Pipishell PILF8, PIMF2
Manual Pengguna Pendakap Dinding TV Gerakan Penuh Pipishell
Models: PILF8 (for 37-75 inch TVs) & PIMF2 (for 26-55 inch TVs)
pengenalan
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Pipishell Full Motion TV Wall Mount Brackets. These mounts are designed to securely hold your flat or curved screen television, offering flexible viewing angles. Please read this manual thoroughly before installation and keep it for future reference.
Imej: Selesaiview of Pipishell Full Motion TV Wall Mounts, including models for both smaller and larger televisions.
Maklumat Keselamatan
AMARAN: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.
- Do not install on drywall alone. Ensure the mount is secured to a solid wood stud, concrete, or brick wall.
- Verify your TV's VESA pattern, weight, and size are within the mount's specifications.
- Use only the provided hardware. Do not use damaged or missing parts.
- Sentiasa adakan sekurang-kurangnya dua orang untuk pemasangan, terutamanya semasa mengangkat TV.
- Ensure all screws are tightened securely but do not overtighten.
Senarai Bahagian
Before installation, ensure all parts are present and undamaged. Refer to your specific model's packaging for a complete list of included hardware.
Image: Included components for the PILF8 model, showing the main mount assembly, TV attachment rails, cable management ties, and a bubble level.
Image: Included components for the PIMF2 model, showing the main mount assembly and TV attachment rails.
Komponen Utama:
- Wall Plate Assembly (with articulating arms)
- TV Bracket Rails
- Various Screws, Washers, and Spacers for TV and Wall Attachment
- Concrete Anchors (for concrete/brick wall installation)
- Pengikat Kabel
- Tahap Buih
- Anti-Drop End Caps (PILF8)
- Security Screws (PILF8)
Spesifikasi
| Ciri | PILF8 (37-75 Inch) | PIMF2 (26-55 Inch) |
|---|---|---|
| Jenis Pemasangan | Lekap di dinding | |
| Jenis Pergerakan | Mengartikulasikan, Berpusing, Condongkan | |
| bahan | Keluli Aloi | |
| Compatible TV Size Range | 37" - 75" | 26" - 55" |
| Kapasiti Berat Maksimum | 100 paun (45.3 kg) | 66 paun (30 kg) |
| Keserasian VESA | 200x100mm hingga 600x400mm | 75x75mm hingga 400x400mm |
| Sudut Kecondongan | +5° / -15° | +5° / -15° |
| Sudut Pusing | +/-45° | +/-90° (max depends on TV size) |
| Sambungan daripada Wall | Retract to 3.2", Extend up to 15.4" | Retract to 2.2", Extend up to 17" |
| Meratakan Selepas Pemasangan | +/-3° | N/A (implied by swivel/tilt) |
| Keserasian Dinding | 16" Max wood studs, concrete, brick | Single wood stud, concrete, brick |
Image: Compatibility check points for your TV and wall type.
Persediaan dan Pemasangan
Alat Diperlukan (Tidak Termasuk):
- Pensel
- Pemutar Skru Kepala Phillips
- Gerudi Elektrik
- Pencari Stud (untuk dinding stud kayu)
- Sepana Soket atau Sepana Boleh Laras
- Tukul (untuk sauh konkrit)
Senarai Semak Prapemasangan:
- Sahkan bahawa berat TV dan corak VESA anda adalah dalam spesifikasi dudukan.
- Identify your wall type (wood stud, solid concrete, or brick). Jangan pasang ke drywall sahaja.
- Locate the desired mounting position, ensuring it is at a comfortable viewing height and away from electrical wires or plumbing.
Langkah Pemasangan:
Image: Simplified 3-step installation process.
- Pasang Kurungan TV pada TV:
Carefully place your TV face down on a soft, clean surface. Align the TV bracket rails with the VESA mounting holes on the back of your TV. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV. Secure the brackets to the TV, ensuring they are level and firmly attached.
Imej: Terperinci view of the PIMF2 mount, highlighting the TV bracket attachment points.
- Lekapkan Plat Dinding ke Dinding:
Determine the exact mounting location. Use a stud finder to locate wood studs if applicable. For concrete or brick walls, mark drill holes directly. Use the wall plate as a template to mark the drill holes. Drill pilot holes according to the recommended drill bit size for your wall type. Secure the wall plate to the wall using the appropriate lag bolts and washers. For concrete/brick, insert concrete anchors before securing the lag bolts. Ensure the wall plate is level using the included bubble level.
Image: Wall compatibility guide for installation.
- Hang TV onto Wall Plate:
With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV brackets are securely seated on the wall plate's arms. Tighten any security screws or locking mechanisms on the TV brackets to prevent accidental dislodgement. Perform post-installation leveling if necessary (for PILF8 model, +/-3° adjustment is available).
Image: Key safety features like security screws and anti-drop end caps.
Operating the TV Mount
Your Pipishell full motion TV mount allows for various adjustments to achieve the optimal viewpengalaman dalam.
- Pusing: Gently push or pull the TV to swivel it left or right. The PILF8 offers +/-45° swivel, while the PIMF2 offers up to +/-90° (depending on TV size).
- Condong: Loosen the tilt adjustment knobs or bolts on the TV brackets, adjust the TV to your desired tilt angle (+5° to -15°), and then re-tighten the knobs/bolts to secure the position.
- Extend/Retract: Pull the TV away from the wall to extend the articulating arms, or push it back towards the wall to retract it. The PILF8 extends up to 15.4 inches and retracts to 3.2 inches. The PIMF2 extends up to 17 inches and retracts to 2.2 inches.
Image: Demonstrating the swivel function for comfortable viewsudut-sudut.
Image: Demonstrating the extension and retraction capabilities of the mount.
Image: Full range of motion for the PIMF2 mount, including extension, tilt, and swivel.
Penyelenggaraan
Penyelenggaraan berkala memastikan ketahanan dan operasi yang selamat pada dudukan TV anda.
- Periodically check all screws and bolts to ensure they remain securely tightened.
- Bersihkan pelekap dengan kain lembut dan kering. Elakkan pembersih atau pelarut yang melelas.
- If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints (avoiding contact with the TV or wall).
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| TV tidak paras selepas pemasangan. | Wall plate not level, or TV not adjusted. | For PILF8, use the +/-3° post-installation leveling feature. For PIMF2, re-adjust the TV on the brackets or re-level the wall plate. |
| Gunung terasa longgar atau goyah. | Screws not fully tightened, or incorrect wall anchors used. | Ensure all wall plate and TV bracket screws are securely tightened. Verify correct anchors were used for your wall type. If issue persists, consult a professional. |
| Kesukaran memusing atau menyengetkan TV. | Joints are stiff or overtightened. | Check if any tilt knobs are overtightened. Apply a small amount of silicone lubricant to the articulating joints if necessary. |
| TV tidak sesuai dengan pelekap. | Incorrect VESA pattern or TV weight/size. | Verify your TV's VESA pattern and weight against the mount's specifications. If incompatible, the mount cannot be used. |
Waranti dan Sokongan
For warranty information or technical support, please contact Pipishell customer service through their official website or the retailer where the product was purchased. Please have your product model (PILF8 or PIMF2) and purchase details ready when contacting support.
You can visit the Pipishell Store for more information: Kedai Pipishell di Amazon
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.