I have a Vector SS16LVC 1600. My charging cord is defective and does not charge the unit. Where can I get a replacement plug-in adapter and cord?

The VECTOR SS16LV (and SS16LVC) 1600 Peak Amp Jump Starter is designed to be charged via a standard USB-C input port. Because it uses a universal USB-C connection, you have several options for replacing a defective cord:Standard USB-C Cable: You can use any high-quality USB Type-A to USB Type-C or USB Type-C to USB Type-C cable.AC Adapter: The unit originally comes with an AC charger that connects to the USB cable. You can use a standard 5V USB wall masonry (like a smartphone charger), though a higher amperage charger (such as 2.1A or 3.1A) will charge the unit faster.Manufacturer Support: For official replacement parts specifically from the manufacturer, you should contact Baccus Global LLC, as they handle the warranty and support for VECTOR products. You can also check the official VECTOR Store on Amazon.To charge the unit with a new cable: Plug the USB-C end into the jump starter's input port (located under the protective flap) and the other end into your AC or DC USB adapter. The blue LED lights will flash to indicate charging and stay solid when the unit is full.

VECTOR SS16LV 1600 Peak Amp Lithium Jump Starter User Manual

pengenalan

The VECTOR SS16LV 1600 Peak Amp Li-Ion Jump Starter Portable is a compact and powerful device designed for jump-starting vehicles and charging mobile devices. It features integrated reverse polarity protection for safe operation and a built-in work light for convenience in low-light conditions. Its lithium-ion battery can hold a charge for up to 12 months, making it a reliable emergency tool.

VECTOR SS16LV Jump Starter with attached clamps

Figure 1: The VECTOR SS16LV 1600 Peak Amp Lithium Jump Starter with its heavy-duty powder-coated clamps.

Maklumat Keselamatan

Always read and understand all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

Jauhkan daripada kanak-kanak.
Jangan dedahkan jump starter kepada hujan atau keadaan basah.
Ensure proper polarity connection to avoid damage to the device or vehicle. The Engine Start Smart Controller provides reverse polarity protection.
Jangan buka unit ini. Rujuk semua servis kepada kakitangan servis yang berkelayakan.
Simpan di tempat yang sejuk dan kering apabila tidak digunakan.

Figure 2: The Reverse Polarity Alarm feature ensures safe connections.

Apa yang ada dalam Kotak

Pastikan semua komponen berada dalam keadaan baik dan lengkap:

VECTOR SS16LV Lithium Jump Starter Unit
Smart Controller with Powder Coated Metal Clamps (Merah dan Hitam)
Pengecas AC
Pengecas DC
Kabel Pengecas USB

Contents of the VECTOR SS16LV box including jump starter, smart controller, clamps, AC and DC chargers, and USB cable.

Figure 3: Included components: Jump Starter, Smart Controller, AC and DC Chargers, and USB Charging Cable.

Ciri-ciri Produk

1600 puncak Amps: Instantly jump starts cars and trucks up to 8-cylinders.
Pengecas USB: Equipped with USB Type-A & Type-C (3.1 Amp) ports for charging mobile devices.
Bateri Litium Boleh Dicas semula: Retains charge for up to 12 months. Comes with AC, DC, and USB adapters for versatile recharging.
Operasi Selamat: The Engine Start Smart Controller provides reverse polarity protection, ensuring correct jumper cable connection.
Reka Bentuk Mudah Alih: Compact size (3"D x 1"W x 7"H) and lightweight (12.8 ounces) for easy storage and transport.
Lampu Kerja LED: Built-in LED light assists in dark environments.

Icons representing features: Lithium Rechargeable, LED Work Light, Type-C USB Port, Type-A USB Port, Up to 30x Jump Starts, Works with V8 Engines.

Figure 4: Key features of the SS16LV Jump Starter.

Dimensions of the jump starter (3 inches deep, 7 inches high) and its weight (0.86 lbs).

Figure 5: Compact dimensions and lightweight design for portability.

Terperinci view of the VECTOR SS16LV jump starter with labels for Power Button, Smart Controller, Powder Coated Metal Clamps, LED Light, 3.1A USB-A & Type-C Ports, AC and DC Chargers, and USB Charging Cable.

Figure 6: Labeled components of the SS16LV unit and accessories.

sebelah view of the VECTOR SS16LV jump starter showing the input/output ports covered by a red flap.

Rajah 7: Sisi view showing the protected input/output ports.

Persediaan

Caj Permulaan

Before first use, fully charge the VECTOR SS16LV jump starter. The unit comes partially charged from the factory.

