1. Pengenalan
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Conentool 21V Cordless Brushless Impact Wrench, Model CW-313. Please read these instructions carefully before using the tool to ensure proper function and to prevent injury.
2. Arahan Keselamatan
Sentiasa ikuti langkah berjaga-jaga keselamatan asas apabila menggunakan alatan elektrik untuk mengurangkan risiko kebakaran, renjatan elektrik dan kecederaan diri.
- Keselamatan Kawasan Kerja: Pastikan kawasan kerja anda bersih dan terang. Kawasan bersepah atau gelap mengundang kemalangan. Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
- Keselamatan Elektrik: Elakkan sentuhan badan dengan permukaan yang dibumikan atau dibumikan. Jangan dedahkan alatan kuasa kepada hujan atau keadaan basah.
- Keselamatan Diri: Sentiasa pakai pelindung mata. Gunakan perlindungan pendengaran apabila beroperasi untuk tempoh yang lama. Berpakaian dengan betul; elakkan pakaian atau barang kemas yang longgar. Selamat rambut panjang.
- Penggunaan dan Penjagaan Alat: Jangan paksa alat kuasa. Gunakan alat kuasa yang betul untuk aplikasi anda. Putuskan sambungan pek bateri daripada alat kuasa sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alatan kuasa.
- Penggunaan dan Penjagaan Pek Bateri: Cas semula hanya dengan pengecas yang ditentukan oleh pengilang. Jangan gunakan pek bateri dengan mana-mana alat kuasa lain.
3. Produk Lebihview
The Conentool CW-313 is a powerful 21V cordless brushless impact wrench designed for efficient tightening and loosening of fasteners. It features a robust brushless motor and a high-capacity battery for extended use.
3.1 Komponen Utama
3.2 Brushless Motor Technology
This impact wrench is equipped with an upgraded pure copper brushless motor, offering enhanced performance and durability compared to brushed motors.
3.3 4.0Ah Large Capacity Battery
The tool is designed to be powered by a 4.0Ah large capacity lithium-ion battery, providing extended working hours and consistent power output.
4. Persediaan
4.1 Pemasangan dan Pembuangan Bateri
- Untuk Memasang: Align the battery pack with the base of the tool handle. Slide the battery pack into the handle until it clicks securely into place. Ensure it is fully seated.
- Untuk Alih Keluar: Press the battery pack release button (refer to Product Overview image PT05) located at the front of the battery. While holding the button, slide the battery pack out of the tool handle.
Note: The battery may be sold separately or included in specific kits. Ensure the battery is fully charged before first use.
4.2 Socket/Bit Installation
The impact wrench features a 1/2-inch chuck for attaching sockets or hex screwdriver bits.
- Untuk Memasang: Push the desired 1/2-inch impact socket or hex screwdriver bit onto the square drive anvil until it locks into place. Pull on the accessory to ensure it is securely attached.
- Untuk Alih Keluar: Pull the accessory firmly off the square drive anvil.
5. Arahan Operasi
5.1 Menghidupkan/Mematikan dan Kelajuan Berubah-ubah
The tool is activated by pressing the variable speed switch. The speed of the tool is controlled by the amount of pressure applied to the switch. Pressing lightly results in lower speed, while pressing fully results in maximum speed (up to 3300 RPM).
5.2 Operasi Hadapan dan Undur
The direction of rotation is controlled by the forward and reverse switch, located above the trigger.
- Forward (Tighten): Push the switch to the right.
- Reverse (Loosen): Push the switch to the left.
- Dikunci: Position the switch in the center to prevent accidental starting. Always engage the lock when not in use or when changing accessories.
5.3 Menggunakan Lampu LED
The built-in LED light automatically illuminates the work area when the trigger is pressed, enhancing visibility in dark or confined spaces.
5.4 Aplikasi Tork
The Conentool CW-313 delivers a maximum torque of 680 N.m (approximately 501.54 ft-lbs), suitable for various applications from tightening screws to tire disassembly and industrial use.
6. Penyelenggaraan
Penyelenggaraan tetap memastikan jangka hayat dan prestasi optimum sepana impak anda.
- Pembersihan: Pastikan bukaan pengudaraan alat bersih dan bebas daripada serpihan untuk mengelakkan terlalu panas. Gunakan yang lembut, damp kain untuk membersihkan bahagian luar. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
- Penjagaan Bateri: Store batteries in a cool, dry place away from direct sunlight. Do not store batteries in a discharged state for extended periods. Recharge batteries regularly, even if not in use, to maintain their health.
- Pemeriksaan: Periodically inspect the chuck for wear or damage. Ensure all screws are tight. If any parts are damaged, have them replaced by a qualified service technician.
7. Penyelesaian masalah
Jika anda menghadapi masalah dengan sepana impak anda, rujuk kepada masalah dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Alat tidak bermula | Battery not charged or improperly installed; Forward/Reverse switch in locked position. | Charge battery fully and ensure it is securely installed. Move the Forward/Reverse switch out of the center (locked) position. |
| Mengurangkan kuasa atau kelajuan | Low battery charge; Overheating; Worn carbon brushes (not applicable for brushless motor, but common for brushed tools). | Cas semula bateri. Benarkan alat menjadi sejuk jika ia telah digunakan secara berterusan. |
| Getaran atau bunyi yang berlebihan | Aksesori longgar; Komponen dalaman rosak. | Ensure the socket/bit is properly seated. If the problem persists, discontinue use and contact customer support. |
8. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Nombor Model | CW-313 |
| Pengeluar | CONENTOOL |
| Sumber Kuasa | Dikuasakan Bateri |
| Voltage | 21 Volt |
| Kelajuan Tanpa Beban | Sehingga 3300 RPM |
| Max Torque | 680 N.m (approx. 501.54 ft-lbs) |
| Saiz Chuck | 1/2 inci |
| Jenis Motor | Tanpa berus |
| Battery Capacity (recommended) | 4.0 Ah Lithium-ion (sold separately or included in specific kits) |
| Dimensi Pakej | 37.5 x 28.4 x 11.4 cm |
| Berat badan | 3.53 kg (termasuk pembungkusan) |
8.1 Aksesori Termasuk
The following accessories are typically included with the Conentool CW-313 impact wrench kit:
- 1 x Electric Wrench (Impact Wrench)
- 6 x Socket Wrenches (Impact Sockets)
- 1 x Screwdriver (Hex Bit Adapter)
- 2 x Circular Circle (Retaining Rings for sockets)
- 2 x Pin (for socket retention)
- 1 x Conversion head (for screwdriver bits)
- 1 x Pengecas
- 1 x Battery (4.0Ah, if included in kit)
- 1 x Carry Case
9. Waranti dan Sokongan
For warranty information, technical support, or to order replacement parts, please refer to the contact information provided at the point of purchase or visit the official Conentool website. Please have your model number (CW-313) and purchase date available when contacting support.