PIURIFY HWB2024 Hydrogen Water Bottle Generator - Instruction Manual

pengenalan

This manual provides essential information for the safe and effective operation of your PIURIFY HWB2024 Hydrogen Water Bottle Generator. Please read these instructions thoroughly before first use and retain for future reference.

Maklumat Keselamatan Penting

• Jangan tenggelamkan unit asas dalam air. The electronic components are located in the base and should not be exposed to water. Wipe dry immediately if wet.
• Fill water only up to the maximum fill line. Overfilling may cause leaks or affect performance.
• Do not run the hydrogen generation cycle more than twice consecutively. Excessive consecutive cycles may affect the device's longevity.
• Cuci tangan sahaja. The bottle and its components are not dishwasher safe.
• Use only potable water (filtered, plain, or spring water). Do not use carbonated beverages or other liquids.
• Jauhkan daripada kanak-kanak.

Kandungan Pakej

Your PIURIFY HWB2024 Hydrogen Water Bottle Generator package includes:

• Hydrogen Water Generator Bottle (10 oz capacity)
• Kabel Pengecas USB-C
• Nasal Cannula Tube
• Panduan Pengguna Komprehensif
• IHSA Certification (documentation)

Persediaan

1. Pengecasan Awal

Before first use, fully charge the device. Connect the provided USB-C charging cable to the port on the base unit and to a compatible USB power source. The built-in 1800mAh lithium battery typically requires approximately 3 hours for a full charge. Note that some USB-C PD (Power Delivery) chargers may not be compatible; use a standard USB-A port or a charger that can operate in a lower power mode if charging issues occur.

2. Preparing the Bottle

1. Unscrew the top cap and the base unit from the glass bottle.
2. Wash the glass bottle and the top cap with warm water and mild soap. Do not wash the base unit.
3. Bilas dengan teliti dan biarkan kering di udara.
4. Reassemble the bottle, ensuring the base unit is securely screwed onto the glass bottle.

Arahan Operasi

Hydrogen Water Generation (Drinking)

1. Fill the bottle: Unscrew the top cap and fill the glass bottle with potable water (filtered, plain, or spring water) up to the maximum fill line. Do not overfill.
2. Pilih Kitaran: Securely screw the top cap back on. Press and hold the power button on the base for 2 seconds to turn on the device. The OLED display will show the default 5-minute cycle (approx. 1600 PPB). Tap the power button again to switch to the 10-minute cycle (up to 4100+ PPB).
3. Start Generation: The device will automatically begin the selected cycle, indicated by a blue light and bubbling. The OLED display will show a countdown timer or PPB concentration.
4. Nikmati: Once the cycle is complete, the device will automatically shut off. Drink the freshly infused hydrogen water immediately for best results, or store it for up to 6 hours.

Image: Four simple steps to generate hydrogen water.

Hydrogen Inhalation (Nasal Cannula)

The PIURIFY HWB2024 also supports hydrogen inhalation using the included nasal cannula.

1. Prepare the base: Unscrew the glass bottle from the base unit.
2. Insert Moisture Plug: Fill the small moisture plug (included) with purified water. Screw this plug into the base unit where the bottle normally attaches.
3. Connect Cannula: Attach one end of the nasal cannula tube to the moisture plug. Place the nasal prongs comfortably into your nostrils and loop the tube over your ears.
4. Start Inhalation: Press and hold the power button on the base for 2 seconds to turn on the device. Select your desired cycle (5 or 10 minutes) by tapping the button. The device will begin generating hydrogen for inhalation.

Penyelenggaraan

• Pembersihan: The glass bottle and top cap should be hand washed only with warm water and mild soap. Rinse thoroughly. Jangan tenggelamkan unit asas dalam air. Lap bahagian luar unit asas dengan iklanamp kain jika perlu.
• Storan: Simpan peranti di tempat yang sejuk dan kering apabila tidak digunakan.
• Mengurangkan: If mineral buildup occurs on the electrolysis plate in the base, consult the full user guide for descaling instructions.

Menyelesaikan masalah

• Peranti tidak dihidupkan: Ensure the device is fully charged. Connect to a compatible USB power source and allow sufficient charging time.
• No bubbles during operation: Verify that the bottle is filled with potable water and the base unit is securely attached. Ensure the device is charged and a cycle is selected. Distilled or purified water may not produce visible bubbles but will still be infused.
• Isu pengecasan: If the device does not charge, try using a different USB-A port or a charger that can deliver lower power, as some USB-C PD chargers may not be compatible.
• Inaccurate PPB readings: The OLED display provides an estimated PPB level. For precise measurements, specialized testing equipment is required.

For further assistance, please refer to the comprehensive user guide or contact PIURIFY customer support.

Spesifikasi

Image: Product dimensions and capacity.

Image: SPE/PEM technology details, showing harmful byproduct expulsion.

Image: Advanced design features including durable materials and leakproof cap.

Image: Official third-party certification for hydrogen concentration.

Waranti & Sokongan

The PIURIFY HWB2024 Hydrogen Water Bottle Generator comes with a Waranti Seumur Hidup. For any issues, including troubleshooting, replacements, or refunds, please contact PIURIFY customer support. They are available daily to provide fast and reliable assistance.

For detailed contact information, please refer to the comprehensive user guide provided with your product or visit the official PIURIFY webtapak.