Manual Pengguna Mesin Jahit Berkomputer SINGER C5205

1. Pengenalan

Welcome to the SINGER C5205 Computerized Sewing Machine. This advanced machine is designed to enhance your sewing projects with its versatile features and user-friendly interface. It offers 80 built-in stitch patterns, an LCD display for easy selection, and an automatic needle threader for convenience. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance of your machine.

2. Arahan Keselamatan Penting

Apabila menggunakan perkakas elektrik, langkah berjaga-jaga keselamatan asas hendaklah sentiasa dipatuhi, termasuk yang berikut:

• Baca semua arahan sebelum menggunakan mesin jahit ini.
• Simpan arahan ini di tempat yang mudah berhampiran mesin.
• Sentiasa cabut plag mesin jahit dari soket elektrik sebaik sahaja selepas menggunakan dan sebelum membersihkan, menanggalkan penutup atau membuat sebarang pelarasan servis pengguna.
• Jangan biarkan digunakan sebagai mainan. Perhatian perlu dilakukan semasa mesin jahit ini digunakan oleh atau kanak-kanak berhampiran.
• Gunakan produk ini hanya untuk kegunaan yang dimaksudkan seperti yang diterangkan dalam manual ini.
• Jangan sekali-kali mengoperasikan mesin jahit ini jika ia mempunyai kord atau palam yang rosak, jika tidak berfungsi dengan betul, jika ia telah jatuh atau rosak, atau jatuh ke dalam air.
• Jangan sekali-kali menjatuhkan atau memasukkan sebarang objek ke dalam mana-mana bukaan.
• Jangan gunakan di luar rumah.
• Jangan beroperasi di tempat produk aerosol (semburan) digunakan atau di mana oksigen diberikan.

3. Apa yang ada di dalam Kotak

Upon unpacking your SINGER C5205 Computerized Sewing Machine, please ensure all the following components are present:

• 1 Unit Sewing Machine with Accessories
• 1 Unit Foot Controller
• 1 Unit Instruction Manual

4. Komponen Mesin Lebihview

Biasakan diri anda dengan bahagian-bahagian utama mesin jahit anda:

Rajah 4.1: Depan view of the SINGER C5205 Computerized Sewing Machine, highlighting the main body, needle area, and control panel.

Rajah 4.2: The SINGER C5205 machine shown with the included extension table attached, providing a larger work surface for quilting and larger projects.

• Paparan LCD: Shows selected stitch, length, and width settings.
• Butang Pemilihan Jahitan: Navigate and select desired stitch patterns.
• Benang Jarum Automatik: Memudahkan proses memasukkan jarum.
• Pemotong Benang: Conveniently cuts threads after sewing.
• Foot Controller Port: Connects the foot pedal for speed control.
• Jadual Sambungan: Provides an expanded work area for larger fabrics.
• Kaki Penekan: Various feet for different sewing tasks (e.g., all-purpose, zipper, buttonhole).

5. Persediaan Awal

5.1 Sambungan Kuasa

1. Pastikan suis kuasa mesin berada dalam kedudukan OFF.
2. Insert the power cord plug into the machine's power socket.
3. Insert the foot controller plug into the foot controller socket on the machine.
4. Palamkan kord kuasa ke salur keluar elektrik yang sesuai.

5.2 Menggulung Bobbin

1. Letakkan gelendong benang pada pin gelendong.
2. Pandu benang melalui panduan benang atas dan di sekeliling cakera tegangan penggulungan gelendong.
3. Letakkan gelendong kosong pada gelendong penggulung gelendong.
4. Wrap the thread clockwise around the bobbin a few times.
5. Tolak gelendong penggulung gelendong ke kanan.
6. Gently press the foot controller to start winding. Stop when the bobbin is full.
7. Potong benang dan tolak gelendong penggulung gelendong kembali ke kiri.

5.3 Menjahit Benang Atas

1. Naikkan pengangkat kaki penekan.
2. Letakkan gelendong benang pada pin gelendong.
3. Ikut laluan penguliran bernombor yang ditunjukkan pada mesin, pastikan benang melalui semua panduan dan cakera tegangan.
4. Bring the thread down through the needle bar thread guide.
5. Gunakan pemasang benang jarum automatik atau masukkan benang jarum secara manual dari depan ke belakang.

