Hikvision DS-2CD1043G2-LIU 4MP PoE IP Bullet Security Camera User Manual

pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Hikvision DS-2CD1043G2-LIU 4MP PoE IP Bullet Security Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation. Keep this manual for future reference.

Maklumat Keselamatan

Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons. This includes, but is not limited to:

• Ensure the power source meets the camera's requirements (12V DC or PoE).
• Jangan dedahkan kamera kepada suhu, kelembapan atau persekitaran yang menghakis yang melampau.
• Avoid direct exposure of the lens to strong light sources.
• Pemasangan hendaklah dilakukan oleh pegawai yang berkelayakan.
• Disconnect power before any maintenance or installation procedures.

Kandungan Pakej

Sahkan bahawa semua komponen terdapat dalam pakej:

• Hikvision DS-2CD1043G2-LIU IP Bullet Camera
• Memasang skru dan palam dinding
• Waterproof connector for network cable
• Quick Start Guide (this document serves as a detailed manual)
• Templat gerudi

Produk Selesaiview

The Hikvision DS-2CD1043G2-LIU is a 4MP PoE IP bullet camera designed for outdoor surveillance. It features a 2.8mm fixed lens, IP67 weather resistance, and Night Color technology for enhanced low-light performance.

Rajah 1: Sisi view of the Hikvision DS-2CD1043G2-LIU camera with mounting bracket.

Rajah 2: Depan view of the camera lens and sensor area.

Komponen Utama:

• Kanta: 2.8mm fixed lens for wide-angle viewing.
• IR/White Light LEDs: For night vision and supplemental lighting.
• mikrofon: Untuk input audio.
• Network Interface (RJ45): Supports Power over Ethernet (PoE) and data transmission.
• Input Kuasa: 12V DC power connector (if not using PoE).
• Pendakap Pelekap: Adjustable for various installation angles.

Persediaan

1. Pemasangan Fizikal

1. Pilih Lokasi Pemasangan: Pilih lokasi luar yang sesuai yang menyediakan keperluan viewing angle and is within reach of network cabling. Ensure the surface is strong enough to support the camera.
2. Lubang gerudi: Use the provided drill template to mark and drill pilot holes for the mounting screws.
3. Selamatkan Kamera: Attach the camera's mounting bracket to the wall or ceiling using the supplied screws and wall plugs.
4. Laraskan Sudut: Loosen the adjustment screws on the bracket to set the desired camera angle, then tighten them securely.

2. Rangkaian dan Sambungan Kuasa

The camera supports Power over Ethernet (PoE) for simplified installation, or a 12V DC power adapter (sold separately).

• Sambungan PoE: Connect an Ethernet cable from a PoE-enabled switch or NVR directly to the camera's RJ45 port. Use the waterproof connector to protect the connection if installed outdoors.
• 12V DC Power (Alternative): If not using PoE, connect a 12V DC power adapter to the camera's power input port and an Ethernet cable to the RJ45 port for data.

3. Konfigurasi Awal

1. Install SADP Tool: Download and install the Hikvision SADP (Search Active Devices Protocol) tool from the official Hikvision website on a computer connected to the same network as the camera.
2. Activate Camera: Run the SADP tool. It will detect the camera. Select the camera and set a strong password to activate it.
3. Konfigurasikan Tetapan Rangkaian: Assign a static IP address or enable DHCP for the camera. Ensure the IP address is compatible with your network.
4. Akses melalui Web pelayar: Buka a web browser (e.g., Internet Explorer, Chrome) and enter the camera's IP address. Log in with the activated password to access the camera's web interface for further configuration.

Beroperasi

Langsung View dan Rakaman

• Web Antara muka: After logging in, navigate to the "Live View" section to see the real-time video feed.
• NVR/DVR: If connected to a Hikvision NVR/DVR, the camera feed will be accessible through the recorder's interface.
• Rakaman: Configure recording schedules, motion-triggered recording, or continuous recording via the web interface or NVR/DVR settings.

Ciri Lanjutan

• Pengesanan Pergerakan: Set up motion detection zones and sensitivity. Configure actions such as recording, sending notifications, or triggering alarms.
• Night Vision (Night Color): The camera automatically switches to Night Color mode in low-light conditions, providing enhanced color images.
• Audio: Enable and configure audio input/output settings if supported and connected.
• Tetapan Imej: Adjust brightness, contrast, saturation, and other image parameters to optimize video quality.

Penyelenggaraan

• Pembersihan: Regularly clean the camera lens with a soft, dry cloth. Do not use harsh detergents or abrasive materials.
• Kemas kini Firmware: Check the official Hikvision website periodically for firmware updates. Always follow the provided instructions carefully when updating firmware to avoid damaging the device.
• Pemeriksaan Kabel: Periodically inspect all cables and connections for wear, damage, or corrosion, especially for outdoor installations.

Menyelesaikan masalah

Spesifikasi

Waranti

This Hikvision product comes with a Waranti pengilang selama 2 tahun. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

For detailed warranty terms and conditions, please refer to the official Hikvision warranty policy available on their webtapak atau hubungi sokongan pelanggan.

Sokongan

For technical assistance, product inquiries, or further support, please visit the official Hikvision website or contact their customer service department. You can typically find support resources, FAQs, and contact information on their global or regional webtapak.

Hikvision Official Webtapak: www.hikvision.com