Maklumat Keselamatan Penting
Please read all instructions carefully before assembly and use of this bunk bed. Keep this manual for future reference.
- Kapasiti Berat Maksimum: Do not exceed the recommended weight limits for each bunk. Refer to specifications for details.
- Top Bunk Safety: The top bunk is not suitable for children under 6 years of age. Ensure children understand proper use of the ladder.
- Bahaya Kejatuhan: Always use the guardrails on the top bunk. Do not allow jumping on the bed.
- Saiz tilam: Use only mattresses of the specified size to prevent gaps that could trap a child.
- Pemeriksaan Berkala: Periodically check all connections and hardware to ensure they are tight and secure.
- Pengudaraan: Pastikan pengudaraan yang mencukupi di sekeliling katil.
Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan. Jika mana-mana bahagian yang hilang atau rosak, hubungi sokongan pelanggan.
- Komponen Rangka Katil Dua Tingkat (Katil Kepala, Papan Kaki, Rel Sisi)
- Tangga
- Bed Slats (for both upper and lower bunks)
- Pek Perkakasan (skru, bolt, pencuci, sepana Allen)
- Manual Arahan
Arahan Persediaan dan Pemasangan
Assembly typically requires two adults. Clear a spacious area for assembly. Do not fully tighten bolts until all components are loosely assembled.
Langkah 1: Buka Pembungkusan dan Kenalpasti Bahagian
Carefully remove all components from the packaging. Lay them out on a soft, clean surface to prevent scratches. Refer to the parts list in your hardware pack to identify each piece.
Image: All components of the white metal bunk bed frame laid out before assembly.
Langkah 2: Pasang Kerangka Utama
Begin by connecting the headboards and footboards to the side rails for both the upper and lower bunks. Use the provided bolts and an Allen wrench. Ensure all connections are aligned correctly before partially tightening.
Image: Partially assembled white metal bunk bed frame showing the lower and upper bunk structures.
Langkah 3: Pasang Bilah Katil
Place the metal slats onto the designated supports for both the upper and lower bunks. Secure them using the provided hardware. Ensure slats are evenly spaced and firmly attached to provide adequate mattress support.
Imej: Jarak dekat view of the metal slat system installed on the bunk bed frame.
Step 4: Attach the Ladder and Finalize
Attach the built-in ladder to the side of the bunk bed frame using the specified hardware. Once all components are in place, go back and fully tighten all bolts and screws. Do not overtighten.
Image: Fully assembled white metal twin over twin house bunk bed with built-in ladder.
Arahan Operasi
Proper use ensures safety and longevity of your bunk bed.
- Penggunaan Tangga: Always use the built-in ladder for accessing the top bunk. Face the ladder when climbing up or down.
- Top Bunk Occupancy: Only one person should occupy the top bunk at a time.
- Tiada Permainan Kuda: Prohibit jumping, rough play, or hanging from any part of the bunk bed.
- Pencahayaan: Ensure adequate lighting near the ladder for safe nighttime use.
Penyelenggaraan
Penyelenggaraan berkala membantu memelihara keadaan dan keselamatan katil dua tingkat anda.
- Pembersihan: Lap ke bawah bingkai logam dengan lembut, damp kain. Elakkan pembersih yang melelas atau bahan kimia keras yang boleh merosakkan kemasan.
- Pemeriksaan perkakasan: Every 3-6 months, inspect all bolts, screws, and connections. Tighten any loose hardware to maintain structural integrity.
- Squeak Prevention: This bed is designed to be squeak resistant. If any squeaking occurs, re-tighten all hardware. Applying a small amount of silicone lubricant to metal-on-metal contact points can also help.
- Faktor Persekitaran: Avoid placing the bed in direct sunlight or near heat sources to prevent material degradation.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Katil terasa goyah atau tidak stabil | Sambungan perkakasan longgar. | Periksa dan ketatkan semua bolt dan skru. Pastikan katil berada pada permukaan yang rata. |
| Bunyi-bunyi berdecit | Loose connections or metal-on-metal friction. | Re-tighten all assembly hardware. Apply a small amount of silicone lubricant to contact points if necessary. |
| Ladder feels loose | Ladder attachment hardware is not secure. | Ensure the ladder is correctly installed and all connecting bolts are fully tightened. |
Spesifikasi
- Jenis Produk: Twin Over Twin House Bunk Bed
- Jenama: Generik
- Nombor Model: bed-frames
- warna: putih
- Bahan: logam
- Dimensi Produk (L x W x H): 76.5" x 40.5" x 71"
- Perhimpunan Diperlukan: ya
- Ciri Khas: Fade Resistant, Squeak Resistant
- Komponen yang Disertakan: Bilah
- Pengeluar: AnhuaUSA
Waranti dan Sokongan
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact the seller directly. Keep your purchase receipt for proof of purchase.