5.4 Memasukkan Bobbin

1. Buka plat penutup gelendong.
2. Masukkan gelendong lilit ke dalam bekas gelendong, pastikan benang terurai ke arah yang betul (biasanya lawan arah jam).
3. Guide the bobbin thread through the tension spring and into the thread guide slot.
4. Tutup plat penutup gelendong.
5. Hold the upper thread, turn the handwheel towards you to lower and raise the needle, catching the bobbin thread. Pull both threads under the presser foot.

6. Arahan Operasi

6.1 Pemilihan Jahitan

Turn on the machine. The LCD display will show the default stitch. Use the stitch selection buttons (usually up/down arrows or a dial) to scroll through the 80 built-in stitch patterns. The display will show the selected stitch number and recommended length/width settings. You can adjust these settings using the dedicated length and width adjustment buttons.

6.2 Jahitan Asas

1. Place your fabric under the presser foot, aligning the edge with a seam guide.
2. Turunkan kaki penekan.
3. Tekan pengawal kaki dengan lembut untuk mula menjahit. Lebih kuat anda menekan, lebih pantas mesin akan menjahit.
4. To secure the beginning and end of a seam, press the reverse stitch button.
5. When finished, raise the needle to its highest position, lift the presser foot, and pull the fabric away.
6. Gunakan pemotong benang terbina dalam untuk memangkas benang.

6.3 Mencipta Lubang Butang

The SINGER C5205 features 6 one-step buttonhole styles.

1. Attach the one-step buttonhole foot.
2. Place the button you intend to use into the buttonhole foot's sizing mechanism.
3. Select the desired buttonhole stitch on the LCD display.
4. Position your fabric and lower the presser foot.
5. Mula menjahit. Mesin akan menjahit lubang butang secara automatik mengikut saiz yang betul.

6.4 Using Different Presser Feet

Your machine comes with 8 specialized presser feet for various applications:

• All-Purpose Foot: For general sewing.
• Zipper Foot: For inserting zippers.
• Buttonhole Foot: For automatic buttonholes.
• Blind Hem Foot: For invisible hems.
• Satin Stitch Foot: For dense decorative stitches.
• Overcasting Foot: For finishing seam edges.
• Roller Foot: For difficult fabrics like leather or vinyl.
• Quilting/Patchwork Foot: For precise seam allowances in quilting.

7. Penyelenggaraan

7.1 Cleaning the Bobbin Area

Lint and dust can accumulate in the bobbin area, affecting stitch quality. Regularly clean this area:

1. Matikan dan cabut plag mesin.
2. Tanggalkan plat jarum dan bekas gelendong.
3. Use a small brush to remove lint and dust from the feed dogs and bobbin area. Do not use compressed air, as it can push lint further into the machine.
4. Reassemble the bobbin case and needle plate.

7.2 Menukar Jarum

A dull or bent needle can cause skipped stitches or thread breakage. Change the needle regularly, especially after 8-10 hours of sewing or when starting a new project.

1. Matikan dan cabut plag mesin.
2. Longgarkan jarum clamp skru.
3. Tanggalkan jarum lama.
4. Masukkan jarum baharu dengan bahagian rata menghadap bahagian belakang mesin, tolak ke atas sejauh yang boleh.
5. Ketatkan jarum clamp skru dengan selamat.

8. Penyelesaian masalah

Rujuk bahagian ini untuk isu biasa dan penyelesaiannya:

9. Spesifikasi

Technical details of the SINGER C5205 Computerized Sewing Machine:

10. Waranti dan Sokongan Pelanggan

Your SINGER C5205 Computerized Sewing Machine comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.

Sokongan Pelanggan

For any assistance, technical support, or service inquiries, please contact SINGER customer support:

Rajah 10.1: SINGER Live Assist contact details for free home and online demo, available Monday to Sunday, 10 AM to 7 PM. Contact number: 1800 103 3474.

• Nombor Bebas Tol: 1800 103 3474
• Hubungan Ganti: 8860118855
• e-mel: customersupport@singerindia.com
• Webtapak: www.singerindia.com
• Waktu Operasi: Monday to Sunday, 10 AM to 7 PM

Manufacturer and Importer Address: Singer India Limited, A-26/4, 2nd Floor, Mohan Cooperative Ind. Estate, New Delhi-110044.