Brilagi Clare Ceiling Lamp dengan Penderia Gerakan

1. Pengenalan

Thank you for choosing the Brilagi Clare Ceiling Lamp. This modern ceiling lamp features a sleek design, three E27 lamp fittings, and an integrated motion sensor for convenient and energy-efficient lighting. This manual provides essential information for the safe installation, operation, and maintenance of your new lamp.

Image 1.1: The Brilagi Clare Ceiling Lamp in a contemporary setting, showcasing reka bentuk dan pencahayaannya.

2. Maklumat Keselamatan

Sila baca semua arahan keselamatan dengan teliti sebelum pemasangan dan penggunaan. Simpan manual ini untuk rujukan masa hadapan.

• Keselamatan Elektrik: Always disconnect power at the main circuit breaker before installing, cleaning, or servicing the lamp. Installation should be performed by a qualified electrician if you are unsure.
• Voltage: Pastikan bekalan voltage sepadan dengan lamp's requirements (230V).
• Mentol: Use only E27 bulbs that do not exceed the maximum wattage dinyatakan untuk lamp.
• Persekitaran: l iniamp is designed for indoor use only. Do not expose it to moisture or extreme temperatures.
• Pengendalian: Mengendalikan lamp with care to avoid damage. Do not modify the product in any way.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Brilagi Clare Ceiling Lamp unit
• Penderia Gerakan Bersepadu
• Perkakasan pemasangan (skru, palam dinding)
• Manual Pengguna

Note: E27 light bulbs are not included and must be purchased separately.

4. Persediaan dan Pemasangan

Follow these steps for safe and proper installation of your Brilagi Clare Ceiling Lamp.

4.1 Alat Diperlukan

• Pemutar skru
• Gerudi (jika diperlukan untuk palam dinding)
• Pensel
• Wire strippers (if necessary)

4.2 Langkah Pemasangan

1. Putuskan Kuasa: Turn off the electricity supply at the main circuit breaker before starting any electrical work.
2. Sediakan Permukaan Pemasangan: Choose a suitable location on the ceiling. Mark the drilling points for the mounting bracket using the lamp's base as a template.
3. Pasang Pendakap Pelekap: Drill holes if necessary and secure the mounting bracket to the ceiling using the provided screws and wall plugs.


Imej 4.1: Dalaman view daripada lamp, showing the mounting points and wiring area.

4. Sambungan wayar: Connect the household electrical wires to the lamp's terminal block. Ensure correct polarity (Live, Neutral, Earth) according to local electrical codes. Secure all connections tightly.
5. Pasang Mentol: Screw three E27 light bulbs (not included) into the lamp fittings. Ensure they are securely tightened.
6. Lampirkan Lamp Badan: Selaraskan l dengan berhati-hatiamp body with the mounting bracket and secure it in place. Follow the specific locking mechanism (e.g., twist-lock or screw-in) as indicated by the product design.
7. Pulihkan Kuasa: Sebaik sahaja lamp is securely installed and all connections are checked, restore power at the main circuit breaker.

5. Arahan Operasi

The Brilagi Clare Ceiling Lamp is designed for simple operation with its integrated motion sensor.

5.1 Fungsi Sensor Gerakan

Lamp is equipped with a motion sensor that automatically activates the light when movement is detected within its range. The light will remain on for a set duration and turn off automatically after no further motion is detected.

Image 5.1: The Brilagi Clare Ceiling Lamp highlighting the integrated motion sensor functionality.

• Pengaktifan Automatik: The light will turn on when motion is detected.
• Penyahaktifan Automatik: The light will turn off after a period of no detected motion.
• Penjimatan Tenaga: The motion sensor helps conserve energy by ensuring the light is only on when needed.

5.2 Operasi Am

Once installed and powered, the lamp will operate automatically based on the motion sensor. There are no manual switches on the lamp itself. Control is typically managed via the room's main light switch, which can be used to cut power to the lamp jika dikehendaki.

Image 5.2: The Brilagi Clare Ceiling Lamp fully illuminated, demonstrating its light output.

6. Penyelenggaraan

6.1 Pembersihan

• Sentiasa putuskan sambungan kuasa sebelum membersihkan.
• Lap lamp dengan lembut, kering, atau sedikit keringamp kain.
• Jangan gunakan pembersih yang melelas, pelarut atau bahan kimia yang keras, kerana ini boleh merosakkan kemasan.

6.2 Penggantian Mentol

• Disconnect power at the main circuit breaker.
• Keluarkan l dengan berhati-hatiamp's diffuser or cover to access the E27 sockets.
• Tanggalkan mentol E27 lama melawan arah jam.
• Screw in a new E27 bulb clockwise, ensuring it is securely seated.
• Replace the diffuser/cover.
• Pulihkan kuasa.

7. Penyelesaian masalah

If you encounter issues with your Brilagi Clare Ceiling Lamp, rujuk kepada masalah dan penyelesaian biasa berikut:

8. Spesifikasi

9. Maklumat Waranti

The Brilagi Clare Ceiling Lamp comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase or contact Brilagi customer support for detailed information regarding warranty terms and conditions.

10. Sokongan

For further assistance, technical support, or inquiries regarding your Brilagi Clare Ceiling Lamp, please contact Brilagi customer service through their official webtapak atau maklumat hubungan yang diberikan bersama dokumentasi produk anda.