Selve i-R Send 1-Channel Wireless Transmitter User Manual

1. Pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Selve i-R Send 1-Channel Wireless Transmitter. Please read this manual carefully before using the device to ensure proper function and safety.

2. Produk Lebihview

The Selve i-R Send 1-Channel Wireless Transmitter (Model 298713) is an original Selve product designed for controlling Selve tubular motors wirelessly. It features a manual push-button interface for easy operation.

Rajah 2.1: Depan view of the Selve i-R Send 1-Channel Wireless Transmitter. The device is white, rectangular, and features a slider switch for AUTO/MAN (Automatic/Manual) mode, an indicator light, and three large push buttons for Up, Stop, and Down commands. The 'SELVE' brand name is visible at the bottom.

2.1 Ciri Utama:

• 1-channel wireless control for Selve tubular motors.
• Manual push-button operation.
• AUTO/MAN (Automatic/Manual) mode selection.
• Reka bentuk boleh dipasang di dinding.
• Pembinaan plastik tahan lama.

2.2 Kandungan Pakej:

• Selve i-R Send 1-Channel Wireless Transmitter (Model 298713)
• Perkakasan pemasangan (skru, palam dinding) - (Assumed, typical for wall-mount devices)
• Manual Pengguna (dokumen ini)

3. Maklumat Keselamatan

Please observe the following safety instructions to prevent injury or damage to the device:

• Baca semua arahan sebelum pemasangan dan pengendalian.
• Jangan dedahkan peranti kepada kelembapan, suhu melampau atau cahaya matahari langsung.
• Ensure the power supply to the motor is disconnected before installation or maintenance.
• Only use the device for its intended purpose as a wireless transmitter for Selve tubular motors.
• Jauhkan daripada kanak-kanak.
• Jangan cuba membuka atau membaiki peranti ini sendiri. Rujuk kakitangan yang berkelayakan untuk servis.

4. Persediaan dan Pemasangan

4.1 Mounting the Transmitter:

1. Choose a suitable location for mounting, ensuring it is within range of the tubular motor and easily accessible.
2. Mark the drilling points on the wall using the transmitter's mounting plate as a template.
3. Drill holes at the marked points and insert appropriate wall plugs.
4. Pasangkan plat pelekap pada dinding menggunakan skru yang disediakan.
5. Attach the transmitter securely to the mounted plate.

4.2 Pairing with a Tubular Motor:

The pairing process typically involves putting the tubular motor into a programming mode and then sending a signal from the transmitter. Refer to your specific Selve tubular motor's manual for detailed instructions on how to enter programming mode.

1. Ensure the tubular motor is powered on and in programming mode (as per motor's manual).
2. On the Selve i-R Send transmitter, press and hold the programming button (often a small recessed button, refer to specific product diagram if available, or assume it's one of the main buttons used in a sequence). (Note: Specific programming button location not provided in product image, typical for such devices)
3. The motor should respond, indicating successful pairing.
4. Test the Up, Stop, and Down functions to confirm proper operation.

5. Arahan Operasi

The Selve i-R Send transmitter features intuitive controls for managing your tubular motor.

5.1 Fungsi Butang:

• Butang Atas (▲): Press to move the connected motor (e.g., roller shutter, awning) upwards.
• Stop Button (▬): Press to stop the motor's current movement.
• Butang Bawah (▼): Press to move the connected motor downwards.

5.2 AUTO/MAN Mode:

The transmitter includes a slider switch to select between Automatic (AUTO) and Manual (MAN) operation modes.

• Mod AUTO: When the slider is set to AUTO, the transmitter may operate based on pre-programmed timers or sensors connected to the motor system (if applicable). This mode allows for automated control.
• MAN Mode: When the slider is set to MAN, the transmitter operates purely through manual button presses. This mode provides direct control over the motor's movement.

Note: The specific functionality of AUTO mode depends on the capabilities of the connected Selve tubular motor and any integrated smart home systems.

6. Penyelenggaraan

6.1 Pembersihan:

Wipe the transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the plastic surface.

6.2 Penggantian Bateri:

The product image suggests an internal battery or power source. If the indicator light on the transmitter begins to dim or the range decreases, the battery may need replacement. Refer to the specific battery compartment location (usually on the back) and replace with the correct battery type (e.g., CR2032 coin cell or AAA batteries, depending on design). Ensure correct polarity when inserting new batteries.

Note: Battery type and replacement procedure are typical assumptions for wireless transmitters. Specific details are not provided in the product data.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

Specific warranty information for the Selve i-R Send 1-Channel Wireless Transmitter (Model 298713) is not provided in the product data. Please refer to the manufacturer's official weblaman web atau hubungi tempat pembelian anda untuk butiran jaminan dan sokongan pelanggan.

For technical assistance or further inquiries, please contact Selve customer service or an authorized Selve dealer.