Connect the provided AC charger to a standard wall outlet.
Plug the USB charging cable into the AC charger and then into the USB-C input port on the jump starter.
The blue LED indicator lights on the jump starter will illuminate and flash to indicate charging. All three lights will be solid blue when fully charged.
Alternatively, use the DC charger to charge the unit from a vehicle's 12V accessory outlet.

It is recommended to recharge the unit every 3-6 months to maintain optimal battery health, especially if not used regularly.

Arahan Operasi

Lompat Memulakan Kenderaan

The VECTOR SS16LV is designed to jump start vehicles with up to 8-cylinder engines.

Pastikan pemula lompat dicas sepenuhnya.
Connect the Smart Controller's plug into the jump starter's dedicated port (usually covered by a red flap).
Sambungkan cl merah (+).amp ke terminal positif (+) bateri kenderaan.
Sambungkan cl hitam (-).amp to the negative (-) terminal of the vehicle's battery or a solid, unpainted metal part of the vehicle's chassis away from the battery.
Observe the indicator light on the Smart Controller. A solid green light indicates a correct connection and readiness to start. If a red light or alarm sounds, check connections for reverse polarity.
Mulakan kenderaan.
Once the vehicle starts, immediately disconnect the clamps from the vehicle battery, first the black (-) clamp, maka cl merah (+)amp.
Disconnect the Smart Controller from the jump starter.

Using as a Power Bank (USB Charging)

The SS16LV can charge various USB-powered devices.

Open the protective flap covering the USB ports on the jump starter.
Connect your device's USB charging cable to either the USB Type-A or USB Type-C (3.1 Amp) port on the jump starter.
Sambungkan hujung kabel yang lain ke peranti mudah alih anda.
Press the power button on the jump starter to begin charging. The blue LED lights indicate the remaining battery level.
Putuskan sambungan peranti anda setelah pengecasan selesai.

A hand plugging a USB cable into a smartphone, with the VECTOR jump starter in the background, indicating its use as a power bank.

Figure 8: Charging a mobile device using the USB port.

Menggunakan Lampu Kerja LED

The built-in LED work light provides illumination in dark conditions.

Press the power button once to check the battery level (blue LEDs).
Press the power button a second time to turn on the LED work light.
Press the power button a third time to activate the SOS flash mode.
Press the power button a fourth time to activate the strobe light mode.
Press the power button a fifth time to turn off the light.

Close-up of the VECTOR jump starter's end showing the bright LED work light illuminated.

Figure 9: The integrated LED work light provides illumination.

Penyelenggaraan

Pembersihan: Lap unit dengan kain kering dan lembut. Jangan gunakan pembersih atau pelarut yang melelas.
Storan: Store the jump starter in a cool, dry place away from direct sunlight and moisture. Ensure it is fully charged before storing for extended periods.
Penjagaan Bateri: Recharge the unit every 3-6 months to prolong battery life, even if not used.

Menyelesaikan masalah

Masalah	Kemungkinan Punca	Penyelesaian
Pemula lompat tidak dihidupkan.	Bateri habis sepenuhnya.	Charge the jump starter fully using the provided AC or DC charger.
Kenderaan tidak boleh dihidupkan semula (jump start).	cl yang salahamp sambungan (kekutuban songsang). Bateri kenderaan rosak teruk. Bateri pemula lompat rendah.	Ensure correct positive (+) and negative (-) connections; the Smart Controller will indicate errors. Check jump starter battery level and recharge if necessary. Consult a professional if vehicle battery is faulty.
Peranti USB tidak dicas.	Jump starter is off. Kabel USB rosak. Peranti tidak serasi.	Press the power button to activate USB output. Try a different USB cable. Ensure your device is compatible with USB charging.
LED work light not working.	Jump starter is off. Bateri habis sepenuhnya.	Press the power button multiple times to cycle through light modes. Charge the jump starter.

Spesifikasi

model: SS16LV
Jenama: VEKTOR
Arus Keluaran Puncak: 1600 Amps
Amppemadaman: 1600 Amps
Dimensi Produk: 3"D x 1"W x 7"H
Berat Barang: 12.8 auns
Jenis Bateri: Litium Ion (1 diperlukan)
Output USB: USB Type-A & Type-C (3.1 Amps)
Pengeluar: Baccus Global LLC
UPC: 814632015246

Waranti dan Sokongan

Untuk maklumat jaminan atau sokongan teknikal, sila rujuk kepada pihak berkuasa rasmi pengeluar webtapak atau hubungi perkhidmatan pelanggan mereka. Simpan resit pembelian anda sebagai bukti pembelian.

Pengeluar: Baccus Global LLC

Untuk bantuan lanjut, lawati VECTOR Store on Amazon.

VECTOR SS16LV