Ansmann 1001-0143

ANSMANN BC 6-12V/2A Smart Charger Instruction Manual

1. Pengenalan

The ANSMANN BC 6-12V/2A Smart Charger is an intelligent, automatic 8-stage battery charger designed for safe and efficient charging of various 6V and 12V batteries. It is suitable for lead-acid, lead-gel, lead-fleece, and 12V LiFePO4 batteries with capacities ranging from 4 Ah to 60 Ah. This charger ensures optimal battery performance and extends battery life through its advanced charging process and comprehensive safety features.

Termasuk dalam Kotak:

  • ANSMANN BC 6-12V/2A Smart Charger Unit
  • Bateri Clamps (Klip Buaya)
  • Terminal Cincin
  • Manual Arahan

2. Persediaan dan Sambungan

Before connecting the charger, ensure the charger is unplugged from the mains power supply. Select the appropriate connection method for your battery: battery clamps for temporary connection or ring terminals for a more permanent installation.

Langkah Sambungan:

  1. Connect the red positive (+) charger cable to the positive (+) terminal of the battery.
  2. Connect the black negative (-) charger cable to the negative (-) terminal of the battery.
  3. Pastikan semua sambungan selamat.
  4. Plug the charger into a suitable mains power outlet. The charger will automatically begin its initial checks.
ANSMANN BC 6-12V/2A Smart Charger with battery clamps, ring terminals, and power cable

Figure 1: ANSMANN Smart Charger with included accessories for various connection types.

Person connecting the ANSMANN charger to a car battery

Gambar 2: Cthample of connecting the charger to a car battery using battery clamps.

ANSMANN charger connected to a motorcycle battery

Gambar 3: Cthample of connecting the charger to a motorcycle battery.

3. Arahan Operasi

The charger features an 8-stage fully automatic intelligent charging process. Use the 'MODE' button to select the appropriate charging program and current for your battery.

Selecting Charging Programs:

Tekan ke MODE button to cycle through the available charging programs:

  • 6V STD: For 6V lead-acid and lead-gel batteries.
  • 12V STD: For 12V lead-acid and lead-gel batteries.
  • LFP 12V: For 12V Lithium Iron Phosphate (LiFePO4) batteries.

For each program, you can select a charging current of either 1A or 2A. The LCD display will indicate the selected mode and charging status.

8-Stage Automatic Charging Process:

Pengecas akan bergerak secara automatik melalui langkah-langkah berikuttages to optimize battery charging and maintenance:

  1. Pemeriksaan Bateri: Assesses the battery's initial status and voltage.
  2. Desulfation: Applies pulsed current and voltage to break down sulfate crystals on lead plates, restoring battery capacity.
  3. Analisis: Temporarily halts charging to measure the battery's no-load voltage.
  4. Reactivation Charge: Prepares the battery for the main charge, resuming desulfation if necessary.
  5. Main Charge: Charges the battery with a constant current until it reaches a high state of charge.
  6. Charge Optimization: Gradually reduces the charging current to achieve maximum battery capacity.
  7. Voltage Kawalan: Monitors the battery's charge status to ensure optimal voltage peringkat.
  8. Holding Charge (Maintenance): Provides pulse maintenance charging as needed to prevent self-discharge and keep the battery fully charged.
Rajah yang menggambarkan 8-stage charging process of the ANSMANN charger

Figure 4: Visual representation of the 8-stage proses pengecasan automatik.

4. Penyelenggaraan

The ANSMANN BC 6-12V/2A Smart Charger is designed for durability and minimal maintenance. It is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. This allows for safe use in various environments.

The charger can remain connected to the battery for extended periods, providing a continuous holding charge to prevent self-discharge. This feature is ideal for vehicles stored for long durations, ensuring the battery remains fully charged and ready for use.

Periodically inspect the charger cables and connectors for any signs of damage or wear. Keep the charger clean and free from excessive dust or debris.

5. Troubleshooting and Safety Features

The ANSMANN Smart Charger incorporates multiple safety features to protect both the user and the battery during operation. If an issue occurs, the charger's LCD display may indicate an error or the charging process may not initiate.

Ciri-ciri Keselamatan:

  • Perlindungan Polariti Terbalik: Prevents damage if the battery connections are reversed.
  • Perlindungan Lebihan: Melindungi daripada tarikan arus yang berlebihan.
  • Perlindungan Pelepasan Dalam: Prevents charging of severely discharged batteries that may be damaged.
  • Perlindungan Litar pintas: Automatically shuts off if a short circuit is detected.
  • Spark Protection: Minimizes the risk of sparks during connection.
  • Splash Water Protection (IP65): Ensures safe operation in damp syarat.
  • Defect Detection: Identifies potentially faulty batteries.
ANSMANN charger in a wet environment, illustrating protection features

Figure 5: The charger's robust design and protection features, including splash water resistance.

ANSMANN charger connected to various battery types, highlighting defect detection

Figure 6: The charger's universal compatibility and defect detection capability.

Isu dan Penyelesaian Biasa:

  • Pengecas tidak dihidupkan: Ensure the charger is securely plugged into a working power outlet. Check for any visible damage to the power cord.
  • Charging not starting: Verify that the battery connections are correct (positive to positive, negative to negative). Ensure the battery voltage matches the selected charging program (6V or 12V). The battery might be too deeply discharged or defective, triggering protection.
  • Error indicator on display: Refer to the specific error codes in the full manual (if provided) or disconnect and reconnect the charger and battery to reset. If the error persists, the battery may be faulty.

6. Spesifikasi

CiriSpesifikasi
Nombor Model1001-0143
Input VoltageAC 100-240V, 50/60Hz
Keluaran Voltage6V / 12V (DC)
Mengecas Arus1A / 2A (selectable)
Kapasiti Bateri4 Ah - 60 Ah
Jenis BateriLead-Acid, Lead-Gel, Lead-Fleece, 12V LiFePO4
Mengecas Stages8-Stage Automatik
Penilaian PerlindunganIP65 (Dust and Splash Water Protected)
Dimensi Produk7.09 x 3.11 x 1.93 inci (180 x 79 x 49 mm)
Berat Barang1.03 paun (0.47 kg)

7. Waranti

The ANSMANN BC 6-12V/2A Smart Charger comes with a Waranti pengilang selama 3 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, unauthorized modifications, accidents, or normal wear and tear.

8. Sokongan

For further assistance, technical support, or warranty inquiries, please contact ANSMANN customer service. You can find contact information on the official ANSMANN webtapak atau melalui peruncit anda.

For more information about ANSMANN products, visit the Ansmann Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.