Mars Gaming ML-LCD360 AIO Liquid Cooler Instruction Manual

1. Pengenalan

Thank you for choosing the Mars Gaming ML-LCD360 AIO Liquid Cooler. This all-in-one liquid cooling system is designed to provide efficient thermal management for your CPU, featuring a 600W TDP, three 120mm FDB ARGB fans, and an integrated LCD display for real-time temperature monitoring. This manual provides essential information for proper installation, operation, and maintenance of your cooler.

2. Kandungan Pakej

Please verify that all components are present before proceeding with installation. If any items are missing or damaged, please contact Mars Gaming support.

• 1x Mars Gaming ML-LCD360 AIO Liquid Cooler (Radiator, Pump/Cold Plate, Tubes)
• 3x 120mm FDB ARGB Fans
• Mounting Hardware Kit for Intel (LGA 2066/2011/1700/1200/1156/1155/1151/1150)
• Mounting Hardware Kit for AMD (AM5/AM4/AM3+/AM3/AM2+/AM2/FM2/FM1)
• Skru Kipas dan Skru Radiator
• Thermal Paste (may be pre-applied or included in a tube)
• ARGB Controller/Cables (5V 3-pin ARGB connector)
• Manual Pengguna

3. Spesifikasi

4. Persediaan dan Pemasangan

Before installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU socket and header locations. Always handle components with care to prevent damage.

4.1 Sediakan Soket CPU

1. Kenal pasti jenis soket CPU anda (Intel atau AMD).
2. Pasang plat belakang yang sesuai (jika diperlukan untuk soket anda) di belakang papan induk.
3. Secure the correct standoffs onto the backplate or directly into the motherboard mounting holes.

4.2 Sapukan Pes Terma

If the thermal paste is not pre-applied to the cold plate, apply a small pea-sized amount to the center of your CPU's integrated heat spreader (IHS). Do not spread it manually; the pressure from the cold plate will distribute it evenly.

4.3 Mount Pump/Cold Plate

1. Carefully align the pump/cold plate assembly with the standoffs on the motherboard.
2. Place the mounting bracket over the pump and secure it with the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.

Image: The pump head of the Mars Gaming ML-LCD360 AIO Liquid Cooler, featuring the integrated LCD display for temperature monitoring and the 3rd Gen Opti-Chamber design.

4.4 Pasang Radiator dan Kipas

1. Attach the three 120mm ARGB fans to the radiator using the shorter fan screws. Ensure the fan airflow direction is appropriate for your case (typically pushing air through the radiator or pulling air from it).
2. Mount the radiator assembly to an available fan mount location in your PC case (e.g., top, front, or rear) using the longer radiator screws.

Image: The Mars Gaming ML-LCD360 AIO Liquid Cooler fully assembled with its three 120mm ARGB fans attached to the radiator, showcasing its 600W TDP capability.

4.5 Sambungkan Kabel

1. Connect the pump's 4-pin power cable to a dedicated AIO_PUMP or CPU_FAN header on your motherboard. Consult your motherboard manual for the correct header.
2. Connect each fan's 4-pin PWM power cable to available fan headers on your motherboard or a fan hub.
3. Connect the 5V 3-pin ARGB cables from the pump and fans to a compatible 5V ARGB header on your motherboard or an external ARGB controller. Ensure correct polarity to avoid damage.

Image: The Mars Gaming ML-LCD360 AIO Liquid Cooler installed inside a desktop computer case, with the ARGB lighting active and the LCD display showing a temperature reading.

5. Arahan Operasi

5.1 Hidupkan Kuasa Awal

After completing all connections, power on your system. The fans and pump should start operating, and the ARGB lighting should illuminate. The LCD display on the pump will show the coolant temperature.

5.2 Pemantauan Suhu

The integrated ARGB LCD display on the pump provides real-time monitoring of the coolant temperature. This allows you to quickly assess the cooling performance of your system.

5.3 Kawalan Pencahayaan ARGB

The ML-LCD360 supports customizable ARGB lighting. Connect the 5V 3-pin ARGB cable to a compatible motherboard header (Asus Aura Sync, Mystic Light Sync, RGB Fusion) to control the lighting effects via your motherboard's software. Alternatively, if an external ARGB controller is included or purchased separately, use its controls to adjust the lighting.

Imej: Dari dekat view of the Mars Gaming ML-LCD360 AIO Liquid Cooler's three 120mm FDB ARGB fans, showcasing their vibrant illumination and the pump head with its LCD display.

6. Penyelenggaraan

Penyelenggaraan berkala membantu memastikan prestasi optimum dan jangka hayat penyejuk cecair anda.

• Pembersihan Habuk: Periodically clean the radiator fins and fan blades with compressed air or a soft brush to remove dust buildup. Dust can impede airflow and reduce cooling efficiency.
• Pemeriksaan Visual: Occasionally inspect the tubes and connections for any signs of leaks or damage. While the system is sealed, a quick visual check can help identify potential issues early.
• Liquid Loop: The liquid loop is a closed system and does not require refilling or maintenance by the user. Do not attempt to open the pump or radiator.

Imej: A terperinci view of the extra-long Teflon tubes used in the Mars Gaming ML-LCD360 AIO Liquid Cooler, designed for durability and flexible installation.

7. Penyelesaian masalah

If you encounter issues with your Mars Gaming ML-LCD360 AIO Liquid Cooler, refer to the following common problems and solutions.

7.1 Suhu CPU Tinggi

• Semak Pemasangan: Ensure the pump/cold plate is securely mounted to the CPU and making good contact. Re-seat if necessary.
• Tampal Terma: Sahkan bahawa pes haba telah digunakan dengan betul dan sekata.
• Operasi Kipas: Confirm that all three fans are spinning. Check fan connections to the motherboard or fan hub.
• Aliran Udara Radiator: Ensure the radiator is not obstructed by dust or cables, and that case airflow is adequate.
• Operasi pam: Listen for the pump operating. If it's silent and temperatures are high, the pump may not be functioning. Check its power connection.

7.2 Fans or ARGB Lighting Not Working

• Sambungan Kuasa: Double-check all 4-pin fan power cables and the 5V 3-pin ARGB cables are securely connected to the correct headers on the motherboard or controller.
• Perisian Papan Induk: For ARGB control, ensure your motherboard's lighting software (e.g., Asus Aura Sync, Mystic Light Sync, RGB Fusion) is installed and configured correctly.
• Pengepala ARGB: Confirm you are using a 5V 3-pin ARGB header, not a 12V 4-pin RGB header, as this can damage the ARGB components.

7.3 Inaccurate LCD Temperature Display

The LCD display shows the coolant temperature. This reading may differ from CPU core temperatures reported by software, as it measures the liquid temperature within the loop. If the display appears to be malfunctioning (e.g., showing incorrect values, flickering, or turning off), ensure all display-related cables are properly connected. If the issue persists, contact customer support.

8. Waranti dan Sokongan

The Mars Gaming ML-LCD360 AIO Liquid Cooler comes with a Waranti pengilang 3 tahun dari tarikh pembelian. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan biasa.

For technical support, warranty claims, or any questions regarding your product, please contact Mars Gaming customer service through their official website or the retailer where you purchased the product. Please have your proof of purchase and product model number (MLLCD360) ready when contacting support.