WZRELB 10000W 24V Pure Sine Wave Split Phase Power Inverter

1. Pengenalan

This manual provides essential information for the safe and efficient operation of your WZRELB 10000W 24V Pure Sine Wave Split Phase Power Inverter. Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Arahan Keselamatan

• Baca Semua Arahan: Before operating the inverter, read all instructions and cautionary markings on the inverter, the batteries, and all appropriate sections of this manual.
• Kakitangan Berkelayakan: Pemasangan dan penyelenggaraan hendaklah hanya dilakukan oleh kakitangan yang berkelayakan.
• Pengudaraan: Ensure adequate ventilation around the inverter. Do not install in a zero-clearance compartment.
• Elakkan Kelembapan: Do not expose the inverter to rain, snow, spray, or bilge water.
• Proper Battery Connection: Connect the inverter to a 24V battery system only. Incorrect voltage can damage the inverter.
• Pembumian: Ensure the inverter is properly grounded to prevent electrical shock.
• Putuskan Sambungan Kecemasan: Know how to quickly disconnect power in an emergency.

3. Kandungan Pakej

Selepas membuka pakej, sahkan bahawa semua komponen ada dan tidak rosak:

• WZRELB 10000W 24V Pure Sine Wave Split Phase Power Inverter
• DC Connection Cables (AWG5 cables, typically 2 black for negative, 2 red for positive)
• Fius
• Manual Pengguna

4. Produk Lebihview

The WZRELB 10000W 24V Pure Sine Wave Split Phase Power Inverter converts 24V DC battery power to 120V/240V AC power. It features a high efficiency design, an LCD display for monitoring, and multiple protection functions.

4.1. Front Panel (AC Output)

Imej: Front panel of the inverter with two 120V AC outlets and hardwire terminals for 120V and 240V output.

• 120VAC Outlets: Two standard 120V AC outlets, each supporting up to 5000W.
• 240VAC Hardwire Terminal (3-wire): For 240V AC output, up to 10KW max (L+N=240V).
• Multi-mode Hardwire Terminal (4-wire): Supports L1+L2=240V, L1+N=120V, L2+N=120V, allowing simultaneous 120VAC and 240VAC output.
• Suis kuasa: To turn the AC output on or off.
• Ground Wire Connector: Untuk pembumian keselamatan.

4.2. Rear Panel (DC Input)

Imej: Rear panel of the inverter, featuring positive and negative DC input terminals and cooling fans.

• Positive (+) Terminal: Red terminal for positive battery connection.
• Negative (-) Terminal: Black terminal for negative battery connection.
• Kipas penyejuk: Temperature-controlled fans for efficient heat dissipation.
• Spark-Proof Nut: Designed to minimize sparks during connection.

4.3. Paparan LCD

Imej: LCD display showing various operational parameters of the inverter.

The LCD display provides real-time monitoring of the inverter's status:

1. Inverter working status (Normal/Fault)
2. Working temperature inside the inverter
3. Bateri voltage dan kapasiti
4. AC1 120V voltage dan amppemadam
5. AC2 120V voltage dan amppemadam
6. Output of 240V and frequency (60Hz)

5. Pemasangan

5.1. DC Battery Connection (24V System)

The inverter requires a 24V DC battery system. For a 24V system using two 12V batteries, connect them in series (positive of one battery to negative of the other). Ensure the battery bank is properly sized for your power needs.

Imej: Step-by-step guide for connecting DC cables to the inverter, emphasizing spark-proof connection.

1. Connect Negative Cable First: After connecting the black cable(s) to the battery's negative terminal, connect the other end of the black cable(s) to the inverter's negative terminal.
2. Contact Spark-Proof Terminal: Briefly touch the spark-proof terminal with the positive cable for 3-5 seconds to discharge any residual capacitance.
3. Connect Positive Cable: Connect the red cable(s) to the battery's positive terminal, then connect the other end to the inverter's positive terminal.

Penting: Use all provided cables. For 4 cables, use 2 black for negative and 2 red for positive. Ensure all connections are tight to maintain stable current flow.

