Manual Pengguna Monitor Permainan Pixio PX277 OLED MAX 27-inci QHD 240Hz

1. Pengenalan

This manual provides essential information for the safe and efficient operation of your Pixio PX277 OLED MAX 27-inch QHD 240Hz Gaming Monitor. Please read this manual thoroughly before using the product and retain it for future reference. This monitor features a 27-inch WOLED panel, QHD (2560x1440) resolution, a 240Hz refresh rate, and a 0.03ms GTG response time, designed for high-performance gaming and productivity.

2. Maklumat Keselamatan

Observe the following safety precautions to prevent damage to the monitor or injury to yourself.

• Jangan dedahkan monitor kepada hujan, kelembapan atau suhu yang melampau.
• Pastikan pengudaraan yang betul di sekeliling monitor.
• Gunakan hanya penyesuai kuasa yang dibekalkan bersama monitor.
• Elakkan meletakkan objek berat pada kord kuasa.
• Jangan cuba membuka atau membaiki monitor sendiri. Rujuk semua servis kepada kakitangan yang berkelayakan.
• Bersihkan skrin dengan kain lembut dan tidak berbulu. Elakkan menggunakan bahan kimia yang keras.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej produk anda:

• Pixio PX277 OLED MAX Monitor
• Stand Monitor (Asas dan Leher)
• Penyesuai Kuasa dan Kabel Kuasa
• DisplayPort Cable
• USB-B to USB-A Cable (for KVM and USB hub functionality)
• Manual Pengguna (dokumen ini)

4. Monitor Overview

4.1 Depan View

The front of the monitor features the 27-inch WOLED display panel. The Pixio logo is typically located at the bottom center of the bezel.

Rajah 4.1: Depan view of the Pixio PX277 OLED MAX monitor.

4.2 Belakang View dan Pelabuhan

The rear of the monitor houses the input/output ports and the OSD control joystick/buttons. The stand attaches to the VESA mount area.

Rajah 4.2: Belakang view of the monitor with port labels.

Perihalan Pelabuhan:

• Jack fon telinga: Output audio 3.5mm.
• DP 1.4: DisplayPort input for up to 1440p at 240Hz.
• HDMI 2.0 (x2): HDMI inputs for up to 1440p at 144Hz.
• Type-C (65W PD): USB-C input for video (1440p@240Hz), data, and power delivery (up to 65W).
• USB A (Down) (x2): USB 3.0 downstream ports for connecting peripherals.
• USB B (Up): USB 3.0 upstream port to connect to your computer for KVM and USB hub functionality.
• DC: Power input for the external power adapter.

5. Persediaan

5.1 Perhimpunan Berdiri

1. Keluarkan komponen monitor dan berdiri dengan berhati-hati daripada pembungkusan.
2. Pasangkan leher pendirian pada panel monitor menggunakan skru yang disediakan.
3. Pasangkan tapak pendirian pada leher pendirian.
4. Letakkan monitor yang dipasang pada permukaan yang stabil dan rata.

Figure 5.1: Monitor with adjustable stand.

5.2 Menyambung ke Peranti

Connect your computer or console to the monitor using the appropriate cables.

• DisplayPort: For optimal performance (1440p @ 240Hz), connect a DisplayPort cable from your graphics card to the monitor's DP 1.4 port.
• HDMI: Connect an HDMI cable from your device to one of the monitor's HDMI 2.0 ports (supports 1440p @ 144Hz).
• USB-C: For compatible devices, connect a USB-C cable to the monitor's Type-C port for video (1440p @ 240Hz), data, and up to 65W power delivery.
• USB Huluan: Connect the USB-B to USB-A cable from the monitor's USB B (Up) port to your computer's USB-A port to enable the monitor's USB hub and KVM functionality.
• Kuasa: Connect the power adapter to the monitor's DC input and then plug it into a power outlet.

