deli EDL-DP04-E3B1

deli 4V Cordless Electric Screwdriver

Model: EDL-DP04-E3B1

pengenalan

Thank you for choosing the deli 4V Cordless Electric Screwdriver. This powerful and versatile tool is designed for various tasks, including light fixtures, home furnishings, electronics, and general repairs. Featuring a 3.6V rechargeable battery with a 1500mAh capacity, USB-C charging, and a high 5 N.m torque, this screwdriver offers efficiency and convenience for everyday use. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting. Please read it thoroughly before using the product.

Arahan Keselamatan

Sentiasa ikuti langkah berjaga-jaga keselamatan asas apabila menggunakan alatan elektrik untuk mengurangkan risiko kebakaran, renjatan elektrik dan kecederaan diri.

  • Pastikan Kawasan Kerja Bersih: Kawasan bersepah mengundang kecederaan.
  • Elakkan Persekitaran Berbahaya: Jangan gunakan alatan kuasa dalam damp atau lokasi basah, atau mendedahkannya kepada hujan. Pastikan kawasan kerja tetap terang.
  • Jauhkan Kanak-kanak: Semua pelawat hendaklah berada pada jarak yang selamat dari kawasan kerja.
  • Berpakaian dengan betul: Do not wear loose clothing or jewelry. They can be caught in moving parts. Wear non-slip footwear. Wear hair covering to contain long hair.
  • Pakai Pelindung Mata: Sentiasa memakai cermin mata keselamatan.
  • Kerja Selamat: Gunakan clamps or a vise to hold work when practical. It's safer than using your hand and frees both hands to operate the tool.
  • Jangan melampaui batas: Pastikan pijakan dan keseimbangan yang betul pada setiap masa.
  • Mengekalkan Alat Dengan Berhati-hati: Pastikan alatan tajam dan bersih untuk prestasi yang lebih baik dan selamat. Ikut arahan untuk pelincir dan menukar aksesori.
  • Alat Putuskan Sambungan: Disconnect the tool from the power source before servicing, when changing accessories, or when not in use.
  • Elakkan Permulaan Tidak Sengaja: Ensure the switch is in the off position before plugging in.
  • Semak bahagian yang rosak: Sebelum menggunakan alat selanjutnya, pelindung atau bahagian lain yang rosak hendaklah diperiksa dengan teliti untuk menentukan ia akan beroperasi dengan betul dan melaksanakan fungsi yang dimaksudkan.
  • Use Correct Accessory: Do not use accessories not specifically designed for this tool.
  • Jangan sekali-kali memaksa alat ini: Ia akan melakukan pekerjaan dengan lebih baik dan selamat pada kadar yang dirancang.

Kandungan Pakej

Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda. Jika ada item yang hilang atau rosak, sila hubungi sokongan pelanggan.

  • deli 5 N.m Power Screwdriver (Model EDL-DP04-E3B1)
  • 10x S2 Alloy Steel Bits
  • 1x 60mm Magnetic Extension Rod
  • 1x Kabel Pengecas USB-A ke USB-C
  • 1x Manual Pengguna
deli Electric Screwdriver with included 10 S2 steel bits and USB-C charging cable

Image: The deli electric screwdriver shown with its complete set of accessories, including the 10 S2 steel bits, magnetic extension rod, and USB-C charging cable.

Produk Selesaiview

Familiarize yourself with the components and features of your deli electric screwdriver.

Diagram of deli Electric Screwdriver components: Magnetic Chuck, Circular LED Light, Two-Way Start Button, 1500mAh Battery, USB-C Fast Charging, Ergonomics and Minimalist Design

Image: A detailed diagram highlighting the key components of the deli electric screwdriver, including the magnetic chuck, circular LED light, two-way start button, 1500mAh battery, USB-C fast charging port, and its ergonomic design.

  • Chuck Magnetik: Securely holds screwdriver bits.
  • Lampu LED Pekeliling: Illuminates the work area, especially useful in narrow or dimly lit spaces.
  • Two-Way Start Button: Allows for easy forward and reverse rotation with a single control.
  • Bateri 1500mAh: High-capacity lithium-ion battery for extended use.
  • USB-C Fast Charging Port: Antara muka pengecasan yang mudah dan moden.
  • Ergonomic and Minimalist Design: Provides a comfortable and secure grip for safe operation.

Persediaan

1. Charging the Screwdriver

Before first use, fully charge the screwdriver's internal battery.

  1. Locate the USB-C charging port on the bottom of the screwdriver handle.
  2. Connect the provided USB-A to USB-C charging cable to the screwdriver.
  3. Plug the USB-A end of the cable into a compatible USB power adapter (not included), computer USB port, or power bank.
  4. The charging indicator light (if present, typically near the charging port) will illuminate to show charging status. Refer to the indicator behavior for full charge status.
  5. A full charge can power the screwdriver to drive approximately 300 screws.
deli Electric Screwdriver connected to a USB-C charging cable, with examples of compatible power sources like a laptop, wall adapter, and power bank.

