pengenalan
The SIRUI AM-DSH Double Handle is designed to enhance the stability and control of your DJI Ronin Series gimbal during video production. This accessory allows for two-handed operation, providing improved ergonomics and smoother camera movements. It features multiple mounting points for additional accessories, expanding your setup's functionality.
This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your SIRUI AM-DSH Double Handle.
Keserasian
The SIRUI AM-DSH Double Handle is compatible with the following DJI Ronin Series gimbals:
- DJI Ronin-S
- DJI Ronin-SC
- DJI-RS2
- DJI RSC 2
- DJI-RS3
- DJI RS 3 Pro
- DJI-RS4
- DJI RS 4 Pro
Apa yang ada dalam Kotak
Selepas membuka kotak, sila sahkan bahawa semua komponen ada:
- 1x SIRUI AM-DSH Double Handle Kit (includes left & right handles and lever arms)
- 2x Mini NATO Rails
- 4x M4x6 Hex Socket Screws
- 1x L-shaped Hex Key 3.0
Arahan Persediaan
1. Attaching the NATO Rails (for Ronin-S and Ronin-SC only)
For DJI Ronin-S and Ronin-SC gimbals, you must first install the provided mini NATO rails onto the gimbal's "Ronin Series Accessories (RSA)" port. Use the M4x6 hex socket screws and the L-shaped hex key to secure them firmly.
Gimbals such as RS 4, RS 4 Pro, RS 3, RS 3 Pro, RS 2, and RSC 2 have integrated NATO rail interfaces, allowing direct attachment of the handles without these mini rails.
2. Attaching the Double Handle
Once the NATO rails are in place (or if your gimbal has integrated NATO interfaces), slide the double handle's clamps onto the NATO rails. Secure the handles by tightening the NATO clamp lock knobs. Ensure both handles are securely fastened before use.
The NATO clamp and handle arms are designed with an anti-drop pin to prevent accidental detachment, providing an extra layer of security during operation.
Arahan Operasi
1. Adjusting Handle Width
The arms of the double handle feature a sliding groove. You can adjust the horizontal width of the handles to suit your shooting requirements and comfort. Loosen the NATO clamp lock knobs, slide the handles to the desired position, and then re-tighten the knobs firmly to secure the width.
2. Vertical or Inverted Installation
The double handle arms include grooves on both the upper and lower ends. This design allows for flexible installation, enabling you to mount the gimbal in an upright or inverted position. This versatility is beneficial for achieving various camera angles and improving shooting flexibility.
3. Aksesori Pemasangan
The SIRUI AM-DSH Double Handle is equipped with multiple mounting points to expand your accessory options:
- Pemasangan Kasut Sejuk: For attaching accessories like LED lights or microphones.
- Lubang Berulir 1/4": Standard mounting points for various camera accessories.
- Lubang Berulir 3/8": Larger mounting points, some with locating holes for anti-twist functionality.
These points allow for the attachment of magic arms, external monitors, microphones, wireless receivers, and other essential gear, enhancing your video production capabilities.
Penyelenggaraan
To ensure the longevity and optimal performance of your SIRUI AM-DSH Double Handle, follow these maintenance guidelines:
- Pembersihan: Wipe the handle with a soft, dry cloth after each use to remove dust and debris. For stubborn dirt, use a slightly damp kain dan kemudian keringkan dengan teliti. Elakkan bahan kimia yang keras atau pembersih yang kasar.
- Storan: Store the handle in a dry, cool place away from direct sunlight and extreme temperatures.
- Pemeriksaan: Periodically check all screws and connections to ensure they are tight. Re-tighten any loose components using the provided hex key.
- Elakkan beban berlebihan: Do not exceed the recommended maximum load capacity of 5 kg (11 lbs) to prevent damage to the handle or your gimbal.
Menyelesaikan masalah
If you encounter issues with your SIRUI AM-DSH Double Handle, consider the following common solutions:
- Pemegang terasa longgar: Ensure all NATO clamp lock knobs are fully tightened. Check that the anti-drop pins are correctly engaged.
- Accessories not securing properly: Verify that the accessory's mounting screw or cold shoe foot is compatible with the handle's mounting points (1/4", 3/8", cold shoe). Ensure screws are tightened adequately.
- Difficulty adjusting handle width: Loosen the NATO clamp lock knobs sufficiently before attempting to slide the handles. Ensure no debris is obstructing the sliding groove.
- Gimbal instability: While the double handle enhances stability, ensure your gimbal itself is properly balanced and calibrated according to its manufacturer's instructions.
If problems persist, please contact SIRUI customer support for further assistance.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Model | AM-DSH |
| bahan | Aloi Aluminium 6061 |
| Berat badan | 600g (±5g) / 1.32lbs (±0.01lbs) |
| Kapasiti Beban Maksimum | 5 kg / 11 paun |
| Mengendalikan Dimensi | 154.3 x 48 x 38mm / 6.07" x 1.89" x 1.50" |
| Lever Arm Dimensions | 179.5 x 44 x 29.5mm / 7.07" x 1.73" x 1.16" |
| Folded Size (approx.) | 220mm (L) x 120mm (W) x 250mm (H) |
| Titik pemasangan | Cold Shoe, 1/4" Threaded Holes, 3/8" Threaded Holes |
| Gimbal yang Serasi | DJI RS 4, RS 4 Pro, RS 3, RS 3 Pro, RS 2, RSC 2, Ronin-S, Ronin-SC |
Waranti dan Sokongan
SIRUI products are manufactured to high-quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official SIRUI webtapak.
For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact SIRUI customer service through their official webtapak atau maklumat hubungan yang diberikan bersama pembelian anda.
Sumber Dalam Talian: www.sirui.com