INGCO Inverter MMA Welding Machine ING-MMA13018 User Manual

1. Pengenalan

Thank you for choosing the INGCO Inverter MMA Welding Machine ING-MMA13018. This manual provides essential information for the safe and effective operation, setup, maintenance, and troubleshooting of your welding machine. Please read this manual thoroughly before use and retain it for future reference.

1.1. Maklumat Keselamatan

Welding operations involve significant risks. Always adhere to the following safety precautions:

• Wear appropriate personal protective equipment (PPE), including a welding helmet with suitable shade, welding gloves, protective clothing, and safety shoes.
• Pastikan pengudaraan yang mencukupi untuk mengelakkan terhidu asap kimpalan.
• Protect bystanders from arc rays and hot metal. Use welding screens if necessary.
• Ensure the work area is free from flammable materials.
• Connect the machine to a properly grounded power supply.
• Jangan kendalikan mesin dalam damp atau keadaan basah.
• Putuskan sambungan kuasa sebelum melakukan sebarang penyelenggaraan atau pelarasan.

2. Produk Lebihview

The INGCO Inverter MMA Welding Machine ING-MMA13018 is a compact and efficient welding unit designed for Manual Metal Arc (MMA) welding. It features IGBT Inverter Technology for stable arc performance and energy efficiency.

Depan view of the INGCO Inverter MMA Welding Machine ING-MMA13018, showing the control panel, output terminals, and carrying strap.

2.1. Ciri-ciri Utama

• IGBT Inverter Technology for stable and efficient welding.
• Compact and portable design with a carrying strap.
• Digital LED display for current settings.
• Adjustable output current from 15A to 130A.
• Supports electrode diameters from 1.6mm to 3.2mm.
• Built-in Anti-stick, Hot Start, and Arc Force functions for improved welding performance.

2.2. Komponen yang Disertakan

Pakej termasuk:

• 1 x Electrode holder with cable
• 1 x Earth clamp dengan kabel
• 1 x Wire brush
• 1 x Welding helmet
• 1 x Portable strap

3. Persediaan

Before operating the welding machine, ensure it is properly set up.

1. Membongkar: Tanggalkan mesin kimpalan dan semua aksesori daripada pembungkusan dengan berhati-hati. Periksa sebarang kerosakan.
2. penempatan: Place the welding machine on a stable, level surface in a well-ventilated area, away from moisture and flammable materials. Ensure there is sufficient space around the machine for air circulation.
3. Sambungkan Earth Clamp: Sambung bumi clamp cable to the negative (-) terminal on the front panel of the welding machine. Secure the earth clamp to the workpiece or a sturdy metal table that is electrically connected to the workpiece. Ensure a good electrical connection.
4. Sambungkan Pemegang Elektrod: Connect the electrode holder cable to the positive (+) terminal on the front panel of the welding machine.
5. Sambungan Kuasa: Ensure the welding machine's power switch is in the OFF position. Connect the power plug to a suitable 1~220-240V, 50/60Hz grounded power outlet.
6. Install Portable Strap: Attach the portable strap to the designated points on the welding machine for easier transport.

4. Arahan Operasi

Follow these steps for safe and effective welding:

1. Hidupkan kuasa: Turn the power switch to the ON position. The LED display will illuminate.
2. Select Electrode: Choose an electrode suitable for your material and welding task. The machine supports electrodes from 1.6mm to 3.2mm.
3. Laraskan Arus: Use the current adjustment knob to set the desired welding current (15A-130A). The digital display will show the selected amperage. Refer to electrode manufacturer guidelines for recommended current settings.
4. Masukkan Elektrod: Securely insert the electrode into the electrode holder.
5. Sediakan untuk Kimpalan: Put on all necessary PPE, including the welding helmet. Ensure your work area is clear and safe.
6. Pukul Lengkungan: Gently tap or scratch the electrode against the workpiece to strike an arc. Once the arc is established, maintain a consistent arc length and travel speed. The Hot Start feature assists in easier arc ignition, and Arc Force helps prevent the electrode from sticking.
7. Kimpalan: Guide the electrode along the joint, maintaining a steady hand and proper angle. The Anti-stick feature will reduce the current if the electrode sticks, making it easier to detach.
8. Kimpalan Selesai: When finished, lift the electrode from the workpiece to break the arc. Turn off the welding machine. Allow the workpiece to cool before handling.

5. Penyelenggaraan

Penyelenggaraan berkala memastikan jangka hayat dan operasi mesin kimpalan anda yang selamat.

• Pembersihan: Periodically clean the machine's exterior with a dry cloth. Use compressed air to blow out dust from the ventilation openings. Ensure the machine is disconnected from power before cleaning.
• Pemeriksaan Kabel: Regularly inspect all cables (power, electrode holder, earth clamp) for cuts, fraying, or damaged insulation. Replace damaged cables immediately.
• Semakan Terminal: Pastikan semua sambungan dan terminal elektrik bersih dan ketat.
• Storan: Store the welding machine in a dry, clean, and dust-free environment when not in use.
• Servis profesional: Untuk pembaikan dalaman atau masalah yang rumit, hubungi kakitangan servis yang berkelayakan. Jangan cuba membuka mesin.asindiri sendiri.

6. Penyelesaian masalah

If you encounter problems, refer to the following common issues and solutions:

If the problem persists after attempting these solutions, contact customer support or a qualified technician.

7. Spesifikasi

Technical specifications for the INGCO Inverter MMA Welding Machine ING-MMA13018:

8. Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please contact your local INGCO dealer or the official INGCO customer service. Keep your purchase receipt as proof of purchase for warranty claims.