Meja Putar Audiophile EVO 2 Debut Pro-Ject

1.1 Menyahkotak dan Komponen

Carefully unpack all items from the box. Ensure all components are present before proceeding with assembly.

• Unit Meja Putar
• Transparent Dustcover
• Kabel Sambungan
• Penyesuai Kuasa Universal
• Protraktor Penjajaran
• Penyesuai Tunggal

Depan view of the Pro-Ject Debut EVO 2 turntable.

1.2 Pemasangan Plat dan Tali Pinggang

1. Carefully place the heavy aluminum platter onto the spindle in the center of the turntable.
2. Locate the drive belt. Gently stretch the belt around the inner rim of the platter and around the motor pulley.
3. Rotate the platter manually a few times clockwise to ensure the belt is properly seated.

Image showing the platter with the drive belt correctly installed around the motor pulley.

1.3 Tonearm Assembly

1. Luncurkan pemberat balas ke bahagian belakang lengan atas.
2. Attach the pre-mounted Pick it MM EVO cartridge to the tonearm headshell.

Terperinci view of the carbon fiber tonearm and the pre-mounted Pick it MM EVO cartridge.

Diagram illustrating the TPE counterweight and premium bearing block for the tonearm.

1.4 Pemasangan Penutup Habuk

Carefully insert the hinges of the transparent dustcover into the corresponding slots on the turntable base.

The Pro-Ject Debut EVO 2 turntable with its transparent dustcover in place.

1.5 Leveling the Turntable

Place the turntable on a stable, level surface. Use a bubble level (not included) to ensure the turntable is perfectly horizontal. Adjust the turntable's feet as necessary to achieve a level position.

1.6 Mengimbangi Tonearm

This critical step ensures proper tracking force and prevents damage to your records and stylus. Follow the detailed instructions in the included manual for precise tonearm balancing and anti-skating adjustment.

Detail of the tonearm showing the anti-skating mechanism.

1.7 Menyambung ke Sistem Audio

Sambungkan meja putar kepada anda amplifier or receiver using the provided connection cable. Ensure your amplifier has a phono input, or use an external phono preamplifier if necessary. Connect the ground wire to the ground terminal on your amplebih hidup / praamp to minimize hum.

Video: Fluance Reference Turntable First Time Setup. This video provides a general guide for turntable setup, including platter, belt, tonearm, and dust cover installation, as well as leveling and balancing.

Video: How to Connect a Fluance Turntable to a Stereo Amplifier. This video offers a general guide on connecting a turntable to an amplifier, which can be helpful for the Pro-Ject Debut EVO 2.

2.1 Pemilihan Kuasa Hidup/Mati dan Kelajuan

To power on the turntable, rotate the power knob. The Debut EVO 2 features electronic speed selection for 33 and 45 RPM. Use the dedicated button to switch between these speeds. For 78 RPM records, a special stylus and pulley may be required (sold separately).

2.2 Memainkan Rakaman

1. Letakkan rekod anda di pinggan.
2. Pilih kelajuan main balik yang betul (33 atau 45 RPM).
3. Angkat lengan atas perlahan-lahan menggunakan tuil isyarat.
4. Letakkan lengan nada di atas trek yang dikehendaki pada rekod.
5. Slowly lower the cueing lever to allow the stylus to descend onto the record groove.
6. At the end of the record, lift the tonearm using the cueing lever and return it to its rest.

3.1 Pembersihan

• Regularly clean the dustcover and turntable plinth with a soft, dry cloth.
• Use a carbon fiber brush to gently clean your records before each play to remove dust and static.
• Clean the stylus carefully with a dedicated stylus brush, moving from back to front.

3.2 Penjagaan Stilus

The stylus is a delicate component. Avoid touching it with your fingers. Replace the stylus when signs of wear appear, typically after 500-1000 hours of playback, to maintain sound quality and prevent record damage.

4.1 Tiada Bunyi

• Check all cable connections between the turntable, preamplifier (if used), and amppenguat/penerima.
• Ensure the correct input is selected on your amppenguat/penerima.
• Verify the stylus is properly seated in the cartridge and the tonearm is balanced.

4.2 Melangkau atau Menyeleweng

• Pastikan meja putar berada di atas permukaan yang stabil dan rata.
• Re-check tonearm balance and anti-skating settings.
• Clean the record and stylus.
• Inspect the stylus for damage or wear.

4.3 Humming Noise

• Ensure the ground wire is securely connected between the turntable and your amplebih hidup / praamp.
• Check for any loose connections in the audio cables.
• Move the turntable away from other electronic devices that might cause interference.

6.1 Ketersediaan Alat Ganti

Pro-Ject offers a 25-year spare parts availability guarantee for this turntable, ensuring its longevity and continued performance.

6.2 Sokongan Pelanggan

For further assistance, technical support, or warranty claims, please refer to the contact information provided in your product packaging or visit the official Pro-Ject Audio Systems webtapak.