TURNMEON GJ-24WPG32-US1-1

TURNMEON Halloween Witches Legs Candy Bowl with Orange Lights and Timer

Model: GJ-24WPG32-US1-1

pengenalan

Thank you for choosing the TURNMEON Halloween Witches Legs Candy Bowl. This product is designed to enhance your Halloween decorations with its unique witches' legs design, integrated orange LED lights, and a convenient timer function. This manual provides detailed instructions for assembly, operation, and care to ensure safe and enjoyable use.

Maklumat Keselamatan

Please read and follow these safety guidelines carefully before using the product:

  • Use according to general electrical safety guidelines.
  • Jauhkan daripada air dan bahan mudah terbakar.
  • Jangan membebankan saluran keluar elektrik.
  • Securely fasten in windy conditions if used outdoors.
  • Do not allow children to play with the display.

Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum pemasangan:

  • 1x Cauldron with "Happy Halloween" text
  • 2x Plastic Witches Leg Tubes (multi-segment)
  • 2x Wooden Witch Feet
  • 1x String of 30 Orange LED Lights (pre-installed or separate)
  • 1x Kotak Bateri (memerlukan 2 bateri AA, tidak termasuk)

Persediaan dan Perhimpunan

Follow these steps to assemble your Halloween Witches Legs Candy Bowl:

  1. Pasang Bateri: Open the battery compartment on the underside of the cauldron. Insert 2 AA batteries (not included), ensuring correct polarity. Close the compartment securely.
    Hands installing AA batteries into the battery box located on the underside of the cauldron.

    Image: Installing batteries into the cauldron's battery box.

  2. Assemble Leg Tubes: Connect the plastic segments of each witches leg tube one by one until they form two complete legs.
  3. Set Up String Lights: If not pre-installed, carefully thread the 30 orange LED string lights into the assembled leg tubes. Ensure the lights are evenly distributed within the tubes.
  4. Connect Tubes to Cauldron: Insert the top end of each assembled leg tube into the designated holes on the underside of the cauldron. Push firmly until secure.
  5. Connect Tubes to Feet: Insert the bottom end of each assembled leg tube into the holes on the wooden witch feet. Ensure the feet are stable and facing forward.
    Diagram showing five steps of assembling the witches legs candy bowl: connecting leg segments, inserting string lights, attaching legs to cauldron, attaching legs to feet, and the final assembled product.

    Image: Detailed assembly steps for the witches legs candy bowl.

Your Witches Legs Candy Bowl is now assembled and ready for use. You can fill the cauldron with candy or other decorative items.

The assembled TURNMEON Halloween Witches Legs Candy Bowl with orange lights illuminated, filled with candy, placed in a festive Halloween setting.

Image: The assembled Witches Legs Candy Bowl with lights on, ready for display.

Arahan Operasi

The orange LED lights are controlled by a switch located on the battery box. This switch has three positions: ON, OFF, and TIMER.

  • ON: Slide the switch to the "ON" position to keep the lights continuously illuminated.
  • MATI: Slide the switch to the "OFF" position to turn off the lights.
  • PEMASA: Slide the switch to the "TIMER" position to activate the automatic timer function.
Diagram illustrating the ON, OFF, and TIMER switch positions on the battery box, with explanations of each function.

Image: Battery box switch settings for ON, OFF, and TIMER functions.

Fungsi Pemasa

When the switch is set to the "TIMER" position, the lights will operate on a 24-hour cycle:

  • The lights will stay on for 6 hours.
  • After 6 hours, the lights will automatically turn off for 18 hours.
  • This 6-hour on, 18-hour off cycle will repeat daily until the switch is changed or batteries are depleted.

To reset the timer, simply switch the unit to OFF and then back to TIMER at your desired start time.

Penyelenggaraan

To ensure the longevity of your Halloween Witches Legs Candy Bowl:

  • Clean the product with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Simpan di tempat yang sejuk dan kering apabila tidak digunakan.
  • Tanggalkan bateri jika produk tidak akan digunakan untuk tempoh yang lama untuk mengelakkan kebocoran.

Menyelesaikan masalah

If the lights do not turn on:

  • Periksa sama ada bateri dimasukkan dengan betul dengan polariti yang betul.
  • Gantikan bateri lama dengan yang baru.
  • Ensure the switch is set to either "ON" or "TIMER" position.
  • Verify that the string lights are properly connected within the leg tubes.

Spesifikasi

CiriPerincian
Nombor ModelGJ-24WPG32-US1-1
Dimensi (Anggaran)2 Ft (24 inches) tall (stretched leg design), Cauldron diameter 7.7 inches
Diagram showing the dimensions of the witches legs candy bowl, including cauldron diameter and leg height options (24 inches and 16.5 inches).

Imej: Gambarajah dimensi produk.

Berat badan1.96 paun
bahanPlastic (legs, cauldron), Wood (feet)
Jenis CahayaLampu String LED
Bilangan LED30
Warna CerahJingga
Sumber Kuasa2 Bateri AA (tidak termasuk)
Voltage3 Volt
Fungsi Pemasa6 hours ON / 18 hours OFF cycle

Video Produk

Watch this video for a visual guide on the assembly and features of the TURNMEON Halloween Witches Legs Candy Bowl.

Video: Assembly and features of the TURNMEON Halloween Witches Legs Candy Bowl.

Waranti dan Sokongan

For warranty information or technical support, please refer to the product packaging or contact the retailer where the product was purchased. Keep your purchase receipt for proof of purchase.

Dokumen Berkaitan - GJ-24WPG32-US1-1

Praview PCT Automotive MZ4506 Arahan Pemasangan Towbar untuk Mazda 6 (GJ)
Arahan pemasangan terperinci untuk towbar PCT Automotive MZ4506, direka untuk model Mazda 6 (GJ) Saloon & Estate/Tourer dari 2013 dan seterusnya. Termasuk senarai komponen, prosedur pemasangan langkah demi langkah, tetapan tork, maklumat jaminan dan nasihat penyelenggaraan.
Praview Towel Warmer User's Manual - Operation, Maintenance, and Specifications
Comprehensive user's manual for ADVWIN Towel Warmers, covering safe operation, essential maintenance, and detailed technical specifications for models GJ-16A, GJ-32A, GJ-48A, RTD-23A, NV-216, NV-218, and NV-218B.
Praview Sloan Dolphin 186-1.0-GJ-CP Manual Urinal Flushometer Specifications
Detailed specifications for the Sloan Dolphin 186-1.0-GJ-CP manual urinal flushometer, featuring 1.0 gpf, polished chrome finish, top spud connection, and compliance with IAPMO and UPC standards.
Praview Sloan DOLPHIN 115-1.6-GJ-CP Manual Flushometer - Product Specifications
Detailed specifications, features, and compliance information for the Sloan DOLPHIN 115-1.6-GJ-CP manual flushometer, a 1.6 gpf water closet flushometer with a polished chrome finish and ground joint control stop.
Praview Panduan Penyelesaian Panasonic TOUGHBOOK 40 mk1
Panduan penyelesaian komprehensif yang memperincikan ciri, spesifikasi dan ekosistem aksesori yang meluas untuk komputer riba lasak Panasonic TOUGHBOOK 40 mk1, direka untuk aplikasi perusahaan dan lapangan yang menuntut.
Praview ジャイアント自転車取扱説明書
この取扱説明書は、新しいジャイアント自転車を安全に操作し、メンテナンスを行い、楽しむための必須情報を提供します。安全確認、適切な調整、コンポーネントの詳細について学びましょう。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.