DSP Hair Clipper and Trimmer Kit Instruction Manual

1. Pengenalan

Thank you for choosing the DSP Hair Clipper and Trimmer Kit. This professional barber set is designed for versatile hair and beard cutting, offering precision and convenience for both professional barbers and home users. This manual provides essential information for the safe and effective use of your new grooming tools.

2. Maklumat Keselamatan

Please read all safety instructions carefully before use.

• Sentiasa cabut plag peranti sebelum membersihkan.
• Jangan gunakan berhampiran air atau dalam keadaan basah.
• Jauhkan daripada sumber haba.
• Jangan gunakan semasa tidur atau tidak sedarkan diri.
• Jauhkan daripada kanak-kanak.
• Ensure the device is fully charged before use to prevent pulling hair.

3. Kandungan Pakej

Your DSP Hair Clipper and Trimmer Kit includes the following items:

• 1 x Professional Hair Clipper (Model 91208)
• 1 x Precision Detail Trimmer (Model 91209)
• 4 x Clipper Guide Combs (3mm, 6mm, 10mm, 13mm)
• 3 x Trimmer Guide Combs (1.5mm, 3.0mm, 4.5mm)
• 1 x Hair Cutting Scissors
• 1 x Hair Thinning Scissors
• 1 x Haircut Cape
• 1 x Berus Pembersih
• 1 x Blade Oil
• 2 x Kabel Caj USB
• 2 x Manual Arahan

Image: The complete DSP Hair Clipper and Trimmer Kit, showcasing both devices, various guide combs, scissors, cape, and maintenance accessories.

4. Produk Lebihview

Professional Hair Clipper (Model 91208)

• Operasi tanpa wayar: Offers freedom of movement.
• Jangka Panjang: Up to 210 minutes (3.5 hours) of continuous use.
• Caj Cepat: Mengecas penuh dalam masa lebih kurang 3 jam.
• Paparan led: Shows battery level and lubrication reminders.
• Motor berkuasa: Equipped with a durable copper motor for superior performance.
• Bilah boleh laras: Side lever for precise cutting length adjustments (0.8mm to 2.0mm).

Image: DSP Hair Clipper (Model 91208) with its adjustable blade and various guide comb sizes.

Precision Detail Trimmer (Model 91209)

• Reka bentuk tanpa wayar: Ideal for detailing and edging.
• Masa Jalan Dilanjutkan: Provides up to 120 minutes (2 hours) of use.
• Pengecasan yang cekap: Reaches full charge in about 2.5 hours.
• Paparan led: Indicates battery status and oiling needs.
• T-Blade: Designed for zero-gap precision, perfect for fades and intricate designs.

Image: DSP Precision Detail Trimmer (Model 91209) highlighting its T-blade for precise trimming.

Image: Close-up of the LED display on a DSP device, indicating battery percentage and a reminder to oil the blades.

5. Persediaan

1. Bongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
2. Caj Permulaan: Before first use, fully charge both the clipper and trimmer using the provided USB cables. The LED display will indicate charging progress and full charge.
   • Clipper (Model 91208): Approximately 3 hours.
   • Trimmer (Model 91209): Approximately 2.5 hours.
3. Bilah Minyak: Apply 2-3 drops of the included blade oil to the blades of both devices. Turn on the devices for a few seconds to distribute the oil, then wipe off any excess.
4. Pasang Sisir Panduan: Select the desired guide comb and securely snap it onto the blade of the clipper or trimmer. Ensure it is firmly attached before use.

6. Arahan Operasi

6.1 Operasi Am

• Hidupkan/Mati Kuasa: Use the power switch located on the side of each device to turn it on or off.
• Paparan led: Monitor the battery level and oil reminder on the LED screen during use.

6.2 Using the Hair Clipper (Model 91208)

1. Pilih Sikat: Choose the appropriate guide comb for your desired hair length.
2. Adjust Blade: Use the side lever to fine-tune the cutting length from 0.8mm to 2.0mm for blending and fading.
3. Memotong Rambut: Hold the clipper with the blade teeth pointing upwards. Start cutting from the bottom of the head, moving upwards against the direction of hair growth. Use smooth, overlapping strokes.

6.3 Using the Precision Detail Trimmer (Model 91209)

1. Pilih Sikat: For beard trimming or longer detailing, attach one of the 1.5mm, 3.0mm, or 4.5mm guide combs. For zero-gap precision, use without a comb.
2. Edging and Detailing: Use the T-blade for creating sharp lines around the neckline, sideburns, and beard. Hold the trimmer at a slight angle and use light pressure.
3. Pemangkasan Janggut: Move the trimmer in the direction of hair growth for a uniform trim, or against for a closer cut.

7. Penyelenggaraan

1. Bilah Bersih: After each use, turn off and unplug the device. Use the cleaning brush to remove any loose hair from the blades.
2. Bilah Minyak: Regularly apply 2-3 drops of blade oil to the blades. This is crucial for maintaining blade sharpness and preventing hair pulling. The LED display will remind you when lubrication is needed.
3. Simpan dengan Betul: Store the clipper and trimmer in a dry, cool place, away from direct sunlight and moisture.

8. Penyelesaian masalah

• Peranti tidak dihidupkan: Pastikan peranti dicas sepenuhnya. Periksa kabel USB dan sumber kuasa.
• Blades pulling hair: The blades may be dull or require lubrication. Clean the blades thoroughly and apply blade oil. Ensure the battery is sufficiently charged.
• Prestasi pemotongan dikurangkan: Clean the blades, apply oil, and ensure the device is fully charged. If issues persist, contact customer support.

9. Spesifikasi

10. Waranti dan Sokongan

Your DSP Hair Clipper and Trimmer Kit comes with a Waranti 365 hari from the date of purchase. For any questions, technical assistance, or warranty claims, please contact our technical support team. We are dedicated to providing excellent service and support.

Contact information can typically be found on the product packaging or the official DSP webtapak.