VacLife Cordless Tire Inflator Portable Air Compressor User Manual

1. Pengenalan

The VacLife Cordless Tire Inflator (Model ATJ-6988) is a portable and versatile air compressor designed for inflating tires on cars, bikes, and other inflatables. Its compact, cordless design makes it convenient for on-the-go use, providing up to 150 PSI pressure. Equipped with a powerful motor, it offers quick and efficient inflation, along with an LED digital display for real-time pressure monitoring and an auto-shutoff feature for safe operation. The integrated LED light enhances usability in low-light conditions.

2. Arahan Keselamatan

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Jauhkan peranti daripada kanak-kanak dan haiwan peliharaan.
• Do not operate the inflator in wet conditions or expose it to rain.
• Ensure the correct pressure setting for the item being inflated to prevent over-inflation and potential bursting.
• Allow the device to rest for at least 10 minutes after every 10 minutes of continuous use to prevent overheating.
• Jangan buka atau ubah suai peranti. Rujuk semua servis kepada kakitangan yang berkelayakan.
• Gunakan hanya kabel pengecas dan sumber kuasa yang serasi yang disediakan.
• The device operates at a noise level of approximately 80 dB. Use hearing protection if sensitive to noise or in prolonged use.
• Buang bateri secara bertanggungjawab mengikut peraturan tempatan.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• VacLife Cordless Tire Inflator Unit
• Hos Udara dengan Penyambung Injap Schrader
• Penyesuai Presta Injap
• Ball Needle Nozzle
• Inflatable Toy Nozzle
• Kabel Pengecasan USB (USB-A hingga USB-C)
• Manual Pengguna (dokumen ini)

4. Produk Lebihview

Figure 4.1: VacLife Cordless Tire Inflator and Included Accessories. The image displays the main inflator unit on the right, featuring a digital display and control buttons. To the left, an air hose, two different cone-shaped nozzles, a ball needle, and a USB charging cable are shown.

4.1 Komponen

• Unit Utama: Houses the motor, battery, display, and controls.
• Hos udara: Connects the inflator to the tire valve.
• muncung: Various adapters for different inflation needs (e.g., car tires, bike tires, sports balls, inflatable toys).
• Port Pengecasan USB: Untuk mengecas semula bateri dalaman.

4.2 Kawalan dan Paparan

• Butang Kuasa (Pusat): Tekan dan tahan untuk menghidupkan/mematikan. Tekan sebentar untuk memulakan/menghentikan pengembungan.
• Butang Mod (M): Cycles through inflation modes (car, motorcycle, bicycle, ball) and pressure units (PSI, BAR, KPA, KG/CM²).
• Butang '+' / '-': Melaraskan nilai tekanan sasaran.
• Light Button (Sun icon): Toggles the LED light modes (Flashlight, Alarm Light, SOS Light).
• Paparan Digital LED: Shows real-time pressure, preset pressure, selected unit, battery level, and inflation mode icons.

5. Persediaan

5.1 Mengecas Peranti

1. Connect the provided USB charging cable to the charging port on the inflator.
2. Sambungkan hujung kabel USB yang satu lagi kepada penyesuai kuasa USB yang serasi (tidak disertakan) atau port USB.
3. The battery indicator on the LED display will show charging status. A full charge typically takes 3-4 hours.
4. Once fully charged, the device can operate continuously for approximately 20 minutes.

5.2 Attaching the Air Hose and Nozzles

1. Screw the air hose securely into the air outlet port on the top of the inflator.
2. Pilih muncung yang sesuai untuk item yang anda ingin tiup.
3. Screw the selected nozzle onto the end of the air hose.

6. Arahan Operasi

6.1 Hidupkan/Mati Kuasa

• To turn on: Press and hold the Power button (center button) for 2-3 seconds until the display illuminates.
• To turn off: Press and hold the Power button for 2-3 seconds. The device will also automatically shut off after a period of inactivity.

6.2 Selecting Pressure Unit and Mode

• After powering on, press the Mode button (M) to cycle through the four available pressure units: PSI, BAR, KPA, and KG/CM².
• Continue pressing the Mode button to select the desired inflation mode (car, motorcycle, bicycle, ball). Each mode may have a default pressure range.

6.3 Menetapkan Tekanan Sasaran

• Once the desired unit and mode are selected, use the '+' and '-' buttons to adjust the target pressure value. The preset pressure will flash on the display.
• Refer to your vehicle's or item's recommended pressure (usually found on a sticker inside the car door, owner's manual, or on the item itself).

6.4 Starting Inflation

1. Connect the air hose (with appropriate nozzle) securely to the valve stem of the item to be inflated. The display will show the current pressure.
2. Press the Power button (center button) once to start inflation. The inflator will begin pumping air, and the real-time pressure will be displayed.
3. The inflator will automatically stop once the preset target pressure is reached. This is the auto-shutoff feature.
4. To manually stop inflation at any time, press the Power button again.
5. Tanggalkan hos udara daripada batang injap.

Example: Inflating a 195/55 R15 car tire from 22 PSI to 36 PSI typically takes approximately 3 minutes. For optimal performance and device longevity, allow the inflator to rest for at least 10 minutes after every 10 minutes of continuous operation.

6.5 Menggunakan Lampu LED

• Press the Light button (sun icon) to cycle through the LED light modes:
• Akhbar Pertama: Activates the constant flashlight mode.
• Akhbar Kedua: Activates the alarm light (slow flashing).
• Akhbar Ketiga: Activates the SOS light (Morse code for SOS).
• Akhbar Keempat: Mematikan lampu LED.

7. Penyelenggaraan

• Pembersihan: Lap bahagian luar peranti dengan lembut, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the device is off and disconnected from power before cleaning.
• Storan: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children.
• Penjagaan Bateri: To prolong battery life, fully charge the device before long-term storage and recharge it every 3-6 months if not in use. Avoid completely draining the battery frequently.
• Penjagaan muncung: Keep nozzles clean and free of debris to ensure proper air flow.

8. Penyelesaian masalah

9. Spesifikasi

10. Waranti dan Sokongan

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or inquiries, please visit the official VacLife webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.