pengenalan
This manual provides essential instructions for the safe installation, operation, and maintenance of your APC Back-UPS Pro 1050VA (BN1050M) Uninterruptible Power Supply. Please read this manual thoroughly before installing or operating the unit.
Imej: Depan view of the APC Back-UPS Pro 1050VA (BN1050M) unit, showcasing its compact tower design and control panel.
Persediaan
1. Membongkar dan Pemeriksaan
- Carefully unpack the UPS and inspect it for any shipping damage. If damage is found, notify the carrier and dealer.
- Verify that all components are included: UPS unit, user manual, USB communication cable.
2. penempatan
- Place the UPS on a flat, stable surface.
- Ensure adequate airflow around the unit. Do not block ventilation openings. Maintain at least 1 inch (2.5 cm) of clearance on all sides.
- Avoid direct sunlight, excessive heat, humidity, or conductive contaminants.
Image: The APC Back-UPS Pro 1050VA (BN1050M) unit positioned discreetly under a desk, demonstrating its compact size for convenient placement in a home or office environment.
3. Peralatan Penyambung
The Back-UPS Pro 1050VA features two types of outlets:
- Cawangan Sandaran Bateri & Lonjakan Perlindungan (4 cawangan): Connect critical equipment such as computers, monitors, and external hard drives to these outlets. These outlets provide power from the UPS battery during power outagdan melindungi daripada lonjakan.
- Outlet Perlindungan Lonjakan Sahaja (4 cawangan): Connect non-critical equipment like printers, scanners, or speakers to these outlets. These outlets provide surge protection but do not provide battery backup power during an outage.
Imej: Belakang view of the APC Back-UPS Pro 1050VA (BN1050M), clearly showing the arrangement of the 8 outlets (4 battery backup, 4 surge only), the USB and Serial data ports, and the circuit breaker. A QR code for support is also visible.
4. Pengecasan Awal
Connect the UPS power cord to a grounded 120V AC outlet. The unit will begin charging the battery. Allow the battery to charge for at least 24 hours before connecting equipment to ensure maximum runtime capacity.
5. Pemasangan Perisian (Pilihan)
For advanced power management features, such as automatic shutdown during extended outages, install APC PowerChute software. Connect the provided USB cable from the UPS data port to your computer. Download the latest software version from the official APC webtapak: apc.com/us/en/support/software-downloads/.
Arahan Operasi
1. Turning the UPS On/Off
- Untuk Menghidupkan: Press and hold the power button on the front panel until a beep is heard. The unit will perform a self-test, and the 'On Line' indicator will illuminate.
- Untuk Mematikan: Press and hold the power button until a beep is heard and the unit powers down.
2. Memahami Petunjuk
Panel hadapan mempunyai penunjuk LED dan penggera boleh didengar untuk menyampaikan status UPS:
- Dalam Talian (LED Hijau): UPS membekalkan kuasa utiliti ke peralatan yang disambungkan.
- Pada Bateri (LED Kuning): The UPS is supplying battery power to connected equipment during a power outage. An audible alarm will sound.
- Beban Lebih (LED Merah): The connected load exceeds the UPS capacity. Disconnect non-essential equipment immediately.
- Fault (Red LED): Indicates an internal fault. Refer to the Troubleshooting section.
- Building Wiring Fault (Red LED on rear): Indicates a wiring problem in the building's electrical system (e.g., missing ground, reversed polarity). Consult a qualified electrician.
3. Fungsi Uji Kendiri
To manually initiate a self-test, press and hold the 'Test' button on the front panel for a few seconds. The UPS will briefly switch to battery power to test its battery and internal circuitry. This is recommended monthly.
Penyelenggaraan
1. Battery Care and Replacement
- The internal battery is not user-replaceable. Contact APC support for battery service or replacement.
- To maximize battery life, ensure the UPS is kept in a cool, dry environment and remains connected to utility power.
- Regularly perform self-tests to monitor battery health.
2. Pembersihan
Bersihkan bahagian luar UPS dengan kain lembutamp cloth. Do not use solvents or abrasive cleaners. Ensure ventilation openings are free from dust and debris.
Menyelesaikan masalah
Rujuk jadual di bawah untuk isu biasa dan penyelesaiannya.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| UPS tidak dihidupkan. | Not connected to utility power; discharged battery. | Ensure power cord is securely plugged into a live outlet. Allow 24 hours for initial battery charge. |
| UPS berbunyi secara berterusan atau kerap. | On battery mode; low battery; overload. | Check utility power. Allow battery to recharge. Reduce connected load. |
| LED beban lampau menyala. | Too much equipment connected to battery backup outlets. | Disconnect non-essential equipment from battery backup outlets until the LED turns off. |
| Building Wiring Fault LED is illuminated. | Wiring problem in the building. | Rujuk juruelektrik yang berkelayakan untuk memeriksa pendawaian bangunan. |
| UPS provides short runtime. | Bateri sudah lama atau tidak dicas sepenuhnya. | Allow battery to charge for 24 hours. If issue persists, the battery may need service. Contact APC support. |
Set Semula Pemutus Litar
If the UPS experiences an overload and shuts down, the circuit breaker on the rear panel may trip. Disconnect some equipment, then push the circuit breaker button to reset the unit. Refer to the rear panel image in the Setup section for its location.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | BN1050M |
| Kapasiti | 1050VA / 600W |
| Masukan Nominal Voltage | 120V AC |
| Keluaran Nominal Voltage | 120V AC |
| Kekerapan Input | 60 Hz |
| Bentuk Gelombang Output | Stepped approximation to a sine wave |
| Bilangan Outlet | 8 (4 Sandaran & Lonjakan Bateri, 4 Lonjakan Sahaja) |
| Jenis Bateri | Litium Ion |
| Masa Caj Semula Biasa | 24 hours (for initial charge) |
| Faktor Bentuk | Menara |
| Sambungan Input | NEMA 5-15P (Type B - 3 pin North American) |
| Port Data | USB, Bersiri |
Waranti & Sokongan
For detailed warranty information, please refer to the official APC website or the warranty card included with your product. APC provides technical support and customer service to assist with any product-related inquiries.
- Sokongan dalam talian: Visit the APC support page at apc.com/us/en/support/ untuk Soalan Lazim, dokumentasi dan pilihan hubungan.
- Pendaftaran Produk: Register your product online to receive important updates and warranty service. You can use the QR code on the rear of the unit or visit go2se.com/ref=BN1050M.
