Runidur CS12

Runidur 2-in-1 10 Year Battery Operated Smoke and CO Detector

Model: CS12

Produk Selesaiview

The Runidur 2-in-1 Smoke and CO Detector provides comprehensive safety for your home. This device integrates both a photoelectric smoke sensor and an electrochemical carbon monoxide (CO) sensor into a single, compact unit. Designed for long-term reliability, it features a built-in 3V CR123A lithium battery, offering a continuous power supply for up to 10 years, eliminating the need for frequent battery replacements.

Its flat and slim design allows for discreet integration into any living space, while its 360° all-round inlet ensures precise and reliable detection of dangerous smoke or elevated carbon monoxide concentrations. In the event of an emergency, the detector emits a loud 85 dB alarm to alert occupants.

Two Runidur 2-in-1 Smoke and CO Detectors with a 10-year battery shown separately.

Image: Two Runidur 2-in-1 Smoke and CO Detectors, highlighting their compact design and the included 10-year battery.

Persediaan dan Pemasangan

The Runidur 2-in-1 Smoke and CO Detector is designed for easy installation, requiring minimal tools. Follow these steps to properly install your detector:

  1. Pilih Lokasi: Select a suitable location for installation. For optimal protection, install detectors on every level of your home, inside each sleeping area, and in the hallway outside of each sleeping area. Avoid installing near windows, doors, or air vents where drafts might interfere with detection.
  2. Sediakan Plat Pemasangan: Use this plate as a template to mark the positions for drilling holes on your ceiling or wall.
  3. Lubang gerudi: Using an electric drill, carefully drill holes at the marked positions. Insert the provided wall anchors into the drilled holes.
  4. Plat Pemasangan Selamat: Align the mounting plate with the drilled holes and secure it to the ceiling or wall using the provided screws. Ensure the plate is firmly attached.
  5. Install Detector: Align the detector with the mounting plate and twist it clockwise until it clicks securely into place. The detector is designed to be easily installed in approximately 5 minutes.
Diagram showing the installation process of the smoke detector on a ceiling, with screws and anchors.

Image: Step-by-step diagram illustrating the installation of the detector, including drilling holes, inserting anchors, and mounting the unit.

Close-up of a hand drilling holes for the detector mounting.

Image: A hand using a drill to prepare the mounting surface for the detector.

Pengaktifan Bateri

The detector comes with a pre-installed 10-year lithium battery. To activate the battery, ensure the detector is properly mounted onto its base. The device will automatically activate upon secure attachment to the mounting plate. No manual battery insertion is typically required for initial setup.

Dalaman view of the detector showing the CR123A battery compartment.

Imej: Meletup view of the detector showing the internal battery compartment with the CR123A lithium battery.

Arahan Operasi

Once installed, the Runidur detector continuously monitors for smoke and carbon monoxide. It is equipped with a test/mute button for easy functionality checks and alarm silencing.

Menguji Pengesan

It is recommended to test your detector weekly to ensure proper operation. To test:

Diagram showing how to press the test button and the components of the detector including alarm, LED, test/mute button, and smoke entrance.

Image: A diagram illustrating the location of the test/mute button and other key components like the alarm speaker, LED lamp, and smoke entrance.

A finger pressing the test button on the smoke detector.

Image: A close-up of a finger pressing the central test button on the detector.

Fungsi Penggera

The detector is designed to alert you to two types of hazards:

In both cases, the alarm volume exceeds 85 dB at 3 meters, ensuring it is clearly audible.

Smoke detector alarming in a living room with a fireplace, indicating smoke detection.

Image: A smoke detector mounted above a fireplace, emitting an alarm signal, illustrating its function in detecting smoke.

Smoke detector with 360-degree CO detection indicated by circles and CO ppm values.

Image: A visual representation of the detector's 360-degree carbon monoxide detection capability, showing CO concentration levels.

Fungsi Redam

In case of a false alarm (e.g., from cooking fumes), you can temporarily silence the alarm. Press the Test/Mute button once to activate the mute function. The alarm will silence for a short period, typically 5-10 minutes, before re-evaluating the air quality. If the hazardous condition persists, the alarm will reactivate.

Video Produk Rasmi

Video: An official product video demonstrating the features and installation of the Runidur Smoke and Carbon Monoxide Detector. This video provides a visual guide to setting up and understanding the basic operation of the device.

Penyelenggaraan

Regular maintenance ensures the longevity and effectiveness of your Runidur detector.

Menyelesaikan masalah

If your Runidur detector is not operating as expected, refer to the following common issues and solutions:

MasalahKemungkinan PuncaPenyelesaian
Detector chirps periodically (e.g., every 30-60 seconds).Bateri lemah.The 10-year battery is sealed and not replaceable. This indicates the unit has reached its end-of-life or the battery is failing prematurely. Replace the entire detector unit.
Bunyi penggera tanpa asap atau CO2 yang jelas.False alarm due to cooking fumes, steam, or dust.Press the Test/Mute button to silence the alarm. Ventilate the area. If the alarm continues after ventilation, there might be a real hazard.
Detector does not respond to test button.Unit not properly activated or faulty.Ensure the detector is securely twisted onto its mounting plate. If it still doesn't respond, the unit may be faulty and needs replacement.
Penggera berbunyi secara berterusan.Presence of smoke or high CO levels.Evacuate all occupants immediately. Call emergency services (fire department). Do not re-enter until the area is cleared by professionals.

If you experience persistent issues not covered here, please contact Runidur customer support.

Spesifikasi

CiriPerincian
JenamaRunidur
Nombor ModelCS12
Sumber KuasaBattery Powered (3V CR123A Lithium, included)
Hayat Bateri10 Years (continuous)
Jenis SensorFotoelektrik (Asap), Elektrokimia (CO)
Kelantangan Penggera> 85 dB at 3 meters
Dimensi Produk3.15"D x 1.25"W x 3.2"H
Berat Barang0.3 paun (lebih kurang 4.8 auns)
bahanABS (Flame Retardant)
Jenis PemasanganWall/Ceiling Mount (Screws and brackets included)
Diagram showing the dimensions of the smoke detector: 95mm diameter and 28mm thickness.

Image: A diagram illustrating the compact dimensions of the detector, showing its diameter and thickness.

belakang view of the smoke detector showing model number CS12, battery specifications, and installation instructions.

Image: The back of the detector, displaying product information such as model number, battery type, and basic instructions.

Waranti dan Sokongan

Runidur products are manufactured to high-quality standards. For specific warranty details, please refer to the packaging or contact Runidur customer support directly. In most cases, products with a 10-year sealed battery are covered for the duration of the battery life, indicating the expected operational lifespan of the unit.

For technical assistance, troubleshooting, or any product-related inquiries, please contact: