BONTEC Single Monitor Arm Desk Mount User Manual

1. Pengenalan

Thank you for choosing the BONTEC Single Monitor Arm Desk Mount. This product is designed to enhance your workspace ergonomics and efficiency by providing a flexible and stable mounting solution for your monitor. This manual provides detailed instructions for safe installation, operation, and maintenance of your monitor arm. Please read it thoroughly before beginning installation and keep it for future reference.

Gambar 1: Lebihview of the BONTEC Single Monitor Arm Desk Mount, showcasing its adjustable arm and dual mounting options (C-clamp and grommet base).

2. Maklumat Keselamatan

Sila patuhi langkah berjaga-jaga keselamatan berikut untuk mengelakkan kecederaan atau kerosakan pada peralatan anda:

• Kapasiti Berat: Do not exceed the maximum weight capacity of 19.8 lbs (9 kg). Overloading can cause instability and potential damage.
• Saiz Skrin: This mount is designed for screens between 13 and 34 inches.
• Keserasian VESA: Ensure your monitor has VESA 75x75mm or 100x100mm mounting holes.
• Ketebalan Meja: Verify your desk thickness is within the specified range for C-clamp (0.39" to 3.35" / 10mm to 85mm) or Grommet base (0.39" to 3.35" / 10mm to 85mm, hole diameter 0.39" to 2.36" / 10mm to 60mm).
• Perhimpunan: Assemble the product exactly as instructed. Improper assembly can lead to product failure.
• Bahagian bergerak: Be aware of pinch points when adjusting the arm. Keep hands clear of moving parts.
• Spring Gas: The gas spring is under high pressure. Do not attempt to disassemble it. Adjust tension carefully as per instructions.

3. Kandungan Pakej

Please check that all components are present and undamaged before installation. If any parts are missing or damaged, contact BONTEC customer support.

• Perhimpunan Lengan Monitor
• Meja Clamp Pangkalan
• Komponen Asas Grommet
• Plat VESA
• Kit Perkakasan (skru, pencuci, kunci Allen)
• Manual Arahan

4. Spesifikasi

Figure 2: The monitor arm is compatible with screens from 13 to 34 inches and supports up to 19.8 lbs, featuring VESA 75x75mm and 100x100mm patterns.

5. Persediaan dan Pemasangan

The BONTEC monitor arm offers two installation methods: C-clamp and Grommet base. Choose the method best suited for your desk.

5.1 Pilih Pilihan Pemasangan Anda

Figure 3: Illustration of the two available installation methods: Desk Clamp (C-clamp) and Grommet Base, along with their respective desk thickness and hole diameter requirements.

5.1.1 C-Clamp Pemasangan

1. Pasangkan C-clamp to the main pole of the monitor arm.
2. Letakkan C-clamp on the edge of your desk, ensuring it is stable and secure.
3. Ketatkan clamp screw until the mount is firmly attached to the desk. The C-clamp includes silicone sleeves and an EVA pad to protect your desk surface.

5.1.2 Pemasangan Tapak Grommet

1. If your desk has a grommet hole, insert the grommet base components through the hole.
2. Secure the grommet base from underneath the desk using the provided hardware.
3. Attach the main pole of the monitor arm to the secured grommet base.

5.2 Memasang Monitor

The VESA plate is detachable for easy monitor attachment.

Figure 4: Step-by-step guide for attaching the VESA plate to your monitor and then securely mounting it onto the monitor arm. Hand screws are used for convenience.

1. Remove the VESA plate from the monitor arm by lifting it up.
2. Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm).
3. Secure the VESA plate to the monitor using the appropriate screws from the hardware kit. Hand screws are provided for easy installation without a screwdriver.
4. Carefully slide the monitor with the attached VESA plate onto the monitor arm until it clicks securely into place.

6. Arahan Operasi

The BONTEC monitor arm features a gas spring system for smooth and effortless adjustments.

6.1 Melaraskan Kedudukan Monitor

Figure 5: The monitor arm offers extensive flexibility with ±90° tilt, ±90° swivel, and full 360° rotation for optimal viewsudut-sudut.

• Condong: Gently push or pull the top or bottom of your monitor to achieve the desired vertical angle (±90°).
• Pusing: Rotate the monitor horizontally to adjust the viewing angle left or right (±90°).
• Putaran: Putar monitor 360° untuk bertukar antara orientasi landskap dan potret.
• Pelarasan Ketinggian: The gas spring arm allows you to effortlessly raise or lower your monitor to your preferred ergonomic height, up to a maximum of 25 inches from the tabletop.
• Sambungan: Extend or retract the arm to adjust the distance of your monitor from your eyes, up to a maximum extension of 22.44 inches.

Figure 6: The monitor arm facilitates easy transition between sitting and standing positions, promoting ergonomic posture and reducing strain during long work sessions.

6.2 Adjusting Gas Spring Tension

The gas spring tension may need adjustment to properly support your monitor's weight. The arm features a robust 750 N·m gas spring.

Figure 7: The monitor arm is equipped with a powerful 750 N·m gas spring, ensuring stable and smooth adjustments for monitors up to 19.8 lbs.

1. If the monitor sags or does not stay in position, increase the tension. Use the provided Allen key to turn the adjustment screw (usually located on the arm near the VESA plate or main pole) clockwise.
2. If the monitor floats up or is difficult to push down, decrease the tension. Turn the adjustment screw counter-clockwise.
3. Adjust gradually and test the arm's movement until the monitor stays in place at any desired height.

6.3 Pengurusan Kabel

The monitor arm includes integrated cable management clips to keep your workspace tidy.

Figure 8: Utilize the built-in cable management system to route and conceal monitor cables, reducing clutter and maintaining a clean, organized desk.

Route your display and power cables through the clips or channels along the arm to maintain a clean and organized workspace.

7. Penyelenggaraan

Regular maintenance ensures the longevity and optimal performance of your monitor arm.

• Pembersihan: Wipe the arm with a soft, damp kain. Elakkan pembersih atau pelarut yang melelas yang boleh merosakkan kemasan.
• Pemeriksaan: Periodically check all screws and connections to ensure they are tight and secure. Retighten if necessary.
• Spring Gas: The gas spring is maintenance-free. Do not attempt to lubricate or disassemble it.

8. Penyelesaian masalah

If you encounter issues with your monitor arm, refer to the following common problems and solutions:

• Monitor Sags or Does Not Stay Up:
  • The monitor may be too heavy for the current gas spring tension. Increase the gas spring tension by turning the adjustment screw clockwise.
  • Ensure the monitor's weight is within the specified range (6.6 - 19.8 lbs).
• Monitor Floats Up or is Difficult to Push Down:
  • The gas spring tension is too high for the monitor's weight. Decrease the gas spring tension by turning the adjustment screw counter-clockwise.
• Arm is Loose or Wobbly:
  • Check all mounting screws (C-clamp/grommet base and VESA plate) and tighten them securely.
  • Ensure the desk surface is stable and thick enough for the chosen mounting method.
• Monitor Does Not Tilt/Swivel Smoothly:
  • Check for any obstructions.
  • Ensure all pivot points are free of debris. Do not lubricate.

9. Waranti dan Sokongan

BONTEC products are manufactured with high-quality materials and craftsmanship. For any questions, concerns, or warranty claims, please contact BONTEC customer support through the retailer where you purchased the product or visit the official BONTEC webtapak untuk maklumat hubungan.

Please have your model number (GDM7503) and purchase details ready when contacting support.