pengenalan
The RunCam Spotter V2 Micro FPV AIO Camera is a compact, all-in-one camera and video transmitter designed for various RC applications, including RC cars, boats, drones, and planes. It features a 700TVL camera with a 170-degree field of view, an integrated microphone, and an On-Screen Display (OSD) for real-time data. The 5.8G video transmitter offers adjustable power output from 20mW to 200mW across 40 channels, ensuring compatibility with standard FPV goggles and monitors.
Kandungan Pakej
- 1x Spotter V2 Micro FPV AIO Camera (with Cloverleaf antenna)
- 1x XT-60 Power Cable
- 1x Double Sided Tape (one side Velcro)
- 1x Spare Whip Antenna
- 1x Manual Pengguna (dokumen ini)
Produk Selesaiview
The Spotter V2 is designed for minimal impact on device performance due to its lightweight and compact form factor. It provides an expansive field of view for an immersive FPV experience.
Image: The RunCam Spotter V2 FPV Camera, demonstrating its compact size and lightweight design, weighing only 9g.
Image: Illustration of the 170-degree wide-angle lens, providing an expansive field of view for enhanced detail in FPV applications.
Image: Detailed dimensions of the Spotter V2 camera, measuring 35x20.5x17.8mm (excluding antenna).
Persediaan
- Sambungan Kuasa: Connect the provided XT-60 power cable to the camera and your power source (2S-4S LiPo battery, 7.4V-14.8V). Ensure correct polarity.
- Pemasangan Antena: The camera comes with a pre-installed Cloverleaf antenna. A spare Whip Antenna is included for replacement if needed. Ensure the antenna is securely attached.
- Pemasangan: Use the double-sided tape (one side Velcro) to securely mount the camera on your RC vehicle. Position the camera to achieve the desired field of view.
- penyejukan: Due to potential heat generation, especially in enclosed spaces, ensure adequate airflow around the camera's heatsink. Consider adding a small cooling fan if mounting inside an RC vehicle without natural ventilation.
- FPV Receiver Connection: The Spotter V2 is compatible with all analog 5.8G FPV goggles and monitors. Refer to your FPV receiver's manual for pairing instructions.
Image: The Spotter V2 camera is broadly compatible with analog FPV goggles and monitors.
Arahan Operasi
- Hidupkan kuasa: Connect the camera to a compatible power source. The camera will power on automatically.
- Channel and Band Selection: The camera features 5 bands and 40 channels. Use the button on the camera to cycle through channels and bands. Refer to the detailed frequency table (usually provided in a separate quick start guide or on the product page) to match your FPV receiver.
- Paparan Pada Skrin (OSD): The integrated OSD provides real-time flight data, such as battery voltage and channel information. This data is overlaid on the video feed.
- Mikrofon Bersepadu: The built-in microphone captures audio, enhancing the immersive FPV experience.
- Penghantaran Video: Once powered on and a channel is selected, the camera will transmit video. Ensure your FPV goggles or monitor are tuned to the same frequency.
Image: The camera's button for frequency adjustment and its heatsink for thermal management.
Penyelenggaraan
- Pembersihan: Keep the camera lens clean using a soft, dry cloth. Avoid abrasive materials or harsh chemicals.
- Pengurusan Terma: Regularly inspect the heatsink for dust or debris. Ensure consistent airflow to prevent overheating, which can degrade video quality and shorten component lifespan.
- Penjagaan Antena: Handle the antenna carefully. If the Cloverleaf antenna is damaged, it can be replaced with the spare Whip Antenna by soldering.
- Storan: Store the camera in a dry, cool environment away from direct sunlight and extreme temperatures.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Distorted or No Video Signal |
|
|
| Camera Gets Excessively Hot |
|
|
| Tiada Audio |
|
|
Spesifikasi
| Ciri | Perincian |
|---|---|
| Kamera | 700 TVL, 170-degree wide-angle lens |
| Resolusi | 1280*960 |
| Resolusi Keluaran Video | 720 piksel |
| Default Video Input | PAL |
| Penghantaran Video | 5.8G, 40CH, 20mW~200mW adjustable |
| Jarak Penghantaran Maksimum | 500 meters / 547 yards |
| Kuasa Input | 2S-4S (7.4V~14.8V) |
| Antena | Cloverleaf and Whip antenna (interchangeable) |
| Pelarasan Kekerapan | Tekan butang |
| Ciri-ciri | Built-in OSD, Integrated Microphone |
| Pencahayaan Minimum | 0.5 LUX |
| Arus Operasi | 80mA |
| Dimensi (L*W*H) | 35*20.5*17.8mm (Antena tidak termasuk) |
| Jumlah Berat | 9g |
| bahan | plastik |
| Tahap Kemahiran | pemula |
Waranti
The RunCam Spotter V2 FPV Camera and Transmitter Kit typically comes with a 1-year limited warranty. For specific warranty terms, conditions, and claim procedures, please refer to the official RunCam weblaman web atau hubungi khidmat pelanggan mereka secara langsung. Simpan bukti pembelian anda untuk pengesahan jaminan.
Sokongan
For further assistance, technical support, or inquiries regarding the RunCam Spotter V2, please visit the official RunCam website or contact their customer service department. Online resources, FAQs, and firmware updates may also be available on their webtapak.
Official RunCam Store: Visit the RunCam Store on Amazon