5.2. AC Output Wiring

The inverter supports both 120V and 240V AC output. You can use the standard 120V outlets or the hardwire terminals for direct connection to your electrical panel.

Imej: Terperinci view of the AC output terminals, including L1, N, L2, and G (Ground) connections.

For hardwire connections:

• L1 to Hot 1
• L2 to Hot 2
• N to Neutral
• G ke Tanah

The inverter can run 120V and 240V appliances simultaneously. Ensure the total amperage does not exceed 25A for the connection.

6. Operasi

Once the inverter is properly installed and connected to the battery bank, press the power switch on the front panel to turn it on. The LCD display will illuminate, showing the current operational status.

6.1. Menyambungkan Peralatan

Plug your 120V AC appliances into the standard outlets or connect 120V/240V appliances to the hardwire terminals. Ensure the total wattage of connected appliances does not exceed the inverter's continuous power rating of 10000W.

The inverter is compatible with a wide range of appliances, including those for home, cabin, mobile business, RV, trailer, semi-truck, and boat use. It supports AGM, gel, flooded, lead-acid, and lithium-ion batteries.

7. Ciri-ciri Perlindungan

The WZRELB inverter is equipped with multiple protection features to ensure safe and reliable operation:

• Temperature-Controlled Cooling Fan: Activates automatically to prevent overheating.
• Vol. RendahtagPenggera/Penutupan: Protects batteries from over-discharge.
• Vol TinggitagPenggera/Penutupan: Protects the inverter and connected devices from over-voltage.
• Perlindungan Lebihan: Ditutup jika beban yang disambungkan melebihi kapasiti.
• Perlindungan Litar pintas: Mencegah kerosakan akibat litar pintas.
• Perlindungan Suhu Lebih: Ditutup jika suhu dalaman menjadi terlalu tinggi.
• Internally Fused: Provides additional circuit protection.
• Perlindungan Polariti Terbalik Bateri: Guards against incorrect battery connections.

Imej: Berakhirview of the inverter highlighting its robust protection features.

8. Spesifikasi

9. Penyelenggaraan

• Pembersihan tetap: Pastikan inverter bersih dan bebas daripada habuk dan serpihan. Gunakan kain kering untuk pembersihan.
• Semak Sambungan: Periksa secara berkala semua sambungan DC dan AC untuk memastikan ia ketat dan bebas daripada kakisan.
• Pengudaraan: Ensure cooling fans are not obstructed and operate freely.
• Kesihatan Bateri: Monitor your battery bank's health and charge levels regularly to prolong their lifespan and ensure optimal inverter performance.

10. Penyelesaian masalah

If you encounter issues with your inverter, refer to the LCD display for error codes or status messages. Common issues and basic troubleshooting steps include:

• Tiada Output Kuasa: Check battery connections, ensure the inverter is turned on, and verify battery voltage is within the operating range. Check for tripped circuit breakers or blown fuses.
• Penutupan Lebihan Beban: Reduce the load connected to the inverter. Ensure the total wattage of appliances does not exceed the inverter's capacity.
• Vol. Rendah/Tinggitage Tutup: Semak bateri voltage. If low, recharge batteries. If high, check charging system.
• Lebihan Penutupan Suhu: Ensure adequate ventilation around the inverter. Clear any obstructions from the cooling fans. Allow the inverter to cool down.
• Litar pintas: Putuskan semua beban dan periksa sebarang litar pintas pada pendawaian atau peralatan anda.

Untuk isu yang berterusan, hubungi sokongan pelanggan.

11. Waranti

The WZRELB 10000W 24V Pure Sine Wave Split Phase Power Inverter comes with a Waranti 1 tahun from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, improper installation, accidents, or unauthorized modifications.

Sila simpan bukti pembelian anda untuk tuntutan waranti.

12. Sokongan Pelanggan

For technical assistance, warranty claims, or any questions regarding your WZRELB inverter, please contact WZRELB customer support through the retailer where you purchased the product or visit the official WZRELB webtapak untuk maklumat hubungan.