Manual Arahan Basikal Elektrik Aipas C2

1. Produk Lebihview

The Aipas C2 Electric Bike is designed for adults, featuring a powerful 1100W peak motor and a 48V 11AH battery, offering a top speed of 28MPH and a range of up to 68 miles. It is equipped with a robust suspension system and dual 180mm disc brakes for a smooth and safe riding experience across various terrains. The bike also includes a convenient M5 display with a USB charging port.

2. Persediaan dan Pemasangan

Your Aipas C2 Electric Bike comes 85% pre-assembled. Follow these steps to complete the assembly and prepare your bike for its first ride.

2.1 Membuka Kotak dan Pemeriksaan Awal

Carefully open the packaging. The box is secured with metal staples; pull firmly on one side to open. Remove all packing materials and protective foam. Inspect all components for any signs of damage during transit.

For a visual guide on unboxing, please refer to the official unboxing video:

2.2 Handlebar and Front Wheel Installation

1. Carefully remove the front wheel from the packaging.
2. Loosen the stem and riser screws on the bike's head tube.
3. Turn the riser forward and center it, then tighten all three bolts securely.
4. Remove all bolts from the handlebar clamp.
5. Attach the handlebar to the stem and reinstall the clamp screws, ensuring they are tightened evenly.
6. Remove the fender bolt, nut, and washer from the front fork.
7. Install the front fender and headlight by passing the bolt through the headlight, fender, and mounting bar. Center the headlight and adjust the fender height while tightening the nut and bolt.
8. Remove the silver front fender screws and attach the fender arms on both sides.
9. Carefully align the front wheel rotor between the caliper pads. Ensure the disc is in line with the brake caliper pads.
10. Reinstall spacers with the locking pin facing the correct direction and tighten the axle nuts.

2.3 Pemasangan Paparan

1. First, remove the two screws and nuts from the display mount to prevent losing them.
2. Install the display on the handlebar, ensuring it is centered properly.
3. Insert the nuts, then tighten with the screws to secure the display.

2.4 Pemasangan Pedal

1. Identify each pedal by the sticker or marking on the pedal axle (R for Right, L for Left).
2. Install the right pedal by turning clockwise into the crank arm.
3. Install the left pedal by turning counter-clockwise into the crank arm.
4. Ensure both pedals are securely tightened.

2.5 Steering Adjustment and Final Checks

1. Loosen the stem screw and align the handlebars and front wheel together so they are perpendicular with the frame.
2. Tighten the stem screw securely.
3. Check again that all screws, especially on the rear rack and fenders, are tightened properly.

For a comprehensive visual guide on assembly, please watch the installation video:

3. Operating Your Aipas C2 Electric Bike

3.1 Powering On and Display Functions

To power on the bike, press and hold the power button on the M5 display. The display will show your current speed, battery level, PAS level, and odometer. The M5 display is equipped with a USB port, allowing you to charge your phone or other devices while riding.

3.2 Sistem Bantuan Pedal (PAS)

The Aipas C2 features 5 levels of Pedal Assist. You can adjust the PAS level using the controls on the handlebar to suit your riding preference and terrain. Higher PAS levels provide more motor assistance.

3.3 Operasi Pendikit

The bike is equipped with a throttle for instant power. Gently twist the throttle to engage the motor without pedaling. Use the throttle responsibly and be aware of your surroundings.

3.4 Sistem Pencahayaan

The front headlight provides clear visibility during low-light conditions. The taillight flashes when braking, enhancing your safety on the road. Operate the lights using the dedicated buttons on the handlebar.

4. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your Aipas C2 Electric Bike.

4.1 Penjagaan Bateri

• The 48V 499WH battery is removable for convenient charging.
• Charge the battery for 4-6 hours for a full charge.
• The battery has an IPX6 waterproof rating, but avoid submerging it in water.
• Simpan bateri di tempat yang sejuk dan kering apabila tidak digunakan.
• To remove the battery, insert the key into the lock, turn it, and press the safety button while pulling the battery out.
• To reinstall, slide the battery back into the frame until it clicks securely into place, then lock it with the key.

4.2 Sistem Brek

The C2 is equipped with dual 180mm Zoom disc brakes. Regularly check brake pads for wear and ensure proper alignment of the disc with the caliper pads. Adjust brake tension as needed for optimal stopping power.

4.3 Tayar

The 26"x 2.0" fat tires provide excellent grip and shock absorption. Maintain recommended tire pressure for best performance and to prevent punctures. Regularly inspect tires for cuts or excessive wear.

4.4 Penjagaan Am

• Keep the bike clean, especially after riding in wet or muddy conditions.
• Lubricate the chain regularly to ensure smooth gear changes and prevent rust.
• Periksa secara berkala semua bolt dan pengikat untuk memastikan ia ketat.

5. Penyelesaian masalah

This section provides solutions to common issues you might encounter with your Aipas C2 Electric Bike. For more complex problems, please contact customer support.

6. Spesifikasi Produk

7. Waranti dan Sokongan

7.1 Maklumat Waranti

Aipas provides a 1-year quality-issue warranty for the C2 Electric Bike. This warranty covers manufacturing defects and quality-related issues. Please retain your proof of purchase for warranty claims.

7.2 Sokongan Pelanggan

For technical guidance, troubleshooting assistance, or any inquiries regarding your Aipas C2 Electric Bike, please contact our customer support team:

• Pusat Panggilan: 1(833)532-5966 (Mon-Fri: 9:00 AM - 5:30 PM PST)
• Sokongan E-mel: service@aipasbike.com (Responses within 24 hours)

You can also refer to the FAQ section on the product page for common questions, such as assembly instructions.