SUNSMAI S12 Wet Dry Vacuum Cordless Floor Cleaner User Manual

1. Arahan Keselamatan Penting

Sila baca semua arahan dengan teliti sebelum menggunakan perkakas ini. Kegagalan mematuhi arahan ini boleh mengakibatkan renjatan elektrik, kebakaran atau kecederaan serius.

• This appliance is for household use only. Do not use outdoors or on commercial surfaces.
• Jangan rendamkan perkakas dalam air atau cecair lain.
• Sentiasa putuskan sambungan perkakas daripada salur keluar kuasa sebelum membersihkan atau melakukan penyelenggaraan.
• Jauhkan rambut, pakaian longgar, jari dan semua bahagian badan daripada bukaan dan bahagian yang bergerak.
• Gunakan hanya seperti yang diterangkan dalam manual ini. Gunakan hanya lampiran yang disyorkan pengilang.
• Jangan gunakan untuk mengambil cecair mudah terbakar atau mudah terbakar, seperti petrol, atau gunakan di kawasan yang mungkin terdapat.
• Jangan ambil apa-apa yang terbakar atau berasap, seperti rokok, mancis, atau abu panas.
• Berhati-hati semasa membersihkan tangga.
• Jangan gunakan tanpa tangki dan penapis di tempatnya.
• Simpan perkakas di dalam rumah di tempat yang sejuk dan kering.

2. Produk Lebihview

The SUNSMAI S12 is a cordless wet dry vacuum designed for one-step cleaning of hard floors. It vacuums and mops simultaneously, featuring a two-tank system for clean and dirty water, and a self-cleaning function.

Komponen

• Main Unit (Handle, Motor Body, Floor Head)
• Tangki Air Bersih
• Tangki Air Kotor
• Berus Penggelek
• Dok Pengecasan
• Penyesuai Kuasa

Rajah 2.1: The SUNSMAI S12 Wet Dry Vacuum Cleaner. This image displays the complete assembly of the vacuum cleaner, including the handle, main body with water tanks, and the floor head with the roller brush.

Rajah 2.2: Dimensions of the SUNSMAI S12 Wet Dry Vacuum. The vacuum measures approximately 11.02 inches in length, 11.81 inches in width, and 45.27 inches in height.

Rajah 2.3: The roller brush component of the SUNSMAI S12. This brush is designed for effective cleaning of various hard floor surfaces.

3. Persediaan

3.1 Perhimpunan

1. Masukkan pemegang ke dalam badan utama sehingga ia berbunyi klik dengan selamat pada tempatnya.
2. Pastikan tangki air bersih dan tangki air kotor diletakkan dengan betul pada kedudukan masing-masing.
3. Verify the roller brush is properly installed in the floor head.

3.2 Pengecasan Awal

Before first use, fully charge the appliance. Place the vacuum on the charging dock and connect the power adapter to a wall outlet. The battery indicator will show charging status.

3.3 Mengisi Tangki Air Bersih

1. Keluarkan tangki air bersih dari unit utama.
2. Open the tank cap and fill with clean tap water. For enhanced cleaning, a small amount of non-foaming floor cleaning solution designed for wet vacuums can be added. Do not exceed the MAX fill line.
3. Securely close the cap and reinsert the tank into the main unit until it clicks.

4. Arahan Operasi

4.1 Menghidupkan/Mematikan

• Untuk menghidupkan: Tekan butang Kuasa yang terletak pada pemegang.
• Untuk mematikan: Tekan butang Kuasa sekali lagi.

4.2 Mod Pembersihan

The S12 operates in a combined wet and dry cleaning mode, simultaneously vacuuming debris and mopping the floor. The voice assistant will provide real-time updates on tank levels and operational status.

4.3 Petua Pembersihan

• For best results, move the vacuum at a moderate pace.
• For stubborn messes, allow the vacuum to sit over the mess for a few seconds to allow the water to loosen it, then slowly pass over it.
• Ensure the dirty water tank is emptied regularly to maintain optimal suction and prevent odors.
• The flexible roller brush is designed to adapt to various hard floor surfaces, including hardwood and tiles.

5. Penyelenggaraan

5.1 Fungsi Pembersihan Kendiri

After each use, it is recommended to activate the self-cleaning function:

1. Place the vacuum on the charging dock.
2. Pastikan tangki air bersih mempunyai air yang mencukupi.
3. Press the Self-Clean button (usually indicated by a water droplet icon). The vacuum will perform a cleaning cycle for the roller brush and internal pathways.
4. Empty the dirty water tank immediately after the self-cleaning cycle is complete.

5.2 Mengosongkan dan Membersihkan Tangki Air Kotor

The dirty water tank should be emptied and rinsed after every use to prevent odors and maintain hygiene.

1. Keluarkan tangki air kotor dari unit utama.
2. Buka penutup tangki dan tuangkan air kotor.
3. Bilas tangki dengan teliti dengan air bersih.
4. Clean the filter located within the dirty water tank. Allow all parts to air dry completely before reassembling.

5.3 Membersihkan Berus Penggelek

Even with the self-cleaning function, occasional manual cleaning of the roller brush may be necessary.

1. Turn off the vacuum and remove the dirty water tank.
2. Open the roller brush cover on the floor head.
3. Tanggalkan berus roller.
4. Remove any hair or debris tangled around the brush. Rinse the brush under running water.
5. Benarkan berus penggelek kering sepenuhnya sebelum memasang semula.

6. Penyelesaian masalah

7. Spesifikasi

8. Waranti dan Sokongan Pelanggan

For warranty information, product registration, or technical support, please refer to the warranty card included with your purchase or visit the official SUNSMAI website. You may also contact SUNSMAI customer service directly for assistance with any issues or questions regarding your S12 Wet Dry Vacuum.

Sokongan dalam talian: Visit the SUNSMAI Store on Amazon