1. Pengenalan
This manual provides essential information for the safe installation, operation, and maintenance of your Onforu 100W LED Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
2. Maklumat Keselamatan
AMARAN: Risiko renjatan elektrik. Putuskan sambungan kuasa pada fius atau pemutus litar sebelum pemasangan atau servis.
- Ensure the power supply is turned off before attempting any installation, maintenance, or adjustment.
- Pemasangan hendaklah dilakukan oleh juruelektrik yang berkelayakan atau orang yang mempunyai pengetahuan elektrik.
- This product is designed for outdoor use and is IP65 waterproof rated. However, ensure all connections are properly sealed to maintain water resistance.
- Jangan pasang berhampiran bahan mudah terbakar atau di kawasan yang mempunyai atmosfera mudah meletup.
- Jangan melihat terus ke sumber cahaya LED semasa dinyalakan, kerana ia boleh menyebabkan kerosakan mata.
- Pastikan permukaan pelekap boleh menyokong berat lekapan.
3. Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:
- LED Security Light Fixture (Model BDB100G-3)
- Perkakasan Pemasangan (skru, nat dawai)
- Manual Arahan
4. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nombor Model | BDB100G-3 |
| Wattage | 100W |
| Kecerahan | 9000 Lumen |
| Suhu Warna | 6000K (Putih Siang) |
| Voltage | 120 Volt |
| Sudut Penderia Pergerakan | 180° |
| Julat Pengesanan Pergerakan | 16.4 ft - 72 ft (5m - 22m) |
| Lighting Time Adjustment | 10 saat - 7 minit |
| Penilaian Ketahanan Air | IP65 |
| bahan | Die-cast Aluminum, Plastic |
| Dimensi (L x W x H) | 15.3" x 8.2" x 4.7" (38.8cm x 20.8cm x 11.9cm) |
| Berat badan | 4.4 paun (2 kg) |
| Jenis Pemasangan | Wall Mount & Soffit Mount |
| Ideal Mounting Height | 10 ft - 16.4 ft (3m - 5m) |
5. Persediaan dan Pemasangan
Before installation, ensure the power is OFF at the circuit breaker.
5.1 Komponen Selesaiview
Imej 5.1: Meletup view of the security light, highlighting the 100W LED beads and high-precision light transmission design.
5.2 Memasang Lekapan
- Sediakan Permukaan Pemasangan: Choose a suitable location, ideally between 10 ft and 16.4 ft (3m - 5m) from the ground, ensuring the motion sensor has an unobstructed view of the desired detection area.
- Pasang Pendakap Pelekap: Secure the provided mounting bracket to the junction box using the included screws.
- Sambungan Pendawaian: Connect the household wiring to the fixture's wires. Typically, this involves:
- Hitam (Langsung) ke Hitam (Langsung)
- Putih (Neutral) kepada Putih (Neutral)
- Green/Bare Copper (Ground) to Green (Ground)
- Selamatkan Lekapan: Carefully align the fixture with the mounting bracket and secure it in place. Ensure no wires are pinched.
Image 5.2: Installation diagram illustrating the steps to mount the security light to a wall or soffit.
Image 5.3: Detailed diagram showing the physical dimensions of the light heads and base, along with the standard three-wire electrical connections.
5.3 Adjusting Light Heads and Sensor
The three light heads can be adjusted independently to cover a wide area. The motion sensor can also be angled for optimal detection.
Image 5.4: The adjustable design allows for precise aiming of the light heads and motion sensor to cover a 270-degree detection zone.
6. Arahan Operasi
Once installed and power is restored, the light will enter a warm-up period (approximately 30-60 seconds) during which it may turn on and off. After this, it will operate according to the sensor settings.
6.1 Tetapan Sensor Gerakan
The motion sensor has three adjustable dials:
Image 6.1: The motion sensor features three adjustable dials for customizing detection parameters.
- DISTANCE (SENS): Adjusts the motion detection sensitivity and range from 16.4 ft to 72 ft. Turn clockwise for higher sensitivity/longer range, counter-clockwise for lower sensitivity/shorter range.
- MASA: Sets how long the light remains on after motion is detected, ranging from 10 seconds to 7 minutes. Turn clockwise for longer illumination, counter-clockwise for shorter.
- LUX (Day/Night Mode): Menentukan tahap cahaya ambien di mana sensor menjadi aktif.
- Day Mode (Sun icon): Motion detection works during both day and night.
- Mod Malam (ikon Bulan): Motion detection works only at night or in low-light conditions.
6.2 Prestasi Optimum
Image 6.2: The motion sensor provides versatile detection for areas like driveways, with a wide sensing angle.
Image 6.3: The light provides super bright and ultra-wide illumination, covering a significant area.
7. Penyelenggaraan
The Onforu security light is designed for minimal maintenance. Regular cleaning can help maintain optimal performance.
7.1 Pembersihan
- Ensure the power is OFF before cleaning.
- Lapkan lekapan dengan lembut, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or lens.
- Pastikan kanta sensor gerakan bersih dan bebas daripada halangan (cth., kotoran, labah-labahwebs) untuk memastikan operasi yang betul.
7.2 Rintangan Cuaca
Image 7.1: The IP65 waterproof rating ensures the light functions reliably in rain, sleet, snow, and sun.
8. Penyelesaian masalah
If you experience issues with your security light, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | Tiada bekalan kuasa. LUX setting is too low (Night Mode during daytime). Motion sensor obstructed or faulty. | Periksa sambungan pemutus litar dan pendawaian. Adjust LUX dial to Day Mode (Sun icon) for testing. Clear any obstructions from the sensor. Ensure sensor is aimed correctly. |
| Lampu kekal menyala secara berterusan. | Pergerakan berterusan dalam kawasan pengesanan. Tetapan TIME terlalu panjang. Kerosakan sensor. | Ensure no constant movement (e.g., tree branches, pets) is triggering the sensor. Adjust TIME dial to a shorter duration. Jika masalah berterusan, hubungi sokongan pelanggan. |
| Light turns on too frequently or not enough. | DISTANCE (SENS) setting is too high/low. Sensor placement or angle is not optimal. Environmental factors (e.g., heat sources, reflective surfaces). | Adjust DISTANCE dial to desired sensitivity. Reposition or re-angle the sensor to cover the intended area and avoid unwanted triggers. Ensure the sensor is not pointed at direct heat sources or highly reflective surfaces. |
| Keluaran cahaya malap atau tidak konsisten. | Turun naik kuasa. Damaged LED beads. | Ensure stable power supply. If individual LED beads are visibly not working, the unit may require replacement. |
| Fixture feels wobbly after installation. | Pemasangan longgar. Main connection to base plate not fully secured. | Ensure all mounting screws are tightened. Verify the main light assembly is firmly attached to the base plate. |
9. Waranti
This Onforu product is covered by a Waranti terhad 2 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.
Sila simpan bukti pembelian anda untuk tuntutan waranti.
10. Sokongan Pelanggan
If you have any questions, require technical assistance, or need to make a warranty claim, please contact Onforu customer support through the retailer's platform or visit the official Onforu webtapak untuk maklumat hubungan.
Sokongan dalam talian: Visit the Onforu Store on Amazon