User Manual: Tire Inflator Portable Air Compressor

pengenalan

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new Portable Tire Inflator. Please read this manual thoroughly before using the device and retain it for future reference.

Arahan Keselamatan

• Pastikan peranti dicas sepenuhnya sebelum digunakan.
• Do not operate the inflator near flammable liquids or gases.
• Jauhkan daripada kanak-kanak.
• Do not over-inflate tires; always refer to the vehicle's recommended tire pressure.
• Avoid continuous operation for extended periods to prevent overheating. Allow the device to cool down if it becomes hot.
• Jangan buka atau ubah suai peranti.
• Simpan di tempat kering yang jauh daripada cahaya matahari langsung dan suhu yang melampau.

Kandungan Pakej

• Inflator Tayar Mudah Alih
• Tiub Inflasi
• Kabel Pengecas USB
• 4 x Nozzles (for car, bike, ball, swimming ring)

Image: The portable tire inflator unit shown with its included accessories: an inflation hose, a USB charging cable, and four different nozzle adapters for various inflation needs.

Produk Selesaiview

Familiarize yourself with the components of your tire inflator:

• Paparan Digital: Menunjukkan tekanan semasa, tekanan sasaran dan aras bateri.
• Pressure Unit Button (R): Short press to switch between BAR/PSI/KPA/KG/CM^2. Long press to turn off.
• +/- Butang: Adjust target pressure.
• Butang Kuasa: Start/stop inflation.
• Lampu LED: Menyediakan pencahayaan dalam keadaan cahaya malap.
• Pelabuhan Inflasi: Where the inflation tube connects.
• Port Pengecasan USB: Untuk mengecas semula peranti.

Imej: A terperinci view of the inflator's digital display, highlighting the pressure unit switch button (R) and the plus/minus buttons for adjusting the preset pressure.

Persediaan

1. Caj Permulaan: Before first use, fully charge the inflator using the provided USB cable. The digital display will indicate charging status. A full charge takes approximately 3-4 hours.
2. Pasangkan Tiub Inflasi: Screw the inflation tube securely into the inflation port on the device.

Arahan Operasi

General Inflation Steps:

1. Sambungkan ke Injap Tayar: Screw the inflation tube's nozzle onto the tire valve stem. Ensure a tight connection to prevent air leakage.
2. Hidupkan kuasa: The device typically powers on automatically when the inflation tube is connected or by pressing any button.
3. Pilih Unit Tekanan: Short press the "R" button to cycle through pressure units (BAR, PSI, KPA, KG/CM^2) until your desired unit is displayed.
4. Tetapkan Tekanan Sasaran: Use the "+" and "-" buttons to adjust the target pressure to the recommended value for your item (e.g., vehicle tire, bicycle tire, sports ball).
5. Mulakan Inflasi: Press the power button to begin inflation. The digital display will show the current pressure increasing.
6. Pemadaman Automatik: The inflator will automatically stop when the preset target pressure is reached.
7. Putuskan sambungan: Unscrew the inflation tube from the valve stem.
8. Matikan: Long press the "R" button to turn off the inflator.

Image: A step-by-step visual guide demonstrating the easy operation of the tire inflator, including connecting the hose, setting pressure, starting inflation, and the automatic shut-off feature.

Menggunakan Lampu LED:

The built-in LED light can be activated to provide illumination during low-light conditions or nighttime use. Refer to the device's specific button for light activation (often a dedicated button or a long press of the power button).

Image: The tire inflator in use, with its integrated LED light illuminating the tire valve area, demonstrating its utility for nighttime or low-light inflation.

Menggunakan Muncung Berbeza:

The inflator comes with 4 extra nozzles for various applications:

• Needle Nozzle: For sports balls (e.g., basketballs, footballs).
• Muncung Tirus: For inflatable toys, swimming rings, and other low-pressure inflatables.

Attach the appropriate nozzle to the inflation tube before connecting to the item to be inflated.

Image: An illustration detailing the four preset inflation modes available on the device, showing recommended PSI levels for car tires (36 PSI), motorcycles (33 PSI), bicycles (30 PSI), and balls (8 PSI).

Penyelenggaraan

• Pembersihan: Lap bahagian luar inflator dengan lembut, damp kain. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
• Storan: Store the inflator and its accessories in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the inflation tube is neatly coiled.
• Penjagaan Bateri: To prolong battery life, avoid fully discharging the battery frequently. Recharge the device periodically if not used for a long time.

Menyelesaikan masalah

Spesifikasi

• Nama Model: ST-5007
• Tekanan Operasi Maksimum: 150 PSI
• Kapasiti Aliran Udara: 12 L / Min
• Bateri: 2 * 2000 mAh high-density USB rechargeable Lithium-ion batteries (included)
• Masa Pengecasan: 3-4 jam
• Masa Penggunaan Berterusan: Approximately 30 minutes (on full charge)
• Input Voltage: 12V (from internal battery)
• Tahap Bunyi: 10 dB (as per specification, though typical operating noise might be higher)
• Berat Barang: 1.26 paun
• Dimensi: 8.39 x 6.26 x 2.64 inci (Saiz Pakej)

Waranti & Sokongan

Produk ini disertakan dengan a Waranti 1 tahun from the date of purchase. For warranty claims, technical support, or any inquiries, please contact the seller or manufacturer through your purchase platform.

Sila simpan bukti pembelian anda untuk pengesahan waranti.