Produk Selesaiview
The Keenso 10 Inch 48V 800W Electric Scooter Hub Motor is designed for electric scooters, bicycles, and folding bikes, offering a powerful and quiet riding experience. Constructed from durable aluminum alloy, this motor is built to withstand various road conditions and provides stable performance even in wet weather. Its noiseless operation ensures a comfortable and enjoyable ride.
Image: The Keenso 10 Inch 48V 800W Electric Scooter Hub Motor, showcasing its robust design and integrated tire.
Ciri-ciri Utama
- Pembinaan Aloi Aluminium: Lightweight yet strong, enhancing overall wheel performance and durability.
- Reka Bentuk Teguh: Engineered to withstand diverse and challenging road conditions.
- Operasi Tanpa Bunyi: Provides a quiet and enjoyable riding experience by minimizing operational noise.
- Prestasi Boleh Dipercayai: Offers stable and damage-resistant operation, even in wet weather conditions.
- Keserasian Luas: Suitable for a broad range of applications, including electric scooters, electric bicycles, and folding bikes.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nama Jenama | Keenso |
| Nama Model | Keensox2p0hmgb1e |
| Dimensi Pakej Item L x W x H | 8.66 x 8.66 x 8.46 inci |
| Berat Pakej | 3.62 Kilogram |
| Berat Barang | 3.62 Kilogram |
| warna | Perak |
| Pengeluar | Keenso |
| Nombor Bahagian | Keensox2p0hmgb1e |
| Tarikh Mula-mula Tersedia | 24 Oktober 2023 |
Persediaan dan Pemasangan
This section provides general guidance for installing your Keenso hub motor. Professional installation is recommended for optimal performance and safety. Ensure all connections are secure and properly insulated.
Membuka kotak dan Pemeriksaan
Carefully remove the hub motor from its packaging. Inspect the motor and all included components for any signs of damage during transit. Report any damage to your supplier immediately.
Video: Unboxing and initial inspection of an electric scooter hub motor, showing the wheel and wiring connections.
Sambungan Pendawaian
The hub motor comes with pre-attached wiring. Ensure these wires are correctly connected to your scooter's controller and power supply. Refer to your scooter's specific wiring diagram for precise connections. Typically, the motor will have three main phase wires and several smaller Hall sensor wires.
Image: Close-up of the Keenso hub motor showing the wiring harness and connectors.
Inflasi Tayar
Before operation, ensure the tire is inflated to the recommended pressure. Check the sidewall of the tire for the maximum and recommended PSI (pounds per square inch) or Bar pressure. Proper tire pressure is crucial for safety, performance, and tire longevity.
Image: Close-up of the tire valve on the Keenso hub motor, indicating the point for inflation.
Arahan Operasi
Once installed, the hub motor operates in conjunction with your electric scooter or bike's controller. Ensure your battery is fully charged before use. Always perform a pre-ride check to confirm all components are secure and functioning correctly.
Kuasa Permulaan
Turn on your electric vehicle's power. The motor should respond to throttle input from your controller. Start with low throttle to test responsiveness and control.
Video: A short clip demonstrating the power and operation of a 10-inch electric scooter hub motor in an outdoor setting.
Syarat Menunggang
The motor is designed for stable performance across various road conditions. Its robust construction and anti-abrasion tire tread provide good grip. While designed to be damage-resistant in wet weather, avoid submerging the motor in water.
Image: An electric scooter with a similar hub motor in use, demonstrating typical riding conditions.
Penyelenggaraan
Regular maintenance ensures the longevity and optimal performance of your Keenso hub motor. Follow these guidelines to keep your motor in excellent condition.
Pembersihan
Keep the motor and tire clean from dirt and debris. Use a damp cloth to wipe down the exterior. Avoid using high-pressure water jets directly on the motor or electrical connections.
Pemeriksaan Tayar
Regularly inspect the tire for wear, punctures, or damage. Maintain correct tire pressure as specified on the tire sidewall. Replace worn tires promptly to ensure safety and performance.
Image: Close-up of the tire tread on the Keenso hub motor, highlighting its pattern for grip.
Sambungan Elektrik
Periodically check all electrical connections for tightness and corrosion. Ensure wires are not frayed or damaged. Secure any loose connections to prevent intermittent power or malfunction.
Menyelesaikan masalah
This section addresses common issues you might encounter with your hub motor. If you experience problems not listed here, contact customer support.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Motor tidak berputar | Loose electrical connections, discharged battery, faulty controller. | Check all wiring, charge battery, test controller. |
| Kuasa/kelajuan berkurangan | Low battery charge, incorrect tire pressure, motor overheating. | Charge battery, inflate tire to correct pressure, allow motor to cool. |
| Bunyi luar biasa dari motor | Foreign object in motor, damaged bearings. | Inspect for debris, contact support for bearing replacement. |
Waranti dan Sokongan
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Keenso webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.
- Tempoh Waranti: Please check your product packaging or retailer's policy for specific warranty duration.
- Hubungi Sokongan: Untuk bantuan, sila layari Keenso Store on Amazon atau hubungi penjual anda.