pengenalan
These Ravinte European-style concealed cabinet hinges are designed for full overlay doors on frameless cabinets. They feature a soft-close mechanism for quiet operation and adjustable settings for precise door alignment. This manual provides detailed instructions for installation, adjustment, and general care.
Nota: These hinges are suitable for frameless cabinets where the cabinet door covers the cabinet opening almost completely, leaving approximately 1/4 inch of space between doors or drawers. They are not designed for face frame cabinets.
Persediaan dan Pemasangan
Before installation, ensure your cabinet doors meet the specified dimensions for these hinges. The hinge cup diameter is 35mm, with a depth of 11.5mm. The recommended door thickness range is 14-22mm. The screw hole distance on the door is 45mm.
Imej 1: Hinge Dimensions. This diagram illustrates the key measurements of the hinge, including cup diameter, cup depth, and overall length and width.
Imej 2: Frameless Cabinet Compatibility and Cup Depth. This image demonstrates how the hinge fits a frameless cabinet and highlights the required cup depth of 11.5mm.
Langkah Pemasangan:
- Sediakan Pintu: If not already present, drill a 35mm diameter cup hole to a depth of 11.5mm on the cabinet door. Align the hinge with the drilled hole and parallel to the vertical door edge.
- Install Mounting Plate to Cabinet: Mark the two screw holes for the mounting plate on the cabinet using a pencil. Use a 3/32 inch drill bit to create pilot holes. Secure the mounting plate to the cabinet. The cabinet mounting plate can be easily detached from the hinge arm, allowing for separate installation.
- Pasang Engsel pada Pintu: Insert the hinge into the drilled cup hole on the door and secure it with screws.
- Sambungkan Pintu ke Kabinet: Connect the hinge arm to the mounting plate on the cabinet. Press the hinge arm down until it snaps securely onto the plate.
Imej 3: Installation Process. This diagram visually guides through the steps of installing the hinge cup, mounting plate, and connecting the door.
Pengendalian dan Pelarasan
These hinges offer quick adjustment capabilities to ensure perfect door alignment. You can shift the door up or down, forward or backward, or left or right by tightening or loosening specific screws on the hinge.
Imej 4: Hinge Adjustment Points. This image highlights the screws used for overlay, depth, and height adjustments, each offering an approximate 8mm range.
- Pelarasan Tindanan: Rotate the lateral screw to increase or decrease the door overlay.
- Pelarasan Kedalaman: Rotate the depth screw to adjust the door gap.
- Pelarasan Ketinggian: Adjust the mounting plate on the panel to shift the door up or down.
The integrated piston damper and strong spring ensure a smooth and silent soft-close action, preventing cabinet doors from slamming.
Imej 5: Soft-Close Mechanism. A detailed view of the piston damper, responsible for the smooth and silent closing of the cabinet door.
Penyelenggaraan
To ensure the longevity and optimal performance of your Ravinte cabinet hinges, follow these simple maintenance guidelines:
- Pembersihan: Lap engsel secara berkala dengan lembut, damp cloth to remove dust and grime. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
- Pelinciran: The soft-close mechanism is designed for maintenance-free operation. However, if you notice any stiffness over time, a small amount of silicone-based lubricant can be applied to the moving parts. Avoid oil-based lubricants, which can attract dust.
- Pemeriksaan: Regularly check all screws for tightness. Loose screws can lead to door misalignment or hinge failure. Re-tighten as necessary.
Menyelesaikan masalah
If you encounter issues with your Ravinte cabinet hinges, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Door does not close softly or slams. | Soft-close mechanism is not engaging properly or is damaged. | Ensure the hinge is correctly installed and all screws are tight. Inspect the piston damper for any obstructions or damage. If damaged, replace the hinge. |
| Door is misaligned (gaps, crooked). | Adjustment screws are loose or incorrectly set. | Refer to the "Operating and Adjustment" section to adjust the overlay, depth, and height screws until the door is properly aligned. |
| Hinge feels stiff or squeaks. | Accumulation of dust or lack of lubrication. | Clean the hinge thoroughly. Apply a small amount of silicone-based lubricant to the moving parts if necessary. |
| Hinge detaches from mounting plate. | Hinge not fully snapped onto the mounting plate. | Ensure the hinge arm is pressed firmly onto the mounting plate until it clicks securely into place. |
Spesifikasi
- Jenama: Ravinte
- Nombor Model: 39840076169302
- Bahan: logam
- Jenis Selesai: Satin Nickel
- Jenis Pemasangan: Pemasangan Pintu
- Kiraan Lubang: 8
- Bilangan Unit: 4.0 Count (per pack)
- warna: Satin Nickel
- Bilangan Item: 4 (hinges)
- Opening Degree: 105 darjah
- Hinge Cup Diameter: 35mm
- Hinge Cup Depth: 11.5mm
- Screw Holes Distance (on door): 45mm
- Ketebalan Pintu yang Disyorkan: 14-22mm
Maklumat Waranti
Ravinte products are manufactured to high-quality standards. For specific warranty details, please refer to the product packaging or contact Ravinte customer support. Generally, products are covered against manufacturing defects for a reasonable period from the date of purchase.
Sokongan Pelanggan
If you have any questions, require assistance with installation, or need to report a defective product, please contact Ravinte customer support through the retailer where the product was purchased or visit the official Ravinte webtapak untuk maklumat hubungan.