Calex Spot On Wireless Wall Lamp Manual Pengguna

1. Pengenalan

The Calex Spot On series offers powerful, wireless lighting for various surfaces. This compact lamp is designed for ease of use and efficient illumination in areas without direct power access. Its slim profile and integrated sensors make it a versatile lighting solution for your home.

Image: A single Calex Spot On wireless wall lamp, highlighting its compact and sleek design with the motion sensor visible in the center.

2. Ciri-ciri Utama

• Kemudahan Tanpa Wayar: Operates on 3x AAA batteries, eliminating the need for power outlets. Ideal for locations without mains power.
• Reka bentuk Slim: Only 10mm thick, ensuring a discreet and stylish appearance.
• Pemasangan Mudah: Simple to attach to various surfaces using the included 3M Tape and Magnet.
• Efficient Day/Night Sensor: Features a PIR sensor with a 60° range for automatic activation upon motion detection.
• Penjimatan Tenaga: Equipped with built-in timers to conserve energy and ensure long-lasting use without waste.
• Cahaya boleh laras: Focuses light where it is needed.

3. Persediaan dan Pemasangan

Follow these steps to set up your Calex Spot On Wireless Wall Lamp:

1. Buka Pembungkusan Kandungan: Carefully remove all items from the packaging. Ensure you have the three wall lamps, 3M adhesive tape, and magnets.
2. Masukkan Bateri: Setiap lamp requires 3x AAA batteries (not included). Locate the battery compartment on the back of the lamp, open it, and insert the batteries, observing the correct polarity (+/-). Close the compartment securely.
3. Pilih Lokasi Pemasangan: Select a clean, dry, and flat surface for installation. Consider areas like staircases, hallways, closets, or dark corners where additional light is needed.
4. Pilihan Pemasangan:
   • Menggunakan Pita Pelekat 3M: Peel off the protective backing from the 3M adhesive tape and firmly press it onto the back of the lamp. Then, press the lamp firmly onto the desired surface for at least 30 seconds.
   • Using Magnets: If mounting on a metallic surface, the integrated magnet allows for direct attachment. Alternatively, use the included metal plates (if provided) with adhesive backing to create a magnetic surface on non-metallic areas, then attach the lamp.
5. Kefungsian Ujian: Once mounted, test the motion sensor and light activation. The lamp should illuminate when motion is detected within its range in low-light conditions.

Image: Calex Spot On lamp providing illumination on a staircase. The lamp is discreetly mounted on the wall, casting warm light downwards onto the steps, enhancing visibility and safety.

Imej: Dari dekat view of the Calex Spot On lamp installed on a wall, demonstrating its light output. The warm light is directed downwards, highlighting the texture of the wall and the edge of the wooden staircase.

4. Arahan Operasi

The Calex Spot On lamp is designed for automatic operation based on ambient light and motion detection.

• Pengaktifan Automatik: The integrated Day/Night PIR sensor detects motion within a 60° range and up to 3.5 meters. The lamp will automatically turn on when motion is detected in low-light conditions.
• Tempoh Pencahayaan: Once activated, the lamp will remain lit for approximately 20 seconds. If motion continues to be detected, the light will stay on. After 20 seconds of no motion, the lamp will turn off to conserve battery life.
• Pemasa Penjimatan Tenaga: Lamp is equipped with internal timers to optimize battery usage. There are no user-adjustable settings for these timers.

Image: The Calex Spot On lamp providing subtle illumination in a dark bedroom setting. The light is cast onto the floor beside a bed, demonstrating its utility as a night light or for navigating in low-light conditions.

5. Penyelenggaraan

To ensure optimal performance and longevity of your Calex Spot On Wireless Wall Lamp, ikut garis panduan penyelenggaraan mudah ini:

• Pembersihan: Lap lamp gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or internal components.
• Penggantian Bateri: When the light output diminishes or the lamp stops activating, it's time to replace the batteries. Open the battery compartment, remove the old AAA batteries, and insert new ones, ensuring correct polarity. Dispose of old batteries responsibly.
• Kawasan Sensor: Keep the motion sensor lens clean and free from dust or obstructions to ensure accurate detection.
• Storan: Jika menyimpan lamp for an extended period, remove the batteries to prevent leakage and potential damage.

6. Penyelesaian masalah

If you encounter issues with your Calex Spot On Wireless Wall Lamp, rujuk kepada masalah dan penyelesaian biasa berikut:

7. Spesifikasi

8. Waranti dan Sokongan

For warranty information and customer support, please refer to the official CALEX webtapak atau hubungi peruncit anda. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.

Untuk bantuan lanjut atau pertanyaan teknikal, sila layari CALEX Store on Amazon or the official CALEX webtapak.