5.3 Kefungsian Suis KVM

The built-in KVM switch allows you to control two devices (e.g., a PC and a laptop) with a single keyboard and mouse connected to the monitor's USB A (Down) ports. To use KVM:

1. Connect your keyboard and mouse to the USB A (Down) ports on the monitor.
2. Connect the monitor's USB B (Up) port to your primary device (e.g., PC) using the USB-B to USB-A cable.
3. Connect your secondary device (e.g., laptop) to the monitor via the USB-C port. This single USB-C cable will handle video, data, and power for the laptop, enabling KVM control.
4. Switch between devices using the OSD menu or a dedicated hotkey (refer to OSD section for details).

Figure 5.2: KVM switch connectivity example.

Figure 5.3: USB-C connection for display, data, and charging.

6. Arahan Operasi

6.1 Navigasi Menu OSD (Paparan Pada Skrin).

The monitor's settings are controlled via an OSD menu, typically accessed and navigated using a joystick or buttons located on the rear of the monitor.

Figure 6.1: OSD Menu Interface.

Common OSD Menu Categories:

• paparan: Adjust brightness, contrast, sharpness, and other image parameters.
• warna: Fine-tune color temperature, gamma, and color space settings.
• Persediaan Permainan: Configure gaming-specific features such as Adaptive Sync, response time overdrive, and on-screen crosshairs.
• Tetapan Lanjutan: Access OLED Panel Care options, HDR settings, and KVM switching.
• Input: Manually select the input source (DisplayPort, HDMI 1, HDMI 2, USB-C).
• Persediaan Sistem: General monitor settings like language, OSD timeout, and factory reset.

6.2 Ciri dan Tetapan Utama

• Penyegerakan Adaptif: This technology synchronizes the monitor's refresh rate with your graphics card's frame rate to eliminate screen tearing and stuttering. Enable this in the OSD's 'Gaming Setup' menu for a smoother gaming experience.
  

  Rajah 6.2: Penyegerakan Adaptif dalam tindakan.

• HDR (Julat Dinamik Tinggi): The monitor supports HDR for enhanced contrast and color vibrancy. Enable HDR in your operating system settings and the monitor's OSD for compatible content.
• Suis KVM: As detailed in Section 5.3, use the OSD to switch control between connected devices when using the KVM feature.
• OLED Panel Care: To maintain the longevity and performance of the OLED panel, the monitor includes features like Screen Care, Deep Care, and Screensaver. These can be configured in the 'Advanced Settings' menu. It is recommended to allow these functions to run periodically.
  

  Figure 6.3: OLED Panel Care settings in OSD.

• Pendirian boleh laras: The monitor stand offers height adjustment, tilt, swivel, and pivot (90-degree rotation) for ergonomic viewing. Adjust the monitor to your preferred position for comfort.
  

  Figure 6.4: Adjustable stand features.

7. Penyelenggaraan

7.1 Membersihkan Monitor

• Sentiasa cabut plag monitor dari salur keluar kuasa sebelum membersihkan.
• Gunakan kain lembut, kering dan tidak berbulu untuk mengelap skrin dan permukaan luar dengan lembut.
• Untuk tanda degil, ringankan dampen kain dengan air atau pembersih skrin yang lembut dan tidak melelas. Jangan sembur cecair terus ke skrin.
• Avoid using alcohol, ammonia, or abrasive cleaners, as they can damage the screen or casing.

7.2 Penjagaan Panel OLED

OLED technology offers superior image quality but requires specific care to prevent potential image retention (burn-in). The monitor includes built-in features to mitigate this:

• Penjagaan Skrin: A pixel refresh function that runs automatically after a certain period of use or when the monitor enters standby.
• Penjagaan mendalam: A more thorough pixel refresh that takes longer to complete. It is recommended to run this periodically.
• Gambar skrin: Activates after a set idle time to prevent static images from remaining on the screen for too long.

It is recommended to enable and allow these features to operate as designed. Avoid displaying static images for extended periods, and utilize screen savers or power-saving modes when not actively using the monitor.

8. Penyelesaian masalah

Jika anda menghadapi masalah dengan monitor anda, rujuk kepada masalah dan penyelesaian biasa berikut:

If the problem persists after attempting these solutions, please contact Pixio customer support.

9. Spesifikasi

10. Waranti dan Sokongan

Pixio products are covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Pixio website for detailed warranty terms and conditions. For technical support, troubleshooting assistance, or service inquiries, please contact Pixio customer support through their official channels.