1. Pengenalan
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your SHA CERLIN Queen Size Metal Bed Frame. Please read all instructions carefully before assembly and retain this manual for future reference.
The SHA CERLIN Queen Size Metal Bed Frame features a vintage circular design headboard and footboard, designed for stability and ease of use. It does not require a box spring and is engineered for noise-free operation.
2. Maklumat Keselamatan
- Sentiasa pasang rangka katil di atas permukaan yang lembut dan bersih untuk mengelakkan kerosakan pada produk atau lantai anda.
- Pastikan semua bolt dan skru diketatkan dengan kukuh sebelum digunakan. Periksa dan ketatkan semula pengikat secara berkala.
- Jangan melebihi kapasiti berat maksimum 362.87 kg (800 lbs).
- Jauhkan bahagian kecil daripada kanak-kanak semasa pemasangan untuk mengelakkan bahaya tercekik.
- Jangan berdiri atau melompat di atas rangka katil.
- Use only the components provided by the manufacturer. Substituting parts may compromise safety and void the warranty.
3. Kandungan Pakej
Sebelum memulakan pemasangan, sahkan bahawa semua komponen yang disenaraikan di bawah ada dan tidak rosak. Jika mana-mana bahagian yang hilang atau rosak, sila hubungi sokongan pelanggan.
- Kepala katil
- Papan Kaki
- Rel Sisi
- Sokong Kaki
- Bilah
- Pek Perkakasan (bolt, pencuci, nat, sepana Allen)
- Manual Pemasangan (dokumen ini)
4. Arahan Persediaan dan Pemasangan
Assembly is designed to be straightforward and can typically be completed by one person in approximately 30 minutes. Follow these steps carefully:
- Buka Pembungkusan Komponen: Carefully remove all parts from the packaging and lay them out on a soft, clean surface. Identify each component using the parts list provided in your hardware pack.
- Pasang Rel Sisi pada Kepala katil: Connect the side rails to the headboard using the provided bolts and Allen wrench. Do not fully tighten bolts at this stage.
- Pasang Rel Sisi pada Papan Kaki: Connect the other end of the side rails to the footboard. Ensure the circular design elements align correctly. Again, do not fully tighten bolts yet.
- Pasang Kaki Sokongan Pusat: Attach any center support legs to the designated points on the frame.
- Masukkan Bilah: Place the metal slats into the designated slots or attach them to the side rails. Ensure they are evenly spaced and securely fastened. The bed frame features an embedded design to prevent mattress sliding.
- Pengetatan Akhir: Once all components are in place and aligned, systematically tighten all bolts and screws until secure. Do not overtighten.
Image: Visual representation of assembly features, including easy assembly points, noise-free foam pads on slats, and strong slat support for the mattress.
Image: Illustration showing the recommended mattress height range of 8 to 14 inches and the embedded design feature that prevents mattress sliding.
5. Arahan Operasi (Penggunaan)
Your SHA CERLIN Queen Size Metal Bed Frame is designed for immediate use after proper assembly.
- Peletakan tilam: Place your queen-size mattress directly onto the assembled slats. A box spring is not required. The embedded design helps keep the mattress in place.
- Recommended Mattress Height: For optimal aesthetics and comfort, a mattress height between 8 and 14 inches is recommended.
- Storan Bawah Katil: The bed frame provides approximately 12.4 inches of clearance underneath, offering ample space for storage bins or other items to help keep your room tidy.
Imej: A view of the bed frame demonstrating the 12.4-inch under-bed clearance, suitable for storing items in baskets.
6. Penyelenggaraan
Penjagaan yang betul akan memastikan jangka hayat dan penampilan rangka katil anda.
- Pembersihan: Lap bingkai logam dengan iklanamp kain. Elakkan menggunakan bahan kimia yang keras atau pembersih yang kasar, kerana ini boleh merosakkan kemasan.
- Pemeriksaan Berkala: Periodically check all bolts and connections to ensure they remain tight. Re-tighten as necessary to maintain stability and prevent noise.
- Pencegahan Bunyi: The bed frame is designed with silent pads on each metal bar to minimize noise. If any squeaking occurs, inspect the connections and ensure all parts are securely fastened.
7. Penyelesaian masalah
Rujuk bahagian ini untuk isu biasa dan penyelesaiannya.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Rangka katil goyah atau tidak stabil. | Bolt longgar atau pemasangan yang salah. | Check all bolts and connections; tighten securely. Review assembly steps to ensure correct installation. |
| Bunyi-bunyi berdecit. | Loose connections, friction between metal parts, or missing silent pads. | Tighten all bolts. Ensure silent pads are correctly placed on all metal contact points. If pads are missing, contact customer support. |
| Tilam gelongsor pada bingkai. | Mattress not properly seated or embedded design not utilized. | Ensure the mattress is fully within the frame's embedded design. If the issue persists, consider a non-slip mattress pad. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama: | SHA CERLIN |
| Nombor Model: | xh0114-7 |
| Saiz: | Ratu |
| Bahan: | logam |
| warna: | coklat |
| Dimensi Produk (L x W x H): | 2.07m x 1.55m x 1.12m (81.5" x 61.02" x 44.09") |
| Pelepasan Bawah Katil: | lebih kurang 12.4 inci |
| Kapasiti Berat Maksimum: | 362.87 kg (800 lbs) |
| Perhimpunan Diperlukan: | ya |
| Ciri Khas: | Vintage Circular Design, No Box Spring Needed, Noise-Free, Fade Resistant, Squeak Resistant |
| Arahan Penjagaan: | Lap dengan Damp kain |
Image: Technical drawing displaying the dimensions of the Queen Size Metal Bed Frame, including length, width, and height measurements for the headboard, footboard, and overall frame.
9. Waranti dan Sokongan
For warranty information or customer support, please refer to the purchase documentation or contact SHA CERLIN directly through their official website or the retailer where the product was purchased. Please have your model number (xh0114-7) and proof of purchase available when contacting support.