Manual Pengguna Robot Vakum dan Mop ROIDMI EVE CC

pengenalan

The ROIDMI EVE CC Robot Vacuum and Mop is an advanced cleaning device designed to automate floor maintenance. It combines powerful vacuuming with efficient mopping capabilities, featuring intelligent navigation and a self-emptying dustbin for enhanced convenience.

Panduan Persediaan

1. Menyahkotak dan Semakan Komponen

Keluarkan semua komponen dari pembungkusan dengan berhati-hati. Pastikan item berikut ada:

• ROIDMI EVE CC Robot Vacuum and Mop
• Auto-Emptying Station
• Kabel Kuasa
• Side Brush (if not pre-installed)
• Pad Mop dan Tangki Air
• Manual Pengguna (dokumen ini)

2. Penempatan Stesen Pengecasan

Place the auto-emptying station against a wall in an open area, ensuring at least 0.5 meters of clear space on both sides and 1.5 meters in front. Avoid placing it near stairs or heat sources. Connect the power cable to the station and plug it into a wall outlet.

3. Pengecasan Awal

Place the robot onto the charging station. Ensure the charging contacts align. The robot will begin charging automatically. For first use, fully charge the robot, which may take several hours.

Image: The ROIDMI EVE CC robot vacuum docked with its auto-emptying station, alongside a smartphone displaying the control app interface.

4. Pemasangan Apl dan Berpasangan

Download the ROIDMI or Mijia app from your device's app store. Follow the in-app instructions to create an account and pair your ROIDMI EVE CC robot. This will enable smart control features, including mapping, scheduling, and cleaning mode selection.

Arahan Operasi

1. Mod Pembersihan

The ROIDMI EVE CC offers versatile cleaning modes:

• Memvakum: Utilizes 4000 Pa suction power to effectively pick up dust, debris, pet hair, and fine particles from various floor types.
• Mengemop: The integrated 250ml water tank and mop pad allow for simultaneous sweeping and mopping, providing a deeper clean for hard floors.
• Sweep & Mop 2-in-1: This combined mode allows the robot to vacuum and mop concurrently, optimizing cleaning efficiency.

Image: The robot vacuum demonstrating its powerful 4000 Pa suction, capable of collecting various types of debris including dust, hair, crumbs, cat litter, and pet food.

2. LDS Laser Navigation

Equipped with a new generation LDS laser navigation system, the robot precisely scans your home environment to create accurate maps. This technology enables efficient route planning, obstacle avoidance, and prevents entanglement or pinching.

Image: The robot vacuum utilizing its LDS laser navigation system to intelligently map and navigate a living room environment, ensuring comprehensive coverage.

3. Automatic Dust Collection

The 2.5-liter auto-emptying station automatically transfers collected dirt from the robot's dustbin into a sealed dust bag, providing up to 60 days of hands-free operation. This system includes an antibacterial and deodorizing ozone technology to minimize odors.

Image: The auto-emptying station of the ROIDMI EVE CC, highlighting its 2.5L large capacity dust bag for extended hands-free operation.

4. Kawalan Aplikasi Pintar

Control your robot remotely via the ROIDMI or Mijia app. Features include:

• Quick and accurate map creation (within 5 minutes).
• Customized cleaning plans and scheduled cleaning.
• Setting virtual walls and restricted zones to prevent the robot from entering specific areas.
• Monitoring cleaning progress and history.

Image: The ROIDMI EVE CC robot vacuum alongside a smartphone displaying the app interface, which allows for quick mapping and intelligent control of cleaning parameters.

Image: Demonstration of the virtual wall feature, allowing users to define restricted areas that the robot will avoid during cleaning.

5. Obstacle Avoidance and Fall Prevention

The robot is designed to accurately identify obstacle shapes and make decisions to avoid them, reducing the risk of entanglement. It also features fall prevention sensors to detect stairs and prevent falls.

Image: The robot vacuum performing edge cleaning along a wall and demonstrating its fall prevention capabilities near a step, along with its ability to climb obstacles up to 17mm.

Penyelenggaraan

Regular maintenance ensures optimal performance and extends the lifespan of your ROIDMI EVE CC. Always turn off the robot and disconnect the charging station from power before performing any maintenance.

1. Penggantian Beg Habuk

The 2.5L dust bag in the auto-emptying station should be replaced approximately every 60 days, or when the app indicates it is full. Open the station's lid, remove the full bag, and insert a new one, ensuring it is properly sealed.

2. Water Tank and Mop Pad Cleaning

After each mopping session, remove the mop pad and wash it thoroughly. Empty any remaining water from the 250ml water tank and allow it to air dry to prevent mold or odors.

3. Pembersihan Berus Utama dan Berus Sisi

Regularly check the main brush and side brush for tangled hair or debris. Use the cleaning tool provided to cut and remove any tangled hair. Ensure the brushes spin freely.

4. HEPA Filter Cleaning

Tap the HEPA filter gently to remove accumulated dust. Do not wash the HEPA filter with water, as this can damage it. Replace the filter every 3-6 months depending on usage.

5. Pembersihan Sensor

Wipe all sensors (cliff sensors, wall sensors, charging contacts) on the robot and charging station with a clean, dry cloth to ensure proper functionality and navigation.

Menyelesaikan masalah

If you encounter issues with your ROIDMI EVE CC, refer to the following common solutions:

• Robot tidak mengecas: Ensure the charging contacts on both the robot and station are clean and aligned. Check if the power cable is securely plugged in.
• Robot tersekat atau hilang: Clear any obstacles around the robot. If it's lost, manually place it back on the charging station or restart it from the app.
• Sedutan yang lemah: Check if the dustbin is full or the dust bag needs replacement. Clean the main brush and HEPA filter.
• Mengemop tidak berkesan: Ensure the water tank is filled and the mop pad is clean and properly attached.
• Isu sambungan apl: Ensure your Wi-Fi network is stable and the robot is within range. Restart the app and the robot.

For more detailed troubleshooting or persistent issues, consult the ROIDMI app's help section or visit the official ROIDMI support webtapak.

Spesifikasi

Waranti dan Sokongan

For warranty information, please refer to the warranty card included with your product or visit the official ROIDMI website. Information regarding spare parts availability may vary by region.

For technical support, product inquiries, or service requests, please contact ROIDMI customer service through their official webtapak atau maklumat hubungan yang diberikan dalam pembungkusan produk.