Zopsc Call to U Caregiver Pager Wireless Alert System User Manual

1. Pengenalan

The Zopsc Call to U Caregiver Pager system is designed to provide reliable and immediate communication between a patient or elderly individual and their caregiver. This wireless system ensures that assistance can be requested quickly and efficiently, enhancing safety and peace of mind in various settings such as homes, nursing facilities, and hospitals.

2. Produk Lebihview

The system consists of a receiver unit and a call button (transmitter). The receiver alerts the caregiver, while the call button is used by the individual needing assistance.

2.1 Komponen

• Penerima: The main unit that receives signals from the call button and emits alerts.
• Call Button (Transmitter): A portable button used to send an alert signal.
• Kabel Pengecasan: For recharging the receiver unit.
• Manual Pengguna: Panduan arahan ini.

2.2 Rajah Produk

Gambar 1: Lebihview of the Zopsc Caregiver Pager system, including the receiver and the call button with its lanyard.

Rajah 2: Depan view of the receiver unit, featuring a musical note icon indicating sound functions.

Rajah 3: Depan view of the call button, clearly marked with a bell icon and "CALL" text.

3. Ciri-ciri

• Panggilan Pantas: Immediate alert message upon pressing the call button during an emergency.
• Isyarat Stabil: Reliable working range up to 330 meters (1082.68 feet) in open areas, ensuring consistent communication.
• Makluman Boleh Disesuaikan: Offers 38 music options and 4-level volume adjustment for personalized alert settings.
• Penggunaan Serbaguna: Suitable for various environments including homes, nursing homes, and hospitals, providing safety for the elderly and patients.
• Reka Bentuk Mudah Alih: Lightweight and compact, making it easy to carry for both indoor and outdoor use.

4. Persediaan

4.1 Charging the Receiver

1. Connect the provided charging cable to the receiver's charging port.
2. Plug the other end of the charging cable into a standard USB power adapter (not included) or a USB port.
3. Allow the receiver to charge fully before first use. The charging indicator light will typically change color or turn off when charging is complete.

4.2 Installing Battery in Call Button

1. Locate the battery compartment on the back of the call button.
2. Buka penutup petak.
3. Insert one 23A battery (60mAh) into the compartment, ensuring correct polarity (+/-).
4. Tutup penutup petak bateri dengan selamat.

Rajah 4: Belakang view of the call button, illustrating the battery compartment for installation.

4.3 Pairing (Matching) Transmitter and Receiver

The system typically comes pre-paired. If re-pairing is needed or if you add additional buttons, follow these general steps:

1. Hidupkan penerima.
2. Press and hold the pairing button on the receiver (refer to receiver diagram for exact location, usually a small button on the side or back) until an indicator light flashes or a sound is heard, indicating pairing mode.
3. Within a few seconds, press the call button (transmitter).
4. The receiver should confirm successful pairing with a sound or light indication.

5. Arahan Operasi

5.1 Membuat Panggilan

To alert the caregiver, simply press the large "CALL" button on the transmitter. The receiver will immediately sound an alarm and/or flash a light, depending on its settings.

Figure 5: Illustrative image of a caregiver responding to a patient's call, demonstrating the product's purpose.

5.2 Adjusting Volume and Music Options

The receiver unit typically has buttons to adjust the volume level and cycle through the available music/alert tones. Refer to the receiver unit for specific button functions (e.g., volume up/down, melody selection button).

Rajah 6: Atas view of both the receiver and call button, showing their relative sizes and designs.

6. Penyelenggaraan

• Pembersihan: Lap unit dengan kain lembut dan kering. Jangan gunakan pembersih yang kasar atau rendam dalam air.
• Penggantian Bateri (Butang Panggilan): Replace the 23A battery in the call button when the signal becomes weak or the button stops functioning.
• Charging (Receiver): Recharge the receiver when the battery is low to ensure continuous operation.
• Storan: Store the pager system in a cool, dry place when not in use for extended periods.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

Untuk maklumat jaminan atau sokongan teknikal, sila rujuk pembungkusan produk atau hubungi peruncit anda. Simpan resit pembelian anda sebagai bukti pembelian.

For further assistance, you may visit the Zopsc official webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.