Redodo 24V 100Ah LiFePO4 Lithium Battery Instruction Manual

1. Pengenalan

This manual provides essential information for the safe and efficient use of your Redodo 24V 100Ah LiFePO4 Lithium Battery. Please read it thoroughly before installation and operation. The Redodo 24V 100Ah LiFePO4 battery offers a 2560W power output with a 100A Battery Management System (BMS), designed for deep cycle applications. It is suitable for solar off-grid systems, marine use, trolling motors, and backup power solutions, providing up to 15,000 deep cycles.

Image: Redodo 24V 100Ah LiFePO4 Lithium Battery, highlighting its 2560Wh energy capacity.

2. Apa yang ada di dalam Kotak

Selepas membuka pakej, sahkan bahawa semua komponen ada dan tidak rosak:

• 4 x 25.6V 100Ah LiFePO4 Battery (Shipped Separately)
• M8-5/8" Terminal Bolts
• Penutup Penebat untuk Bolt

Image: The Redodo battery package contents, showing the battery, user manual, and M6 terminal bolts.

3. Spesifikasi

Imej: Terperinci view of the battery's dimensions and M8 terminal specifications.

4. Setup (Installation & Connection)

4.1 Langkah Keselamatan

• Sentiasa memakai peralatan pelindung diri (PPE) yang sesuai seperti sarung tangan dan pelindung mata semasa pemasangan.
• Pastikan semua sambungan selamat dan terlindung dengan betul untuk mengelakkan litar pintas.
• Use only recommended lithium chargers for this battery. Do not use for golf carts or car starters.

4.2 Menyambung Bateri

The Redodo 24V 100Ah LiFePO4 battery is designed for straightforward integration into various systems. It features M8 terminals for secure connections.

1. Ensure all power sources are disconnected before making any connections.
2. Connect the positive (+) terminal of the battery to the positive input of your system (e.g., inverter, charge controller).
3. Connect the negative (-) terminal of the battery to the negative input of your system.
4. Tighten all terminal bolts securely to ensure good electrical contact and prevent arcing.
5. For multi-battery systems, ensure proper series or parallel connections as required for your desired voltage and capacity. This battery supports easy 48V expansion by connecting two 24V units in series.

Image: Compatible charging options for the Redodo LiFePO4 battery.

5. Arahan Operasi

5.1 Caj Permulaan

It is recommended to fully charge the battery before its first use to ensure optimal performance and lifespan. Use a compatible LiFePO4 charger with the correct voltage dan tetapan semasa.

5.2 Kegunaan Am

The 24V 100Ah battery provides twice the energy of a 12V 100Ah lithium battery, simplifying wiring and voltage balancing. It offers stable performance, extended cycle life, and higher efficiency for various applications.

Imej: Cthamples of appliances powered by the battery and their estimated runtimes.

5.3 Peluasan Sistem

This battery allows for easy expansion. You can build a 48V battery system by connecting just two 24V batteries in series. For even greater capacity, up to 8 units can be expanded to achieve a 48V 400Ah (20.48kWh) system, ideal for electric outboard motors, RVs, solar systems, and farm equipment.

Image: Visual representation of expanding battery power up to 20.48kWh.

6. Penyelenggaraan

6.1 Sistem Pengurusan Bateri (BMS)

The Redodo LiFePO4 battery is equipped with a 100A BMS, which provides comprehensive protection to ensure enhanced safety and longevity. The BMS protects against:

• Lebihan semasa
• Caj berlebihan
• Pelepasan berlebihan
• Short-circuits
• Suhu tinggi

This robust protection contributes to the battery's impressive lifespan of 4000+ cycles and over 10 years of use.

6.2 Penjagaan Am

• Pastikan terminal bateri bersih dan bebas daripada kakisan.
• Simpan bateri di tempat yang sejuk dan kering apabila tidak digunakan untuk tempoh yang lama.
• Elakkan daripada mendedahkan bateri kepada suhu yang melampau.
• Regularly inspect the battery and connections for any signs of damage or wear.

7. Penyelesaian masalah

If you encounter issues with your Redodo LiFePO4 battery, consider the following common troubleshooting steps:

• Tiada Output Kuasa: Check all cable connections to ensure they are secure and properly tightened. Verify that the battery is adequately charged. The BMS may have activated a protection mode (e.g., over-discharge) if the voltage terlalu rendah.
• Isu Pengecasan: Ensure your charger is specifically designed for LiFePO4 batteries and matches the battery's voltage requirements. Check the charger's connections and power supply. If the battery is very cold, it may not accept a charge; allow it to warm up to an appropriate temperature.
• System Overload: If the battery suddenly stops providing power during use, the BMS may have activated over-current protection. Reduce the load on the battery and attempt to reconnect.
• Unusual Heat: If the battery feels excessively hot, immediately disconnect it from all loads and charging sources. This could indicate an internal issue or an external short circuit.

For persistent issues or complex problems, refer to the detailed troubleshooting section in the full user manual or contact Redodo customer support.

8. Waranti dan Sokongan

The Redodo 24V 100Ah LiFePO4 Lithium Battery is backed by a Waranti 5 tahun, covering defects in materials and workmanship under normal use. Additionally, Redodo provides sokongan teknikal seumur hidup untuk membantu anda dengan sebarang soalan atau masalah yang mungkin anda hadapi.

For warranty claims, technical assistance, or general inquiries, please refer to the contact information provided on your product packaging or visit the official Redodo website. Please have your product model number (24V100Ah-4Pack) and purchase details ready when contacting support.