Image: The deli electric screwdriver being charged via its USB-C port, demonstrating its compatibility with various USB power sources such as laptops, wall adapters, and power banks.

Dalaman view of deli Electric Screwdriver battery, showing 1500mAh capacity and ability to drive 300 screws on a single charge.

Imej: Ilustrasi view of the screwdriver's internal battery, highlighting its 1500mAh capacity and the capability to drive up to 300 screws per charge.

2. Memasang Bit Pemutar Skru

The screwdriver uses a magnetic chuck for quick and secure bit changes.

  1. Select the appropriate S2 alloy steel bit for your task from the included set.
  2. Insert the hex end of the bit directly into the magnetic chuck at the front of the screwdriver. The magnetic chuck will hold the bit firmly in place.
  3. For hard-to-reach areas, first insert the selected bit into the 60mm magnetic extension rod, then insert the extension rod into the screwdriver's magnetic chuck.
  4. To remove a bit, simply pull it straight out from the chuck.
deli Electric Screwdriver with various S2 steel bits and extension rod laid out, demonstrating the circular LED light.

Image: The deli electric screwdriver positioned next to its assortment of S2 steel bits and the extension rod, illustrating the circular LED light at the front.

Arahan Operasi

1. Powering On and Direction Control

The screwdriver features an innovative two-way start button for intuitive operation.

  • To drive screws (forward rotation), press the "R" (Right/Forward) side of the two-way button.
  • To remove screws (reverse rotation), press the "L" (Left/Reverse) side of the two-way button.
  • Lepaskan butang untuk menghentikan pemutar skru.
Close-up of the deli Electric Screwdriver's two-way start button with 'L' and 'R' indicators.

Imej: Dari dekat view of the screwdriver's yellow two-way start button, clearly marked with 'L' for reverse and 'R' for forward rotation.

2. Menggunakan Lampu LED

The screwdriver is equipped with a circular LED light that automatically illuminates when the screwdriver is in operation.

  • The three LEDs form a ring light strip around the chuck, providing clear visibility of your work area.
  • This feature is particularly useful when working in dimly lit conditions or in confined spaces.
deli Electric Screwdriver with its circular LED light illuminated, demonstrating its use in a narrow space.

Image: The deli electric screwdriver with its circular LED light activated, illustrating how it illuminates the work area, especially in tight or dark spots.

Penyelenggaraan

  • Pembersihan: Regularly wipe the screwdriver body with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquids enter the tool.
  • Penjagaan Bit: Keep the S2 steel bits clean and free from debris. Store them in a dry place to prevent rust. Replace worn or damaged bits to ensure optimal performance and prevent damage to screw heads.
  • Penyimpanan Bateri: If storing the screwdriver for an extended period, ensure the battery is partially charged (around 50%) and store it in a cool, dry place. Avoid storing it in extreme temperatures. Recharge periodically to maintain battery health.
  • Pemeriksaan Am: Periodically check the screwdriver for any signs of damage, loose parts, or wear. Do not operate a damaged tool.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Pemutar skru tidak boleh dihidupkan.Bateri habis.Charge the screwdriver using the provided USB-C cable.
Pemutar skru kekurangan kuasa atau berhenti semasa penggunaan.Cas bateri rendah.Isi semula bateri sepenuhnya.
Bit slips in the chuck.Bit not fully inserted or chuck is dirty.Ensure the bit is fully inserted. Clean the magnetic chuck if necessary.
Screws are stripped or damaged.Incorrect bit size or excessive force.Use the correct bit size for the screw head. Apply appropriate pressure and avoid over-tightening.
Lampu LED tidak menyala.Screwdriver not operating or malfunction.Ensure the screwdriver is powered on. If the issue persists, contact customer support.

Spesifikasi

CiriSpesifikasi
Jenamadeli
Nombor ModelEDL-DP04-E3B1
Voltage4 Volt (DC)
Jenis BateriLitium Ion
Kapasiti Bateri1500 mAh
Max Torque5 Newton Meters (N.m)
Kelajuan Tanpa Beban250 RPM
Saiz Chuck0.25 Inches (Hex)
Port PengecasanUSB-C
bahanAkrilonitril Butadiena Stirena (ABS), Keluli Aloi
Komponen yang Disertakan10 S2 Steel Bits, Magnetic Extension Rod, USB-A to USB-C Charging Cable

Waranti dan Sokongan

Untuk maklumat jaminan atau sokongan teknikal, sila rujuk kad jaminan yang disertakan dengan produk anda atau hubungi pengilang secara langsung. Simpan resit pembelian anda sebagai bukti pembelian.

Manufacturer: deli

For further assistance, you may visit the official deli store online: deli Official Store

© 2026 deli. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.