Kensington MY430 EQ Rechargeable Mouse User Manual

pengenalan

The Kensington MY430 EQ Rechargeable Mouse is designed for professionals seeking productivity and convenience with a focus on sustainability. This multi-device mouse offers flexible connectivity options, programmable buttons, and an integrated rechargeable battery. This manual provides instructions for setting up, operating, maintaining, and troubleshooting your MY430 EQ mouse.

Image: The Kensington MY430 EQ Rechargeable Mouse, a black wireless mouse with a sleek design.

Atribut Kelestarian

The MY430 EQ mouse features an outer case composed of a minimum of 56% post-consumer recycled content (PCR), contributing to reduced environmental impact.

Image: A close-up of the MY430 EQ mouse highlighting its sustainability features, including a 'Certified Recycled Content' badge.

Persediaan

Apa yang ada dalam Kotak

• Tetikus Boleh Dicas Semula Kensington MY430 EQ
• Kabel Pengecas USB-C
• Penerima USB 2.4GHz

Mengecas Tetikus

Before initial use, fully charge your MY430 EQ mouse. Connect the included USB-C charging cable to the mouse's charging port and to a USB power source. The LED indicator on the mouse will show charging status. A full charge provides up to 4 months of battery life.

Image: The MY430 EQ mouse connected to its USB-C charging cable, illustrating the charging process and highlighting its long-lasting rechargeable battery.

Pilihan Kesambungan

The MY430 EQ mouse supports connection to up to three active devices: two via Bluetooth Low Energy (LE) and one via the 2.4GHz USB receiver. It is compatible with Windows, macOS, and ChromeOS.

Image: The MY430 EQ mouse demonstrating its multiple connectivity options, including Bluetooth, 2.4GHz USB receiver, and compatibility with Windows, macOS, and ChromeOS.

2.4GHz USB Receiver Connection

1. Locate the 2.4GHz USB receiver, typically stored within the mouse's battery compartment or a dedicated slot.
2. Palamkan penerima USB ke dalam port USB yang tersedia pada komputer anda.
3. Hidupkan tetikus. Tetikus sepatutnya bersambung secara automatik ke penerima.

Bluetooth Connection (Device 1 & Device 2)

1. Hidupkan tetikus.
2. Press and hold the Bluetooth pairing button (refer to the mouse diagram for location) until the LED indicator flashes, indicating pairing mode.
3. On your device (computer, tablet), go to Bluetooth settings and search for new devices.
4. Select "Kensington MY430 EQ" from the list of available devices to pair.
5. Repeat steps 2-4 to pair a second device via Bluetooth.

Mengendalikan Tetikus

Fungsi Asas

• Klik Kiri: Pemilihan dan pengaktifan utama.
• Klik kanan: Mengakses menu kontekstual.
• Roda Tatal: Menatal dokumen dan web halaman. Boleh juga berfungsi sebagai butang klik tengah.

Image: A hand demonstrating the natural grip and operation of the MY430 EQ mouse.

Pelarasan DPI

The MY430 EQ mouse offers multiple DPI (Dots Per Inch) settings to adjust cursor sensitivity: 1000, 1600, and 2400 DPI. Press the DPI button (located near the scroll wheel) to cycle through these settings. The LED indicator may briefly change color or flash to indicate the current DPI level.

Butang Boleh Aturcara

The MY430 EQ features 5 programmable buttons (Left, Right, Forward, Back, Scroll/Middle Click, and DPI Buttons). To customize these buttons for enhanced productivity, download and install the free KensingtonWorks™ software from the official Kensington website. The software allows you to assign various functions, macros, and shortcuts to each button.

Bertukar Antara Peranti

To switch between connected devices (2.4GHz USB receiver, Bluetooth Device 1, Bluetooth Device 2), use the device selection button on the mouse. Press the button to cycle through the connected channels. The corresponding LED indicator will illuminate to show the active connection.

Penyelenggaraan

Membersihkan Tetikus

• Disconnect the mouse from all devices and turn it off before cleaning.
• Gunakan kain lembut yang tidak berbulu dampdisapu dengan air atau pembersih yang lembut dan tidak melelas.
• Avoid getting moisture into any openings. Do not use harsh chemicals or abrasive materials.

Penjagaan Bateri

• To maximize battery lifespan, avoid fully discharging the mouse frequently.
• Simpan tetikus di tempat yang sejuk dan kering apabila tidak digunakan untuk tempoh yang lama.
• Gunakan hanya kabel USB-C yang disediakan untuk mengecas.

Menyelesaikan masalah

Tetikus Tidak Membalas

• Periksa Bateri: Ensure the mouse is charged. Connect it to the USB-C cable and allow it to charge for a few minutes.
• Suis kuasa: Verify the mouse is turned on.
• Ketersambungan: Ensure the correct connection mode (2.4GHz or Bluetooth) is selected on the mouse and your device.
• Penerima USB: If using 2.4GHz, try plugging the USB receiver into a different USB port on your computer.
• Pairing Bluetooth: If using Bluetooth, re-pair the mouse with your device.

Cursor Erratic or Lagging

• permukaan: Ensure you are using the mouse on a clean, non-reflective, and uniform surface.
• Gangguan: Move the mouse closer to the receiver or Bluetooth-enabled device. Avoid using it near other wireless devices that might cause interference.
• Tetapan DPI: Adjust the DPI setting to see if a different sensitivity improves performance.

KensingtonWorks Software Issues

• Pemasangan semula: Try uninstalling and reinstalling the KensingtonWorks software.
• Kemas kini: Check the Kensington website for the latest software version and firmware updates for your mouse.

Spesifikasi

Waranti

The Kensington MY430 EQ Rechargeable Mouse comes with a 3-year warranty. For warranty claims or detailed information regarding terms and conditions, please retain your proof of purchase and contact Kensington customer support.

Sokongan

For additional support, FAQs, software downloads (KensingtonWorks™), or to contact technical assistance, please visit the official Kensington webtapak:

www.kensington.com