AIYIMA DC48V 10A GaN Power Supply Adapter User Manual

pengenalan

This manual provides essential information for the safe and efficient use of your AIYIMA DC48V 10A GaN Power Supply Adapter. This switching power supply is designed to convert AC110/220V input to a stable DC48V 10A output, suitable for various audio amplifiers, including the TPA3255 Stereo Audio Amplifier series (A07, A07 MAX, A08 PRO, A70).

The adapter features high efficiency, high power delivery, low power consumption, and is built with over-current, over-voltage, and short-circuit protection for reliable operation.

Apa yang ada dalam Kotak

1 x AIYIMA DC48V 10A GaN Power Supply Adapter (Model JYH37Z)

Note: An AC power cord is typically required and may be sold separately depending on the region.

Persediaan

Membongkar: Carefully remove the power supply from its packaging. Inspect for any signs of damage.
penempatan: Place the power supply on a stable, flat surface with adequate ventilation. Ensure it is not covered or placed in an enclosed space that could restrict airflow.
Sambung ke Amplebih hidup: Locate the DC input port on your compatible audio amplifier (e.g., AIYIMA A07, A07 MAX, A08 PRO, A70). Connect the DC output cable (5.5*2.5mm connector) from the power supply to the amplifier's DC input port. Ensure a secure connection.
Sambungkan ke Kuasa AC: Connect a suitable AC power cord (not included) to the AC input port on the power supply. Then, plug the AC power cord into a standard wall outlet (AC110V or AC220V, the unit supports both).
Hidupkan kuasa: Once all connections are secure, switch on the power supply (if it has a switch) and then power on your amplebih hidup.

belakang view of AIYIMA DC48V 10A GaN Power Supply Adapter showing AC input and DC output cable.

Imej: Belakang view of the power supply, illustrating the AC input port and the attached DC output cable.

Atas dan bawah view of AIYIMA DC48V 10A GaN Power Supply Adapter.

Imej: Atas dan bawah views of the power supply, showing the overall design and the AC input port.

Arahan Operasi

The AIYIMA DC48V 10A GaN Power Supply Adapter is designed for straightforward operation. Once properly connected to your audio amplifier and an AC power source, it will provide stable DC48V power.

Ensure the power supply is securely connected to both the AC mains and your amplebih hidup.
Jika anda amplifier has a power switch, turn it on after the power supply is connected and powered.
The power supply operates automatically within its specified voltage range (AC110V-220V). No manual voltage selection is required.
Pantau anda amplifier's performance. This power supply is designed to enhance power delivery, dynamics, and clarity for compatible amppenyelamat.

Depan view of AIYIMA DC48V 10A GaN Power Supply Adapter.

Imej: Depan view of the power supply, showing its compact design.

Penyelenggaraan

Untuk memastikan jangka hayat dan prestasi optimum bekalan kuasa anda, ikut garis panduan penyelenggaraan ini:

Pembersihan: Disconnect the power supply from the AC outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Avoid using liquid cleaners, aerosols, or solvents.
Pengudaraan: Ensure that the ventilation openings on the power supply are not blocked. Proper airflow is crucial to prevent overheating.
Storan: Jika menyimpan unit untuk tempoh yang lama, putuskan sambungannya daripada kuasa dan simpan di tempat yang sejuk dan kering jauh daripada cahaya matahari langsung dan suhu yang melampau.
Penjagaan Kabel: Avoid bending or crimping the power cables excessively. Regularly check cables for any signs of wear or damage.

Menyelesaikan masalah

If you encounter issues with your AIYIMA DC48V 10A GaN Power Supply Adapter, refer to the following common troubleshooting steps:

Masalah	Kemungkinan Punca	Penyelesaian
Tiada kuasa untuk amplebih hidup	Kord kuasa AC tidak bersambung atau longgar. Soket dinding tidak berfungsi. Power supply or ampsuis dimatikan.	Ensure AC power cord is securely plugged into both the power supply and the wall outlet. Uji salur keluar dinding dengan peranti lain. Verify both the power supply and amplifier are switched on.
Humming or noise from amplebih hidup	Isu gelung tanah. Gangguan daripada peranti elektronik lain.	Ensure all audio components are connected to the same power strip or outlet. Try isolating the power supply from other devices. Consider using a ground loop isolator if the issue persists.
Power supply feels excessively hot	Pengudaraan yang tidak mencukupi. Overload (drawing too much current).	Ensure proper airflow around the unit. Do not cover. Sahkan anda amplifier's power requirements do not exceed the power supply's 10A rating.

If the problem persists after attempting these solutions, please contact AIYIMA customer support.

Spesifikasi

AIYIMA DC48V 10A GaN Power Supply Adapter with dimensions labeled.

Image: Dimensions of the AIYIMA DC48V 10A GaN Power Supply Adapter.

Ciri	Perincian
Model	JYH37Z
Jenama	AIYIMA
Input Voltage	AC 110V / 220V (Auto-sensing)
Keluaran Voltage	DC 48V
Arus Keluaran	10A
DC Connector Size	5.5*2.5mm
Jenis Bahan	GaN (Gallium Nitride)
Dimensi Item (L x W x H)	8.18 x 3.58 x 1.69 inci (208 x 91 x 43 mm)
Berat Barang	2.5 paun
Pensijilan Keselamatan	TUV

Waranti

This AIYIMA power supply comes with a Waranti 12 bulan dari tarikh pembelian. Waranti ini meliputi kecacatan pembuatan dan kerosakan dalam penggunaan biasa. Ia tidak melindungi kerosakan yang disebabkan oleh penyalahgunaan, kemalangan, pengubahsuaian yang tidak dibenarkan, atau pemasangan yang tidak betul.

Sila simpan bukti pembelian anda untuk tuntutan waranti.

Sokongan

For technical assistance, troubleshooting, or warranty inquiries, please contact AIYIMA customer support through the retailer where the product was purchased or visit the official AIYIMA webtapak.

AIYIMA Official Store: ExploreHiFi·HearTrue on Amazon

AIYIMA JYH37Z