MANHATTAN Ultra Slim Rigid TV Wall Mount (Model 461917) Instruction Manual

1. Pengenalan

This manual provides detailed instructions for the safe and proper installation and use of your MANHATTAN Ultra Slim Rigid TV Wall Mount, Model 461917. This fixed wall mount is designed to securely hold large flat and curved screen televisions ranging from 60 to 120 inches, with a maximum load capacity of 120 kg (264 lbs). Please read all instructions carefully before installation to ensure optimal performance and safety.

2. Maklumat Keselamatan

• Kapasiti Berat: Do not exceed the maximum load capacity of 120 kg (264 lbs). Exceeding this limit may result in serious injury or property damage.
• Saiz Skrin: This mount is suitable for TVs between 60 and 120 inches.
• Struktur Dinding: Ensure the mounting surface (wall) can safely support the combined weight of the mount and your television. Wood studs, solid concrete, or concrete block walls are recommended. Do not install on drywall alone.
• Pemasangan Profesional: If you are unsure about the installation process or the suitability of your wall, consult a qualified professional installer.
• Alatan: Gunakan alat yang sesuai untuk pemasangan. Sentiasa memakai cermin mata keselamatan.
• Kanak-kanak: Jauhkan kanak-kanak dari kawasan pemasangan.

3. Kandungan Pakej

Sahkan bahawa semua komponen ada dan tidak rosak sebelum memulakan pemasangan.

• Plat Dinding (1)
• Pendakap TV (2)
• Hardware Kit (screws, washers, spacers, anchors)
• Clip-on Spirit Level (1)

Gambar 1: Lebihview of the MANHATTAN Ultra Slim Rigid TV Wall Mount components, including the wall plate and two TV brackets.

4. Spesifikasi

Figure 2: Illustration of VESA compatibility, showing the range from 50x50 to 900x600.

Figure 3: Detailed technical drawing displaying the dimensions of the wall mount.

5. Persediaan dan Pemasangan

5.1. Alatan Diperlukan (Tidak Termasuk)

• Pensel
• latih tubi
• Pencari Belajar
• Pita Pengukur
• Sepana Soket atau Sepana Boleh Laras
• Pemutar Skru Kepala Phillips

5.2. Attaching TV Brackets to the TV

1. Letakkan TV anda menghadap ke bawah dengan berhati-hati pada permukaan yang lembut dan bersih untuk mengelakkan kerosakan skrin.
2. Kenal pasti lubang pelekap VESA di bahagian belakang TV anda.
3. Pilih skru, pencuci dan spacer yang sesuai daripada kit perkakasan yang sesuai dengan corak VESA TV anda.
4. Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are centered and securely fastened. The pull straps should hang freely below the TV.

Rajah 4: Jarak dekat view of the quick-release spring lock mechanism on the TV bracket, designed for easy installation and removal.

5.3. Mounting the Wall Plate to the Wall

1. Determine the desired height for your TV. Mark the center point on the wall.
2. Use a stud finder to locate at least two adjacent wood studs. Mark their centers. For concrete walls, ensure you use appropriate concrete anchors (included).
3. Position the wall plate against the wall, aligning its mounting holes with the marked stud centers. Use the included clip-on spirit level to ensure the wall plate is perfectly horizontal.
4. Mark the drilling points through the wall plate holes.
5. Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the chosen lag bolts/anchors.
6. Secure the wall plate to the wall using the provided lag bolts and washers. Tighten all bolts firmly, but do not overtighten.

Figure 5: The included clip-on spirit level helps ensure precise horizontal alignment during wall plate installation.

5.4. Hanging the TV

1. With assistance, carefully lift the TV (with brackets attached) and align the TV brackets with the wall plate.
2. Cangkukkan pendakap TV pada tepi atas plat dinding.
3. Gently lower the TV until the quick-release spring locks engage, securing the TV to the wall plate. You should hear an audible click.
4. Pull the release straps to ensure the locks are engaged and the TV is securely mounted.

Rajah 6: Bekasample of a television securely mounted to the wall using the MANHATTAN Ultra Slim Rigid TV Wall Mount.

6. Operasi

Once installed, the MANHATTAN Ultra Slim Rigid TV Wall Mount provides a fixed, low-profile position for your television. To remove the TV from the wall mount:

1. Locate the pull straps hanging below the TV.
2. Pull both straps downwards simultaneously to disengage the quick-release spring locks.
3. With assistance, carefully lift the TV off the wall plate.

7. Penyelenggaraan

• Pembersihan: Lap pelekap dengan kain lembut dan kering. Elakkan pembersih atau pelarut yang kasar.
• Semakan Berkala: Periksa semua skru dan bolt secara berkala untuk memastikan ia kekal ketat dan kukuh.
• kerosakan: If any part of the mount appears damaged or worn, do not use it. Contact customer support for assistance.

8. Penyelesaian masalah

• TV Tidak Aras: Ensure the wall plate was installed horizontally using the spirit level. If not, remove the TV, adjust the wall plate, and re-mount.
• TV Not Engaging Locks: Ensure the TV brackets are correctly aligned with the wall plate and that no cables are obstructing the locking mechanism. Pull the straps to confirm engagement.
• Gunung Terasa Tidak Stabil: Immediately remove the TV. Re-check all wall plate fasteners and ensure they are securely anchored into studs or appropriate concrete. Do not re-mount the TV until stability is confirmed.

9. Waranti dan Sokongan

This MANHATTAN product is covered by a Manufacturer Guarantee. For specific warranty terms, conditions, and duration, please refer to the documentation included with your purchase or visit the official MANHATTAN website. For technical support or assistance with installation, please contact MANHATTAN customer service.

MANHATTAN Customer Support: Please refer to your product packaging or the MANHATTAN webtapak untuk maklumat hubungan semasa.