EVTSCAN Projection Clock User Manual

1. Maklumat Keselamatan Penting

Please read all instructions carefully before using the EVTSCAN Projection Clock. Keep this manual for future reference.

• Jangan dedahkan peranti kepada suhu yang melampau, cahaya matahari langsung atau kelembapan yang tinggi.
• Avoid dropping or subjecting the clock to strong impacts.
• Jangan cuba membuka atau membaiki peranti sendiri. Hubungi kakitangan perkhidmatan yang berkelayakan.
• Use only the specified power adapter (DC 5.0V, 1.2A) or appropriate batteries (2xAAA, not included).
• Jauhkan daripada kanak-kanak.

2. Produk Lebihview

The EVTSCAN Projection Clock is a versatile digital alarm clock featuring a 3-inch backlit LCD screen that displays time, date, day of the week, temperature, and humidity. It includes a projection function to display time and temperature on a wall or ceiling, dual alarms with snooze, and a USB port for charging mobile phones.

Ciri-ciri Utama:

• 12/24-hour time format display.
• Date and day of the week display (7 languages for week).
• Temperature detection (-9℃ to +50℃) and humidity detection (20% to 95%).
• Projection function with 180-degree rotation for time and temperature.
• Dual alarm clocks with slowly increasing isipadu.
• 5-minute snooze function.
• Port pengecasan USB untuk peranti mudah alih.
• Adjustable backlight with 4 levels (high, medium, low, off).

Rajah 2.1: Depan view of the EVTSCAN Projection Clock, showing the LCD display and projection lens.

3. Kandungan Pakej

Selepas membongkar, sila pastikan semua item yang disenaraikan di bawah ada dan dalam keadaan baik:

• 1 x EVTSCAN Projection Clock
• 1 x Kabel USB
• 1 x Manual Pengguna Bahasa Inggeris

Note: 2xAAA batteries are required for battery power and are not included in the package.

4. Persediaan

4.1 Menguasakan Peranti

The EVTSCAN Projection Clock can be powered by either AAA batteries or via the included USB cable.

4.1.1 Pemasangan Bateri

1. Cari penutup petak bateri di belakang jam.
2. Slide open the cover.
3. Masukkan dua (2) bateri AAA, pastikan kekutuban (+/-) betul.
4. Tutup penutup petak bateri dengan selamat.

Note: When powered by batteries, the backlight will only light up for 8 seconds when activated to conserve power. The projection lamp will also light up for 8 seconds.

4.1.2 USB Power Connection

1. Connect the small end of the provided USB cable to the DC 5.0V 1.2A input port on the back of the clock.
2. Sambungkan hujung kabel USB yang lebih besar kepada penyesuai kuasa USB yang serasi (tidak disertakan) atau port USB berkuasa.

Note: When powered by USB, the backlight and projection lamp can remain continuously on, with adjustable brightness for the backlight.

Rajah 4.1: belakang view of the clock, indicating the battery compartment and DC 5.0V 1.2A power input.

5. Arahan Operasi

5.1 Fungsi Butang

Familiarize yourself with the control buttons located on the front and sides of the clock:

• MASA: Memasuki mod tetapan masa.
• PENGGERA: Memasuki mod tetapan penggera.
• +: Increases values, switches 12/24HR format, adjusts backlight.
• -: Decreases values, switches temperature units (℃/℉).
• Projection ON/OFF Switch: Activates or deactivates the projection. (Located on the back/side)
• Alarm 1 ON/OFF Switch: Activates or deactivates Alarm 1. (Located on the side)
• Alarm 2 ON/OFF Switch: Activates or deactivates Alarm 2. (Located on the side)

Rajah 5.1: sebelah view showing Alarm 1 and Alarm 2 ON/OFF switches, and the USB charging port.

5.2 Menetapkan Masa dan Tarikh

1. Tekan dan tahan butang MASA button to enter time setting mode. The hour display will flash.
2. Gunakan + or - butang untuk melaraskan jam.
3. Tekan MASA again to confirm the hour and move to minute setting. Adjust with + or -.
4. Teruskan menekan MASA to cycle through setting year, month, and day. Adjust each with + or -.
5. Selepas menetapkan hari, tekan MASA kali terakhir untuk keluar dari mod tetapan.
6. Untuk bertukar antara format 12 jam dan 24 jam, tekan butang + button during normal time display.
7. To switch between Celsius (℃) and Fahrenheit (℉) for temperature, press the - button during normal time display.

5.3 Menetapkan Penggera

The clock features two independent alarms (Alarm 1 and Alarm 2).

1. Tekan dan tahan butang PENGGERA button to enter Alarm 1 setting mode. The Alarm 1 hour display will flash.
2. Gunakan + or - butang untuk melaraskan jam penggera.
3. Tekan PENGGERA again to confirm the hour and move to Alarm 1 minute setting. Adjust with + or -.
4. Tekan PENGGERA again to move to Alarm 2 hour setting, and repeat the process for Alarm 2.
5. After setting Alarm 2 minutes, press PENGGERA kali terakhir untuk keluar dari mod tetapan.
6. To activate or deactivate an alarm, use the corresponding Penggera 1 HIDUP/MATI or Penggera 2 HIDUP/MATI switch on the side of the clock. An alarm icon will appear on the display when active.

5.3.1 Fungsi Tunda

When an alarm sounds, press any button (except the alarm ON/OFF switch) to activate the 5-minute snooze function. The alarm will sound again after 5 minutes. To turn off the alarm completely, slide the corresponding alarm ON/OFF switch to OFF.

5.4 Fungsi Unjuran

The clock can project the time and temperature onto a wall or ceiling.

1. Cari Unjuran HIDUP/MATI switch on the back of the clock. Slide it to ON to activate the projection.
2. Adjust the angle of the projection arm (the part with the lens) to direct the projection as desired. The arm can rotate nearly 180 degrees.
3. The projection will display the current time and temperature in a soft red color.

Rajah 5.2: sebelah view showing the projection arm extended and ready for use.

Rajah 5.3: The clock projecting time and temperature onto a wall in a bedroom setting.

5.5 Pelarasan Lampu Latar

When the clock is powered by USB, the backlight can be adjusted to four levels: high, medium, low, or off. Repeatedly press the + button during normal time display to cycle through the brightness levels.

When powered by batteries, the backlight will illuminate for 8 seconds when any button is pressed, then turn off to conserve power.

5.6 Port Pengecasan USB

The clock features a USB charging port (5V=1A) on its side. You can use this port to charge your mobile phone or other small electronic devices while the clock is connected to USB power.

Note: The USB charging port only functions when the clock is powered via the USB cable. It does not work when the clock is running on battery power.

6. Penyelenggaraan

6.1 Pembersihan

• Lap permukaan jam dengan kain lembut dan kering.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or electronic components.
• Keep the projection lens clean for clear projection. Use a soft, lint-free cloth.

6.2 Penggantian Bateri

When the display becomes dim or the clock functions erratically while on battery power, it's time to replace the AAA batteries. Refer to Section 4.1.1 for battery installation instructions. Always replace both batteries at the same time with new ones.

7. Penyelesaian masalah

8. Spesifikasi

Rajah 8.1: Product dimensions: 5.3 inches wide by 3.1 inches high.

9. Waranti dan Sokongan

EVTSCAN products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your purchase or contact your retailer.

If you encounter any issues or have questions regarding your EVTSCAN Projection Clock, please contact the seller or EVTSCAN customer support for assistance. Please have your model number (B0CLGDFCGX) ready when contacting support.

Untuk bantuan lanjut, anda boleh melawati EVTSCAN Store on Amazon.