1. Maklumat Keselamatan
Please read these safety instructions carefully before using the Speedlink EXCELLO NX RGB Headset Stand. Keep this manual for future reference.
- Jangan dedahkan peranti kepada kelembapan, suhu melampau atau cahaya matahari langsung.
- Jangan cuba membuka atau mengubah suai peranti. Ini boleh membatalkan jaminan dan menyebabkan kerosakan.
- Use only with compatible USB power sources.
- Jauhkan daripada kanak-kanak.
- Bersihkan peranti dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut yang melelas.
2. Kandungan Pakej
Pastikan semua item ada dalam pakej:
- Speedlink EXCELLO NX RGB Headset Stand
- Integrated USB-A Connection Cable (1.2m)
3. Produk Lebihview
The Speedlink EXCELLO NX is a multifunctional RGB headset stand designed to keep your gaming headset organized while providing additional connectivity options. It features dynamic RGB lighting and an integrated USB hub.
Rajah 3.1: Depan view of the EXCELLO NX RGB Headset Stand, showcasing its design and illuminated base.
Ciri-ciri Utama:
- Pencahayaan RGB: 9 different lighting modes, controllable via a touch sensor.
- Hab USB Bersepadu: Includes 1x USB-C port and 2x USB-A ports for connecting additional devices.
- Reka Bentuk Penjimatan Ruang: Keeps your headset organized and desk clutter-free.
- Pangkalan Stabil: Non-slip underside ensures secure placement on surfaces.
Figure 3.2: Detail of the integrated USB hub, showing one USB-C and two USB-A ports.
4. Arahan Persediaan
Follow these steps to set up your EXCELLO NX RGB Headset Stand:
- Buka Pendirian: Carefully remove the headset stand from its packaging.
- Letakkan Pendirian: Place the stand on a stable, flat surface on your desk. Ensure the non-slip base is fully in contact with the surface.
- Sambungkan ke Kuasa/Data: Plug the integrated USB-A cable from the headset stand into an available USB-A port on your computer or a compatible USB power adapter. The stand will power on, and the RGB lighting will activate.
- Place Headset: Hang your gaming headset on the designated holder at the top of the stand.
Rajah 4.1: Pro sampinganfile of the headset stand, illustrating its stable design for holding a headset.
5. Arahan Operasi
5.1. Kawalan Pencahayaan RGB
The EXCELLO NX features a touch sensor for controlling its RGB lighting modes. The touch sensor is located on the base of the stand.
- Sentuhan Tunggal: Tap the touch sensor to cycle through the 9 available RGB lighting modes.
- Tekan lama: Press and hold the touch sensor for approximately 3 seconds to turn the RGB lighting off. Repeat the long press to turn it back on to the last selected mode or default.
Rajah 5.1: Bersudut view showing the illuminated light strip and the base where the touch sensor is located.
5.2. Penggunaan Hab USB
The integrated USB hub allows you to connect additional devices directly to the headset stand.
- Port USB-C: Use this port to connect devices that require a USB-C connection for charging or data transfer.
- Port USB-A (x2): Use these two ports to connect standard USB-A devices such as mice, keyboards, USB drives, or for charging other peripherals.
Note: The USB hub operates at USB 2.0 speeds. Ensure your computer's USB port provides sufficient power for all connected devices.
6. Penyelenggaraan
To ensure the longevity of your EXCELLO NX RGB Headset Stand, follow these simple maintenance guidelines:
- Pembersihan: Wipe the stand with a soft, dry, lint-free cloth. Do not use liquid cleaners, sprays, or abrasive materials.
- Storan: Apabila tidak digunakan untuk tempoh yang lama, simpan pendirian di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung.
- Penjagaan Kabel: Avoid bending or crimping the integrated USB cable excessively.
7. Penyelesaian masalah
If you encounter issues with your EXCELLO NX RGB Headset Stand, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu RGB tidak menyala. | Tiada kuasa atau sambungan longgar. | Ensure the USB-A cable is securely connected to a powered USB port on your computer or adapter. Try a different USB port. |
| USB hub devices are not recognized. | Insufficient power or driver issue. | Connect the stand to a USB port that provides sufficient power. Try connecting devices directly to your computer to rule out driver issues. Disconnect and reconnect the device. |
| RGB lighting is stuck on one mode or unresponsive. | Temporary software glitch or sensor issue. | Disconnect the stand from its power source for a few seconds, then reconnect it. Ensure the touch sensor area is clean and unobstructed. |
If the problem persists, please contact Speedlink customer support.
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | SL-800911-BK |
| Dimensi (L×W×H) | 150 x 113 x 275 mm (5.91 x 4.45 x 10.83 inci) |
| Berat badan | 226 g (8 auns) |
| Port USB | 1x USB-C, 2x USB-A (USB 2.0) |
| Sambungan ke Komputer | USB-A (integrated cable) |
| Panjang Kabel | 1.2 m |
| Pencahayaan | RGB with 9 modes, touch sensor control |
| warna | Hitam |
9. Waranti dan Sokongan
Speedlink products are manufactured to high quality standards. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Speedlink webtapak.
For technical support or customer service inquiries, please visit the Speedlink support page or contact their customer service department directly. Contact information can typically be found on the Speedlink webtapak: www.speedlink.com