Redodo 29.2V 20A

Redodo 29.2V 20A LiFePO4 Battery Charger Instruction Manual

pengenalan

This manual provides comprehensive instructions for the Redodo 29.2V 20A LiFePO4 Battery Charger. Designed for 24V Lithium Iron Phosphate (LiFePO4) batteries, this charger offers efficient and safe charging with advanced protection features. Please read this manual thoroughly before use to ensure proper operation and longevity of your battery and charger.

Maklumat Keselamatan

  • Always connect the charger to the battery before connecting to AC power.
  • Ensure the charger's voltage and current ratings match your battery specifications.
  • Do not charge non-LiFePO4 batteries with this charger.
  • Beroperasi di kawasan pengudaraan yang baik.
  • Elakkan litar pintas terminal output.
  • Jauhkan daripada air, lembapan dan bahan mudah terbakar.
  • Jangan buka atau ubah suai pengecas.
  • In case of abnormal operation, disconnect from power immediately.

Produk Selesaiview dan Isi Pakej

The Redodo 29.2V 20A LiFePO4 Battery Charger is designed for efficient and safe charging of 24V LiFePO4 batteries. It features a robust design and multiple protection functions.

Redodo 29.2V 20A LiFePO4 Battery Charger and accessories

Imej: Contents of the Redodo 29.2V 20A LiFePO4 Battery Charger package, including the charger unit, AC power cord, instruction manual, and Anderson connector with M8 screws and insulating caps.

Apa yang ada di dalam Kotak:

  • Redodo 29.2V 20A LiFePO4 Battery Charger
  • Kord Kuasa AC
  • Manual Pengguna
  • Anderson Connector with M8 Size Screws and Insulating Caps

Ciri-ciri

  • Pengecasan Cepat: Delivers 20A output, significantly reducing charging time for large capacity 24V LiFePO4 batteries. For example, a 24V 100Ah battery can be fully charged in approximately 5 hours.
  • Safety Protection Functions: Equipped with multiple safeguards including over temperature protection, output short-circuit protection, reverse polarity connection protection, and output over-voltage perlindungan.
  • Exclusive Pre-charge Mode: Activates deeply discharged or long-unused batteries, extending their lifespan.
  • Kebolehpercayaan yang tinggi: Constructed with military and industrial-grade components and advanced circuit design for durability and low failure rate.
Comparison of Redodo 29.2V 20A charger with other 20A chargers showing faster charging time

Imej: A graphic illustrating the Redodo 29.2V 20A charger's fast charging capability, showing it charges a battery to 100% in 5 hours compared to other 20A chargers taking longer.

Redodo charger connected to a battery, with icons for safety features

Imej: An illustration showing the Redodo charger connected to a battery, highlighting its multiple safety protection functions: output short circuit protection, high temperature protection, output over-voltage protection, and reverse polarity connection protection.

Redodo charger activating a dead battery from BMS protection

Imej: A diagram demonstrating the exclusive pre-charge mode, showing the charger activating a dead battery (0V in protection state) and gradually increasing its voltage towards a fully charged state (26.66V).

Spesifikasi

CiriSpesifikasi
Dimensi Produk4.73 x 8.76 x 2.76 inci (120 x 222.5 x 70 mm)
Berat Barang5.5 paun (2.5 kg)
Input Voltage100-240V AC
Keluaran Voltage29.2V DC
Arus Keluaran20A
KeserasianBateri LiFePO24 4V

Persediaan dan Sambungan

Follow these steps to properly connect your Redodo LiFePO4 Battery Charger:

  1. Sediakan Bateri: Ensure your 24V LiFePO4 battery is in a stable location and its terminals are clean.
  2. Sambung ke Bateri: Connect the DC output cable of the charger to the battery terminals. Ensure correct polarity: red to positive (+), black to negative (-). If using the Anderson connector, ensure it is securely attached.
  3. Sambungkan ke Kuasa AC: Plug the AC input cable into the charger, then plug the other end into a standard 100-240V AC power outlet.
  4. Sahkan Sambungan: Check the LED indicators on the charger to confirm proper connection and charging status.
Redodo 29.2V 20A LiFePO4 Battery Charger connected to a 25.6V 100Ah LiFePO4 battery

Imej: The Redodo 29.2V 20A LiFePO4 Battery Charger connected to a Redodo 25.6V 100Ah LiFePO4 battery, illustrating the connection points and the compact size of the charger.

Arahan Operasi

The charger operates automatically once connected. Observe the LED indicators for charging status:

Redodo 29.2V 20A LiFePO4 Battery Charger with LED indicators

Imej: Close-up of the Redodo 29.2V 20A LiFePO4 Battery Charger showing its plaggable connection and the LED indicator panel with labels for 'Fully Charged', 'Standby', 'Charging', and 'Fault'.

Status Penunjuk LED:

  • Hijau (Pepejal): Bateri dicas penuh.
  • Hijau (berkelip): Charger is in standby mode.
  • Merah (Pepejal): Bateri sedang dicas.
  • Merah (berkelip): Charger malfunction or protection function activated.

Charging Process (Three Stages):

  1. Pra-cas Stage (T1): The charger trickles current to activate a protected or deeply discharged battery, preparing it for the main charging cycle and extending its service life.
  2. Arus Malar (CC) Stage (T2): The charger delivers a constant current of 20A to the battery until it reaches a predetermined voltagtahap e.
  3. Pemalar Voltage (CV) Stage (T3): Sebaik sahaja bateri voltage reaches the target, the charger maintains a constant voltage while gradually reducing the charging current to prevent overcharging until the battery is fully charged.

Penyelenggaraan

  • Pastikan pengecas bersih dan bebas daripada habuk dan serpihan.
  • Store the charger in a dry, cool place when not in use.
  • Regularly inspect cables and connectors for any signs of damage.
  • Do not block the ventilation openings on the charger.

Menyelesaikan masalah

MasalahKemungkinan PuncaPenyelesaian
Pengecas tidak dihidupkanNo AC power; loose connections; faulty outlet.Check AC power source and connections. Try a different outlet.
Red LED flashing (Fault)Reverse polarity; short circuit; over-voltage; over-temperature.Disconnect from power. Check battery connections for correct polarity. Inspect cables for damage. Allow charger to cool if hot.
Bateri tidak dicasIncorrect battery type; battery deeply discharged (0V); poor connection.Ensure battery is 24V LiFePO4. The pre-charge mode should activate 0V batteries. Recheck all connections.

Video Produk Rasmi

Video: An unboxing and initial impression video for the Redodo 12V 100Ah LiFePO4 Battery and 20A Charger. This video showcases the physical product and its components.

Waranti dan Sokongan

Redodo offers a quality guarantee and high reliability for its products. All lithium battery chargers come with 24-hour one-on-one customer service and lifetime technical support.

For any questions or assistance, please contact Redodo customer service. You can also visit the official Redodo store for more information: Redodo Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.