Produk Selesaiview
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the RSAG7.820.10462/ROH Power Supply and Main Board, compatible with HISENSE 58R6E3 (S/N: 58G21) televisions. This part has been tested to ensure functionality.

Imej: The RSAG7.820.10462/ROH Power Supply and Main Board. This image displays the full circuit board, highlighting various components such as USB ports, HDMI ports, audio/video input jacks, power supply capacitors, heat sinks, and the main processor area covered by a black heat spreader. The board is green with various electronic components soldered onto it, including resistors, capacitors, and integrated circuits. Markings like "COLD" and "HOT" indicate different sections of the power supply. A barcode and serial number are visible on the right side of the board.
Maklumat Keselamatan
Always disconnect the television from the power source before attempting any installation or maintenance. Static electricity can damage electronic components; use anti-static precautions (e.g., anti-static wrist strap) when handling the board. If you are unsure about any step, consult a qualified technician.
Persediaan dan Pemasangan
This section outlines the steps for replacing or installing the main board.
- Penyediaan:
- Ensure the television is unplugged from the wall outlet.
- Place the television face down on a soft, clean surface to prevent screen damage.
- Kumpulkan alatan yang diperlukan: Pemutar skru kepala Phillips, tali pergelangan tangan anti-statik.
- Accessing the Main Board:
- Remove the back cover of the television by unscrewing all retaining screws.
- Carefully lift and set aside the back cover.
- Disconnecting the Old Board (if applicable):
- Identify all cables connected to the existing main board (e.g., power cables, ribbon cables, speaker cables, input/output cables).
- Gently disconnect each cable. Note their positions for reassembly.
- Unscrew the main board from the television chassis.
- Carefully remove the old board.
- Memasang Papan Baharu:
- Align the new RSAG7.820.10462/ROH board with the mounting holes in the television chassis.
- Secure the board with the appropriate screws.
- Reconnect all cables, ensuring they are firmly seated in their respective ports. Pay close attention to the orientation of ribbon cables.
- Langkah Akhir:
- Replace the television back cover and secure it with all screws.
- Carefully return the television to its upright position.
- Plug the television into a power outlet.
Arahan Operasi
Once the main board is correctly installed, the television should power on normally. The main board manages all core functions of the television, including video processing, audio output, and input management.
- Hidupkan kuasa: Press the power button on the television or remote control.
- Pemilihan Input: Use the remote control to select the desired input source (HDMI, AV, USB, etc.).
- Semakan Kefungsian: Verify that all ports (HDMI, USB, AV) and functions (picture, sound) are working as expected.
Penyelenggaraan
The RSAG7.820.10462/ROH main board is designed for long-term reliability. Minimal maintenance is required.
- Pembersihan: Keep the television's ventilation openings clear of dust and debris to ensure proper airflow and prevent overheating. Do not use liquid cleaners directly on the board.
- Persekitaran: Operate the television in a well-ventilated area, away from excessive heat, humidity, and direct sunlight.
- Lonjakan Kuasa: Consider using a surge protector to safeguard the television and its internal components from electrical fluctuations.
Menyelesaikan masalah
If you encounter issues after installing the main board, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| No Power / TV Does Not Turn On | Loose power connection, faulty power supply unit (PSU) section on the board, incorrect installation. |
|
| Tiada Gambar / Skrin Hitam | Loose display ribbon cable, incorrect input selection, backlight issue (not directly main board). |
|
| Tiada Bunyi | Loose speaker cables, audio settings, faulty audio circuit on the board. |
|
| Input Ports Not Working (HDMI, USB, AV) | Loose port connections, damaged port, software issue. |
|
Jika langkah-langkah ini tidak menyelesaikan masalah, bantuan profesional mungkin diperlukan.
Spesifikasi
Key specifications for the RSAG7.820.10462/ROH Power Supply and Main Board:
- Nama Model: RSAG7.820.10462
- Peranti Serasi: Television (specifically HISENSE 58R6E3)
- Jenis Penyambung Kuasa Utama: 24-Pin
- Antara Muka Kad Grafik: PCI Express (Note: This refers to internal board architecture, not an external slot)
- Slot Memori Tersedia: 2 (Internal to the board, not user-accessible)
- Bilangan Pelabuhan: 3 (referring to specific types of ports)
- Total Ethernet Ports: 1
- Jumlah Port HDMI: 1
- Total PCI E- Ports: 1 (Internal to the board)
- Pengeluar: ddc
- ASIN: B0CPJSVMMQ
Waranti dan Sokongan
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and duration, please refer to the documentation provided with your purchase or contact the seller directly.
For technical support or assistance with installation and troubleshooting, please contact the seller or manufacturer through the platform where the product was purchased. Provide your product model number (RSAG7.820.10462) and purchase details for faster service.