ARRMA Wheel Axle and Hub Set (ARA311178) Instruction Manual

1. Produk Lebihview

The ARRMA Wheel Axle and Hub Set, model ARA311178, is designed for RC vehicles. This high-quality set is manufactured from durable material to provide long-lasting performance, especially under extreme bashing conditions. It ensures a precise fit for your vehicle and is built for toughness.

Image 1.1: Components of the ARRMA Wheel Axle and Hub Set.

2. Maklumat Keselamatan

AMARAN:

• Baca manual arahan KESELURUHAN untuk membiasakan diri dengan ciri-ciri produk sebelum beroperasi. Kegagalan untuk mengendalikan produk dengan betul boleh mengakibatkan kerosakan pada produk, harta peribadi dan menyebabkan kecederaan serius.
• Ini adalah produk hobi yang canggih. Ia mesti dikendalikan dengan berhati-hati dan akal dan memerlukan beberapa keupayaan mekanikal asas.
• Kegagalan untuk mengendalikan produk ini dengan cara yang selamat dan bertanggungjawab boleh mengakibatkan kecederaan atau kerosakan pada produk atau harta benda lain.
• Produk ini tidak bertujuan untuk digunakan oleh kanak-kanak tanpa pengawasan orang dewasa secara langsung.
• Jangan gunakan dengan komponen yang tidak serasi atau ubah produk ini dalam apa jua cara di luar arahan yang diberikan oleh Horizon Hobby, LLC.
• The product manual contains instructions for safety, operation, and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup, or use, in order to operate correctly and avoid damage or serious injury.

3. Kandungan Pakej

The ARRMA Wheel Axle and Hub Set (ARA311178) package includes the following components:

• 4 x Gandar Roda
• 4 x Wheel Hexes
• 4 x Stub Axles

Note: The "Wheel Axle and Hub Set" listed in the 'whats_in_the_box' is a general term for these combined components.

4. Arahan Pemasangan

Follow these steps to install the ARRMA Wheel Axle and Hub Set onto your RC vehicle:

1. Keluarkan Komponen Lama: Carefully remove the existing wheel axles, hexes, and stub axles from your RC vehicle. Refer to your vehicle's specific manual for detailed disassembly instructions if needed.
2. Install New Axles: Install the new ARRMA wheel axles into the appropriate locations on your RC vehicle.
3. Attach Hexes and Stub Axles: Securely attach the new wheel hexes and stub axles. Ensure all parts are correctly oriented and seated.
4. Pengikat Selamat: Use the appropriate tools to securely fasten all components. Double-check that all screws, pins, or clips are tightened to the manufacturer's specifications.
5. Sahkan Penjajaran: After installation, ensure that the wheels are properly aligned and spin freely without obstruction. Check for any excessive play or binding.

Always use appropriate tools and follow safety precautions during installation.

5. Penyelenggaraan

To ensure the longevity and optimal performance of your ARRMA Wheel Axle and Hub Set, consider the following maintenance tips:

• Pemeriksaan Berkala: Periodically inspect the wheel axles, hexes, and stub axles for signs of wear, damage, or bending. Replace any damaged components immediately.
• Pembersihan: After use, especially in dirty or wet conditions, clean the components to remove dirt, debris, and moisture. A soft brush and compressed air can be effective.
• Pelinciran: While these parts typically do not require extensive lubrication, ensure that any moving parts they interact with (e.g., bearings) are properly maintained according to your RC vehicle's manual.
• Pengikat Selamat: Regularly check that all fasteners holding the axles and hubs are tight. Vibrations during operation can sometimes loosen screws.

6. Spesifikasi

7. Waranti dan Sokongan

For warranty information, technical support, or replacement parts, please contact ARRMA or Horizon Hobby, LLC directly through their official weblaman web atau saluran khidmat pelanggan. Simpan resit pembelian anda sebagai bukti pembelian.

You can visit the official ARRMA store for more information: Kedai ARRMA di Amazon