VITO 1800W 2-in-1 Combined Circular Saw and Miter Saw

1. Pengenalan

This manual provides essential information for the safe operation, maintenance, and troubleshooting of your VITO 1800W 2-in-1 Combined Circular Saw and Miter Saw, model VISCC18250. This versatile tool is designed for precise cutting of wood and aluminum materials, offering both miter saw and table saw functionalities. Please read this manual thoroughly before operating the machine to ensure safe and efficient use.

Gambar 1: Lebihview of the VITO 2-in-1 Combined Circular Saw and Miter Saw.

2. Arahan Keselamatan

Sentiasa ikuti langkah berjaga-jaga keselamatan asas untuk mengurangkan risiko kebakaran, kejutan elektrik dan kecederaan diri. Simpan manual ini untuk rujukan masa hadapan.

2.1 Keselamatan Alat Kuasa Am

• Keselamatan Kawasan Kerja: Pastikan kawasan kerja bersih dan terang. Kawasan bersepah atau gelap mengundang kemalangan. Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
• Keselamatan Elektrik: Palam alat kuasa mesti sepadan dengan alur keluar. Jangan sekali-kali mengubah suai palam dalam apa jua cara. Elakkan sentuhan badan dengan permukaan yang dibumikan atau dibumikan seperti paip, radiator, julat dan peti sejuk.
• Keselamatan Diri: Sentiasa pakai pelindung mata, pelindung pendengaran dan topeng habuk. Berpakaianlah dengan betul; elakkan pakaian atau barang kemas yang longgar. Jauhkan rambut, pakaian dan sarung tangan daripada bahagian yang bergerak.
• Penggunaan dan Penjagaan Alat: Jangan paksa alat kuasa. Gunakan alat kuasa yang betul untuk aplikasi anda. Putuskan sambungan palam daripada sumber kuasa sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alatan kuasa.

2.2 Specific Saw Safety

• Always use the blade guard. Ensure it operates correctly before each use.
• Secure the workpiece firmly. Do not hold small pieces by hand.
• Jangan sekali-kali sampai ke kawasan bilah semasa gergaji sedang berjalan atau disambungkan kepada kuasa.
• Use only blades specified for this tool and suitable for the material being cut.
• Maintain a safe distance from the blade. Keep hands clear of the cutting path.

3. Komponen Selesaiview

Familiarize yourself with the main components of your VITO combined saw:

• Perumahan Motor: Mengandungi motor 1800W.
• Pengawal Bilah: Melindungi pengguna daripada bilah yang berputar.
• Bilah Memotong: 250mm diameter, 30mm bore, 36 teeth.
• Meja Miter: Rotates for angle adjustments in miter saw mode.
• Table Saw Top: Upper cutting surface for table saw mode.
• Pagar Koyak: Adjustable guide for straight cuts in table saw mode.
• Tolok Miter: For angled cuts in table saw mode (not explicitly shown but implied).
• Pelarasan Serong: Mechanism to tilt the blade for angled cuts.
• Pelabuhan Pengumpulan Habuk: For connecting a dust extraction system.
• Suis Hidup/Mati: Power control for the tool.

Rajah 2: Sisi view of the saw in miter saw configuration, showing blade guard and motor.

Rajah 3: Atas view of the saw in table saw configuration, showing the rip fence and table surface.

4. Persediaan

4.1 Membongkar dan Pemeriksaan

Carefully remove the saw from its packaging. Inspect for any damage that may have occurred during shipping. Ensure all components listed in the packing list are present. Do not operate the tool if any damage is found.

4.2 Mengamankan Gergaji

For stable and safe operation, the saw must be securely mounted to a workbench or a dedicated saw stand. Use appropriate bolts and nuts to fasten the saw through the mounting holes in its base.

