.
  • Press again to turn the light OFF.

Penyelenggaraan dan Penyimpanan

Proper maintenance ensures the longevity and performance of your jump starter.

  • Isi semula secara berkala: Recharge the unit every 3 months, even if not used, to maintain the internal battery's charge and extend its lifespan.
  • Pembersihan: Bersihkan unit dengan kain kering dan lembut. Jangan gunakan pembersih atau pelarut yang melelas.
  • Clamp Penjagaan: Pastikan bateri sentiasa bersihamps bersih dan bebas daripada kakisan.
  • Storan: Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the power switch is in the "OFF" position during storage.
  • Penggantian Bateri: The internal sealed lead-acid battery is not user-replaceable. Contact qualified service personnel for battery replacement.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Unit tidak boleh dihidupkan atau dicas.Internal battery is completely discharged or faulty. AC adapter is not connected properly or is faulty.Ensure AC adapter is securely connected and plugged into a live outlet. Allow unit to charge for at least 24 hours. If problem persists, contact customer support.
Kenderaan tidak bermula selepas percubaan melompat.Jump starter battery is low. Clamps are not making good contact. Vehicle battery is severely discharged or faulty.Recharge the jump starter. Ensure clamps are clean and securely connected to the correct terminals. Check vehicle battery condition. Wait 3 minutes between attempts.
USB port or 12V DC outlets not working.Jump starter is not turned "ON". Internal battery is low. Device/accessory is not compatible or faulty.Ensure the jump starter is "ON". Recharge the unit. Test with a different device/accessory.
Overcharge/Over-discharge protection activated.Unit has been charged too long or discharged too deeply.The unit's internal protection system has activated. Disconnect from power source or load. Allow unit to rest, then attempt to recharge or use normally.

Spesifikasi

CiriPerincian
Nombor Model58979
Puncak Amps630 Amps
Merentap Amps330 Amps
Bateri Dalaman12V, 17 Ah Sealed Lead-Acid
Cawangan Kuasa DCTwo 12V DC outlets
Output USB2.1A (10W)
Cahaya KerjaBuilt-in 3 LED
Kabel PenggalakHeavy Duty 7 AWG with Copper Coated Steel Clamps
Berat badan15.9 paun
Standard KeselamatanUL Tersenarai

Waranti dan Sokongan Pelanggan

For warranty information or technical assistance, please refer to the manufacturer's official webtapak atau hubungi sokongan pelanggan mereka secara langsung. Simpan resit pembelian anda sebagai bukti pembelian.

Manufacturer: HFT

Nombor Model: 58979

© 2025 CEN-TECH. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.