BSEED N020-120V-30A Surge Protector User Manual

1. Pengenalan

The BSEED N020-120V-30A Surge Protector is a heavy-duty voltage regulator designed to protect your valuable home appliances from electrical fluctuations. It safeguards against high and low voltage, brownouts, spikes, instant surges, power failures, and load shedding. This device is suitable for a wide range of appliances, including refrigerators, air conditioners, TVs, computers, and other household electronics operating at 120V and up to 30A (3600W).

2. Arahan Keselamatan

Please read and understand all safety instructions before installing or operating this surge protector. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected appliances.

• Bahaya Elektrik: Ensure the power supply is disconnected before installation or making any adjustments.
• Pendawaian yang betul: Always ensure the correct polarity of the cables (phase, neutral, grounding) during connection. Refer to the connection diagram for proper wiring.
• Kapasiti Dinilai: Do not exceed the maximum current capacity of 30 Amps or 3600 Watts. Overloading can cause damage and fire hazards.
• Penggunaan Dalaman Sahaja: This device is intended for indoor use in dry locations. Do not expose to water or excessive humidity.
• Sambungan Selamat: Ensure all wire connections are tight and secure to prevent arcing or overheating.
• Pemasangan Profesional: Jika anda tidak pasti tentang proses pemasangan, sila rujuk juruelektrik yang berkelayakan.

3. Produk Lebihview dan Ciri

3.1 Komponen dan Penunjuk Utama

• Indicator of NORMAL voltage (Hijau): Bercahaya apabila voltage berada dalam julat operasi yang selamat.
• Indicator of OVER voltage (Orange): Illuminates when the input voltage exceeds the set maximum threshold.
• Indicator of LOW voltage (Merah): Illuminates when the input voltage drops below the set minimum threshold.
• Vol. Boleh Larastage Tetapan: Dials for setting minimum (Under Voltage Cut-off) and maximum (Over Voltage Cut-off) voltage ambang.
• Adjustable Reconnection Delay: Dial for setting the waiting time before power is reconnected after a voltage acara.

3.2 Ciri Lanjutan

1. Adjustable LOW voltage dibenarkan: Boleh dipilih antara 90V dan 115V.
2. Adjustable OVER voltage dibenarkan: Boleh dipilih antara 125V dan 145V.
3. Adjustable waiting cycle: Between 180-300 seconds (3 to 5 minutes).
4. Manual ON and OFF switch: For convenient control.
5. Assembly facilities: Two (2) options for mounting on a 2"x4" box or a flat surface.
6. Safer connectors: Terminal input dan output dilindungi dengan penutup.
7. Convenient access for gutters: Through predictable sections.
8. Protective cover with safety seal holes: To prevent unauthorized manipulation of adjustments and connections.

3.3 Dimensi Produk

4. Pemasangan

4.1 Gambarajah Pendawaian

Rujuk kepada Figure 2.1 (Connection Diagram) in the Safety Instructions section for detailed wiring instructions. Ensure all connections are made correctly, matching phase (L), neutral (N), and grounding (G) wires from your electric supply to the protector's input terminals, and then from the protector's output terminals to your appliance.

4.2 Pemasangan

The surge protector can be mounted in two ways:

• On a 2"x4" electrical box: Use the designated assembly facilities on the device.
• Pada permukaan rata: Secure the device using appropriate screws through the provided mounting holes.

4.3 Persediaan dan Pelarasan Awal

Before connecting your appliance, you can adjust the voltage cut-off points and the delay time:

• Di bawah Voltage Potongan: Use the 'MINIMUM V-' dial to set the lowest acceptable voltage antara 90V dan 115V.
• Lebih Voltage Potongan: Use the 'MAXIMUM V+' dial to set the highest acceptable voltage antara 125V dan 145V.
• Reconnection Delay: Use the 'RECONNECTION S' dial to set the waiting period (3 to 5 minutes) before power is restored after a voltage acara.

It is recommended to set these values according to the specifications of the appliance you intend to protect and your local power grid stability.

5. Operasi

5.1 Menghidupkan

After proper installation and adjustment:

1. Ensure the manual ON/OFF switch is in the 'ON' position.
2. Apply power to the surge protector.
3. The device will initiate a delay cycle (3 to 5 minutes, as set). During this time, the indicator lights may show a waiting state.
4. Once the delay period is complete and the voltage is stable within the set parameters, the green 'NORMAL' indicator light will turn on, and power will be supplied to your connected appliance.

5.2 Lampu Penunjuk

• Green Light (NORMAL): Menunjukkan bahawa voltage is stable and within the safe operating range, and power is being supplied to the appliance.
• Orange Light (OVER VOLTAGE): Indicates that the input voltage is too high. The protector has cut off power to safeguard the appliance. Power will be restored after the voltage normalizes and the delay cycle completes.
• Red Light (LOW VOLTAGE): Indicates that the input voltage is too low. The protector has cut off power to safeguard the appliance. Power will be restored after the voltage normalizes and the delay cycle completes.

5.3 Aplikasi Khas

6. Penyelenggaraan

The BSEED N020-120V-30A Surge Protector requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Pembersihan: Periodically wipe the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or solvents.
• Semakan Sambungan: Annually inspect all wiring connections to ensure they remain tight and free from corrosion.
• Keadaan Persekitaran: Ensure the device is kept in a dry, well-ventilated area, away from direct sunlight, heat sources, and corrosive environments.
• Penutup Pelindung: Keep the protective cover securely closed to prevent dust and unauthorized access to internal components.

7. Penyelesaian masalah

Jika anda menghadapi masalah dengan pelindung lonjakan anda, rujuk kepada masalah dan penyelesaian biasa berikut:

8. Spesifikasi Teknikal

9. Hubungi dan Sokongan

For further assistance, technical support, or warranty inquiries, please contact BSEED customer service through the retailer where the product was purchased or visit the official BSEED webtapak.

Pengeluar: BSEED