4.3 Pemasangan/Penggantian Bilah

1. Putuskan Kuasa: Always unplug the saw from the power source before performing any maintenance or blade changes.
2. Bilah Akses: Depending on the mode (miter or table saw), lift or remove the necessary guards to access the blade.
3. Longgarkan Nut Arbor: Gunakan sepana yang disediakan untuk melonggarkan nat arbor sambil memegang butang kunci arbor.
4. Keluarkan Bilah Lama: Tanggalkan bilah lama dengan berhati-hati, perhatikan arah putarannya.
5. Pasang Bilah Baharu: Place the new 250mm blade onto the arbor, ensuring the teeth are oriented correctly for cutting (usually indicated by an arrow on the blade matching an arrow on the guard).
6. Tighten Arbor Nut: Securely tighten the arbor nut with the wrench while holding the arbor lock.
7. Replace Guards: Ensure all guards are properly reinstalled and functioning before reconnecting power.

5. Arahan Operasi

This saw offers two primary modes of operation: miter saw and table saw. Ensure the saw is in the correct configuration for your desired cut.

5.1 Switching Between Miter Saw and Table Saw Modes

The saw features a 2-in-1 design. To switch modes, carefully follow the instructions in your saw's specific manual for unlocking and rotating the cutting head assembly. Ensure the mechanism is fully locked in place for the chosen mode before operation.

5.2 Miter Saw Operation

1. Set Miter Angle: Loosen the miter lock knob, rotate the miter table to the desired angle (from -45° to 45°), and tighten the knob securely.
2. Set Bevel Angle: For bevel cuts, loosen the bevel lock, tilt the motor/blade assembly to the desired angle (from 0° to 45°), and tighten the lock.
3. Kedudukan Bahan Kerja: Letakkan bahan kerja dengan kukuh pada pagar dan meja mitra. Gunakan clamps jika perlu.
4. Mula Melihat: Press the ON switch. Allow the blade to reach full speed.
5. Make Cut: Slowly and steadily bring the blade down through the workpiece. Do not force the cut.
6. Return Blade: Once the cut is complete, release the switch and allow the blade to stop before raising it.

Figure 4: Miter saw configuration demonstrating blade tilt for bevel cuts.

5.3 Table Saw Operation

1. Configure for Table Saw: Ensure the saw head is locked in the upright table saw position.
2. Adjust Rip Fence: Position the rip fence to the desired cutting width. Lock it securely.
3. Laraskan Ketinggian Bilah: Use the blade height adjustment mechanism to set the blade exposure slightly above the workpiece thickness.
4. Kedudukan Bahan Kerja: Place the workpiece flat on the table, against the rip fence.
5. Mula Melihat: Press the ON switch. Allow the blade to reach full speed.
6. Make Cut: Using a push stick, slowly and steadily feed the workpiece into the blade. Keep hands clear of the blade path.
7. Potongan Lengkap: Continue feeding until the cut is complete. Turn off the saw and wait for the blade to stop before removing the workpiece.

Figure 5: Table saw configuration, showing the rip fence and cutting surface.

6. Penyelenggaraan

Regular maintenance ensures the longevity and safe operation of your saw. Always disconnect the power before performing any maintenance.

• Pembersihan: After each use, clean the saw thoroughly. Remove sawdust and debris from the motor vents, blade guard, and table surfaces. Use a brush or compressed air. Do not use solvents that could damage plastic parts.
• Pemeriksaan Bilah: Regularly inspect the blade for sharpness, missing teeth, or cracks. A dull or damaged blade can cause kickback and poor cut quality. Replace damaged blades immediately.
• Guard Functionality: Ensure all blade guards move freely and return to their protective position automatically.
• Pengikat: Check all nuts, bolts, and screws for tightness. Tighten any loose fasteners.
• Berus Karbon: If the motor performance decreases, the carbon brushes may need inspection and replacement. This should ideally be done by a qualified service technician.

7. Penyelesaian masalah

Rujuk bahagian ini untuk isu biasa dan penyelesaiannya. Jika masalah berterusan, hubungi sokongan pelanggan.

8. Spesifikasi

9. Waranti dan Sokongan

This VITO product is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VITO website. For technical support, spare parts, or service inquiries, please contact your retailer or the authorized VITO service center in your region. Always provide the model number (VISCC18250) and serial number when contacting support.