Fydun Fydunrkt1qmx8oz

Fydun M5 LCD Display 48V 5 Pin Electric Meter User Manual

Model: Fydunrkt1qmx8oz

1. Pengenalan

This manual provides essential information for the installation, operation, and maintenance of your Fydun M5 LCD Display. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.

The Fydun M5 LCD Display is a versatile electric meter designed for electric bikes and scooters. It features a clear display for essential riding data and is built for durability and ease of use.

2. Produk Lebihview

The M5 LCD Display offers a clear interface for monitoring your electric vehicle's performance. Key features include:

  • Reka bentuk kalis air: The display is designed to withstand various weather conditions, ensuring reliable operation even in rain.
  • Pembinaan Tahan Lama: Built with premium ABS material and sturdy wiring, it ensures a low failure rate and long-term performance.
  • Pemasangan Mudah: Compatible with 31.8mm and 22.2mm mounting apertures, facilitating straightforward installation on most electric bikes and scooters.
  • Bahagian Gantian: An ideal component for replacing old or damaged displays, restoring full functionality and enhancing the vehicle's appearance.
Fydun M5 LCD Display front view

Imej: Depan view of the Fydun M5 LCD Display with its control unit and connector cable.

Fydun M5 LCD Display features: Good Replacement, Waterproof Design

Image: Visual representation highlighting the display's waterproof design and suitability as a replacement part.

3. Spesifikasi

CiriPerincian
Nombor ModelFydunrkt1qmx8oz
Voltage Keserasian24V, 36V, 48V, 60V Universal
Konfigurasi Pin5 Pin Electric Meter
Apertur Pemasangan31.8mm (pilihan 22.2mm)
bahanPremium ABS
Jenis PaparanLCD
Fydun M5 LCD Display dimensions and 5-pin connector diagram

Image: Diagram showing the dimensions of the M5 LCD Display and the pinout for the 5-pin connector.

4. Apa yang ada di dalam Kotak

Selepas membuka pakej, anda harus mencari item berikut:

  • 1 x Electric LCD Meter (Fydun M5 LCD Display)
  • 1 x Manual Arahan (dokumen ini)
  • 1 x Kabel Sambungan

5. Persediaan dan Pemasangan

Follow these steps to properly install your Fydun M5 LCD Display:

  1. Sediakan Hendal: Ensure the handlebar area where you intend to mount the display is clean and free from obstructions. The display supports 31.8mm and 22.2mm handlebar diameters.
  2. Pasang Paparan: Securely attach the display bracket to your electric bike or scooter's handlebar. Use the appropriate mounting aperture for your handlebar size. Tighten the screws firmly but do not overtighten.
  3. Sambungkan Unit Kawalan: Attach the separate control unit (buttons) to a convenient location on your handlebar, typically near your thumb for easy access.
  4. Connect the 5-Pin Cable: Locate the 5-pin connector on your electric bike/scooter's controller or wiring harness. Carefully align the pins and connect the display's cable. Ensure a snug fit. Refer to the pinout diagram for correct wiring if you are performing a custom installation or replacement.
  5. Pengurusan Kabel: Halakan kabel dengan kemas di sepanjang hendal dan rangka, pasangkannya dengan pengikat kabel jika perlu, untuk mengelakkan gangguan pada stereng atau bahagian yang bergerak.
  6. Kuasa Awal Hidup: After installation, power on your electric bike/scooter to check if the display illuminates and shows data correctly.
Fydun M5 LCD Display mounted on a handlebar with control unit

Image: The M5 LCD Display and its control unit mounted on a bicycle handlebar, showing the typical installation setup.

5-pin connector wiring diagram for Fydun M5 LCD Display

Image: Detailed diagram of the 5-pin connector, indicating the color and function of each wire (Red, Blue, Black, Green, Yellow).

6. Arahan Operasi

The Fydun M5 LCD Display provides real-time information and control for your electric vehicle. Here's how to operate it:

6.1 Hidupkan/Mati Kuasa

  • To power on the display, press and hold the power button (usually the middle button on the control unit) for a few seconds.
  • Untuk mematikan kuasa, tekan dan tahan butang kuasa sekali lagi sehingga paparan dimatikan.

6.2 Paparan Maklumat

The display typically shows the following information:

  • Kelajuan: Kelajuan semasa menunggang (km/j atau mph).
  • Tahap Bateri: An energy bar indicating the remaining battery charge.
  • Jarak Perjalanan: Distance covered during the current trip.
  • Kawalan Pelayaran: Indication if cruise control is active.
  • Mod Manual: Indication if manual mode is active.

6.3 Button Functions (Control Unit)

The control unit typically has three buttons:

  • Butang Atas (▲): Used to increase values, navigate menus, or activate certain functions (e.g., higher assist level).
  • Butang Bawah (▼): Used to decrease values, navigate menus, or activate certain functions (e.g., lower assist level).
  • Middle Button (M / Power): Used to power on/off, confirm selections, or switch display modes (e.g., between ODO, Trip, Time).

Note: Specific button functions and display modes may vary slightly depending on the electric vehicle's controller settings. Refer to your vehicle's main manual for advanced settings.

Close-up of the Fydun M5 LCD Display control buttons

Imej: Jarak dekat view of the three-button control unit, showing the Up, Down, and Middle (M) buttons.

7. Penyelenggaraan

To ensure the longevity and optimal performance of your Fydun M5 LCD Display, follow these maintenance guidelines:

  • Pembersihan: Lap skrin paparan dan badan dengan lembut, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the screen or casing.
  • Pendedahan Air: While the display is waterproof, avoid submerging it in water or exposing it to high-pressure water jets. Ensure the connector is always dry before connecting or disconnecting.
  • Pemeriksaan Kabel: Periodically check all cables and connectors for any signs of wear, fraying, or damage. Ensure connections are secure.
  • Storan: If storing your electric vehicle for an extended period, ensure the display is clean and dry. Store in a cool, dry place away from direct sunlight.
  • Elakkan Kesan: Protect the display from physical impacts or drops, which can cause internal or external damage.

8. Penyelesaian masalah

If you encounter issues with your Fydun M5 LCD Display, refer to the following common troubleshooting steps:

MasalahKemungkinan PuncaPenyelesaian
Paparan tidak dihidupkan.
  • Loose or disconnected power cable.
  • Vehicle battery is dead or low.
  • Faulty display or controller.
  • Check all 5-pin connections for secure fit.
  • Charge the vehicle's battery.
  • Contact customer support if connections and battery are fine.
Bacaan kelajuan atau jarak yang salah.
  • Incorrect wheel diameter setting (if adjustable).
  • Kerosakan sensor.
  • Consult your electric vehicle's main manual for display settings adjustment.
  • Inspect speed sensor and magnet for proper alignment and damage.
Butang tidak bertindak balas.
  • Control unit cable loose.
  • Internal button malfunction.
  • Check the connection of the control unit to the main display cable.
  • Hubungi sokongan pelanggan.

If the problem persists after attempting these solutions, please contact Fydun customer support for further assistance.

9. Waranti dan Sokongan

Fydun products are manufactured to high-quality standards. For warranty information and customer support, please refer to the warranty card included with your purchase or visit the official Fydun webtapak.

When contacting support, please have your product model number (Fydunrkt1qmx8oz) and purchase date available.

Visit the Fydun Store for more information

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.