Varmilo VPE87
Varmilo VPE87 Chang'e TKL Mechanical Keyboard User Manual
Model: VPE87
pengenalan
The Varmilo VPE87 TKL mechanical keyboard is designed for versatility and a premium typing experience. It features triple-mode connectivity (wired, Bluetooth, and 2.4 GHz wireless), hotswap sockets for switch customization, and a white LED backlight. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your keyboard.
Kandungan Pakej
- Varmilo VPE87 Mechanical Keyboard
- Kabel USB-C
- 2.4 GHz Wireless Receiver (typically stored in keyboard)
- Penarik Penutup Kunci (mungkin disertakan)
- Penarik Suis (mungkin disertakan)
Persediaan
Before using your Varmilo VPE87 keyboard, please follow these steps to set it up.
1. Physical Connection and Initial Charge

Image: USB-C port and 3-way cord channel. The USB-C port is located on the back of the keyboard, designed to allow the cable to exit from the left, right, or center for tidy cable management.
- Sambungkan kabel USB-C yang disediakan ke port USB-C papan kekunci.
- Connect the other end of the USB-C cable to an available USB port on your computer or a USB power adapter.
- For wireless use, ensure the keyboard is sufficiently charged. The white LED backlight will indicate charging status (specific indicator behavior may vary, refer to LED section).
2. Melaraskan Sudut Papan Kekunci

Imej: Side profile with kickstand extended. The keyboard features a 2-step kickstand on the underside, allowing users to adjust the typing angle for ergonomic comfort.
The VPE87 features a 2-step kickstand on its underside. Gently flip out the kickstands to adjust the keyboard's angle to your preferred typing position.
Arahan Operasi
Mod Kesambungan
The Varmilo VPE87 supports three connectivity modes: Wired, Bluetooth, and 2.4 GHz Wireless. You can switch between modes using the dedicated switch or key combinations, typically located on the back or side of the keyboard.
Mod Berwayar
- Sambungkan kabel USB-C dari papan kekunci ke komputer anda.
- Papan kekunci akan dikenali secara automatik oleh sistem pengendalian anda.
- This mode also charges the keyboard's internal battery.
Mod Bluetooth
- Ensure the keyboard is in Bluetooth mode (check the switch on the back/side).
- Pada peranti anda (komputer, tablet, telefon pintar), dayakan Bluetooth dan cari peranti baharu.
- Select "Varmilo VPE87" (or similar name) from the list of available devices.
- Follow any on-screen prompts to complete pairing. The keyboard may support multiple Bluetooth profiles (e.g., Fn + 1, 2, 3 for different devices). Refer to specific key combinations for your model.
Mod Wayarles 2.4 GHz
- Locate the 2.4 GHz USB receiver (often stored in a compartment on the keyboard's underside).
- Palamkan penerima USB ke dalam port USB yang tersedia pada komputer anda.
- Ensure the keyboard is in 2.4 GHz wireless mode (check the switch on the back/side).
- Papan kekunci harus bersambung secara automatik ke penerima.
Kawalan Lampu Latar

Image: Keyboard with white LED backlight. The white LED backlight enhances visibility of the keycaps, especially in low-light conditions.
The VPE87 features a white LED backlight. Use the following key combinations to control the backlight:
- Fn + Arrow Up: Tingkatkan kecerahan lampu latar.
- Fn + Arrow Down: Decrease backlight brightness / Turn off backlight.
- Fn + Other Keys: (Specific to model) May control backlight effects or modes. Refer to the keyboard's keycap legends for additional functions.
Hotswap Sockets (Switch Customization)

Imej: Atas view of the Varmilo VPE87 keyboard. This image displays the keyboard's layout and the artistic design on its keycaps and case, highlighting its aesthetic appeal.
The VPE87 is equipped with hotswap sockets, allowing you to change mechanical switches without soldering. This enables customization of your typing feel.
- Alih keluar Keycap: Use a keycap puller to gently remove the desired keycap.
- Alih Keluar Suis: Use a switch puller to carefully grip the top and bottom clips of the switch and pull it straight up.
- Masukkan Suis Baharu: Align the pins of the new switch with the holes in the hotswap socket. Gently push the switch straight down until it clicks into place. Ensure pins are not bent.
- Gantikan Kekunci: Letakkan kembali penutup kekunci pada suis baharu.
Note: Ensure the keyboard is disconnected or powered off before swapping switches. Use compatible 3-pin or 5-pin mechanical switches.
Ciri-ciri lain
- Double-layer Silicone Sound Absorption: This design minimizes typing noise for a quieter experience.
- 3-Way Cord Channel: The USB-C cable can be routed from the left, right, or center of the keyboard's underside for neat cable management.
Penyelenggaraan
Proper maintenance ensures the longevity and performance of your Varmilo VPE87 keyboard.
- Membersihkan Kap Kunci:
- Use a keycap puller to remove keycaps.
- Wipe keycaps with a damp kain dan larutan sabun lembut. Elakkan bahan kimia yang keras.
- Ensure keycaps are completely dry before reattaching.
- Membersihkan Badan Papan Kekunci:
- Gunakan kain lembut dan kering untuk mengelap permukaan papan kekunci.
- Untuk habuk dan serpihan di antara kunci, gunakan udara termampat.
- Storan: Simpan papan kekunci di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
- Tumpahan cecair: In case of a liquid spill, immediately disconnect the keyboard, turn it upside down to drain, and allow it to dry completely for at least 24-48 hours before attempting to use it again. Do not use a hairdryer or heat gun.
Menyelesaikan masalah
If you encounter issues with your Varmilo VPE87 keyboard, try the following solutions:
| Masalah | Penyelesaian |
|---|---|
| Keyboard not responding in Wired Mode. |
|
| Tidak dapat menyambung melalui Bluetooth. |
|
| 2.4 GHz wireless connection is unstable or not working. |
|
| Backlight is not working or dim. |
|
| A specific key is not registering. |
|
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Varmilo |
| Model | VPE87 |
| Penerangan Papan Kekunci | mekanikal |
| Teknologi Ketersambungan | Bluetooth, USB-C (Wired), 2.4 GHz Wireless |
| Bilangan Kunci | 87 |
| Pencahayaan latar | White LED (Single Color) |
| Ciri Khas | Backlit, Wireless connectivity, Hotswap Sockets, 2-step Kickstand, Double-layer Silicone Sound Absorption, 3-way Cord Channel |
| Peranti Serasi | Komputer riba, PC, Telefon Pintar, Tablet |
| Color (Switches) | Kailh Prestige Clicky (as per product listing) |
Waranti dan Sokongan
Varmilo products are designed for quality and durability. For specific warranty information, please refer to the warranty card included with your product or visit the official Varmilo webtapak.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Varmilo customer service through their official channels. You can often find support contact information on the brand's official webtapak atau melalui peruncit tempat anda membeli produk tersebut.
Visit the official Varmilo Store for more information: Varmilo Store on Amazon
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.